Den 06.06.2025 14:17, skrev Terje J.
Hanssen:
While
the newer h.264 and hevc are known for best compression, mpeg2 may
have better quality at video bitrate > 30Mbps
This example capture a raw video stream (optional tape playback)
from the camera sensor over HDMI out and transcode audio to PCM
into a high-end mpeg2hd422p.m2ts
-input_format yuyv422 -video_size hd1080 possibly may be commented
out, as the encoder default uses the maximum capability it get
from the capture card ms2130 and driver v4l2
mpeg2video is difficult to get quit perfect with ffmpeg; muxing
overhead: 6.206455% is the minimum I have achieved as in this
case.
At this high bitrate, 39Mbps here, a combination with segmented
recording is suggested and preferred to control the file sizes
(segments) and eventually corrupted parts better.
ffmpeg -hide_banner -f v4l2 -framerate 50 -i /dev/video0 -f alsa
-ac 2 -i hw:CARD=UHD,DEV=0 -c:v mpeg2video -refs 1 -bf 2 -b:v 35M
-maxrate 35M -minrate 35M -bufsize 38M -muxrate 38M -dc 10 -c:a
pcm_bluray -mpegts_m2ts_mode 1 -t 30 -f mpegts
mpeg2hd422p_35M.m2ts
Input #0, video4linux2,v4l2, from '/dev/video0':
Duration: N/A, start: 79.422429, bitrate: 1658880 kb/s
Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422,
1920x1080, 1658880 kb/s, 50 fps, 50 tbr, 1000k tbn
[aist#1:0/pcm_s16le @ 0x55e2664e95c0] Guessed Channel Layout:
stereo
Input #1, alsa, from 'hw:CARD=UHD,DEV=0':
Duration: N/A, start: 1749208971.359170, bitrate: 1536 kb/s
Stream #1:0: Audio: pcm_s16le, 48000 Hz, stereo, s16, 1536 kb/s
Stream mapping:
Stream #0:0 -> #0:0 (rawvideo (native) -> mpeg2video
(native))
Stream #1:0 -> #0:1 (pcm_s16le (native) -> pcm_bluray
(native))
Press [q] to stop, [?] for help
[mpeg2video @ 0x55e2664d0500] Warning vbv_delay will be set to
0xFFFF (=VBR) as the specified vbv buffer is too large for the
given bitrate!
Output #0, mpegts, to 'mpeg2hd422p_35M.m2ts':
Metadata:
encoder : Lavf61.7.100
Stream #0:0: Video: mpeg2video (4:2:2), yuv422p(tv,
progressive), 1920x1080, q=2-31, 35000 kb/s, 50 fps, 90k tbn
Metadata:
encoder : Lavc61.19.101 mpeg2video
Side data:
cpb: bitrate max/min/avg: 35000000/35000000/35000000
buffer size: 38000000 vbv_delay: N/A
Stream #0:1: Audio: pcm_bluray, 48000 Hz, stereo, s16, 128 kb/s
Metadata:
encoder : Lavc61.19.101 pcm_bluray
[out#0/mpegts @ 0x55e2664e9740] video:128445KiB audio:5648KiB
subtitle:0KiB other streams:0KiB global headers:0KiB muxing
overhead: 6.206455%
frame= 1500 fps= 50 q=3.5 Lsize= 142416KiB time=00:00:29.98
bitrate=38915.0kbits/s speed=0.998x
I have been able to tune the ffmpeg specifications further:
- '-profile:v 422p -level:v high' (for mpeg-2 profile 422P@HL)
- '--ch_layout stereo' (as a replacement for '-ac 2' that
caused 'Guessed Channel Layout: stereo')
And also verified the camera HDMI out 'raw video' and 'raw audio'
(pcm) using just the ffmpeg input parts:
ffmpeg -hide_banner -f v4l2 -framerate 50 -i /dev/video0 -f alsa
-ch_layout stereo -i hw:CARD=UHD,DEV=0
Input #0, video4linux2,v4l2, from '/dev/video0':
Duration: N/A, start: 191.096360, bitrate: 1658880 kb/s
Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422,
1920x1080, 1658880 kb/s, 50 fps, 50 tbr, 1000k tbn
Input #1, alsa, from 'hw:CARD=UHD,DEV=0':
Duration: N/A, start: 1749375770.007003, bitrate: 1536 kb/s
Stream #1:0: Audio: pcm_s16le, 48000 Hz, stereo, s16, 1536 kb/s
Attached here is a full ffmpeg debug log file for verification
(command below)
ffmpeg -loglevel debug -f v4l2 -framerate 50 -i /dev/video0 -f alsa
-ch_layout stereo -i hw:CARD=UHD,DEV=0 -c:v mpeg2video -profile:v
422p -level:v high -refs 1 -bf 2 -b:v 35M -maxrate 35M -minrate 35M
-bufsize 38M -muxrate 38M -dc 10 -c:a pcm_bluray -mpegts_m2ts_mode 1
-t 30 -f mpegts mpeg2hd422p_35M.m2ts > mpeg2hd422p_35M.log
2>&1
-----------
Among CinGG's existing m2ts presets
cd /Leap_root/usr/share/cin/ffmpeg/video
ls -1 *m2ts
- avc422.m2ts
- bluray_bff.m2ts
- bluray_dv_ntsc.m2ts
- bluray_dv_pal.m2ts
- bluray_fakeinterlace.m2ts
- bluray_lo.m2ts
- bluray.m2ts
- bluray_tff.m2ts
- hevc422p10.m2ts
- hevc422p8.m2ts
- lossless.m2ts
- visually_lossless.m2ts
grep mpeg2video *m2ts
- That is none so far for mpeg2video HD and 422p
If this preset can be specified and supplemented (?) for use with
pcm_bluray and segmented recording, I can test it next ;)