пн, 11 нояб. 2024 г., 23:43 Terje J. Hanssen <terjejhanssen@gmail.com>:
{snip}
.
hevc_qsv.mp4 revised:
pixel formats p010le and y210le render again to yuv420p10le and .yuv422p10le respectively
Woops; only when these window lines are commented out as written in my previous post !
# profile=mainWorks both with and without
# cin_pix_fmt=nv12
export CIN_10BIT_ENC=1
before cin/bin
we most likely will need new profiles for 10bit everything anyway ...
thanks for continued (and very exhaustive!) testing
Also the preset's combination of pixel formats and the right (ffmpeg) codec profiles would need an overhaul.
As mentioned already above:
hevc_qsv.mp4 revised:
pixel formats p010le and y210le render again to yuv420p10le and .yuv422p10le respectively
Woops; only when these window lines are commented out as written in my previous post !
# profile=main
# cin_pix_fmt=nv12
I experimented additional and got
y210/profile=1 ==> yuv422p10le
y210/ profile=main10/ profile=2/ profile=3 ==> yuv420p10le
I got similar results with my own dynamic Cingg built with ffmpeg 7.1.
--------------------------
So a question beside:
Yesterday I did a new (monthly) upgrade of Tumbleweed-Slowroll, which replaced Packman package libs and ffmpeg 7.1
After that, the static Cingg with onevpl and 10bit patch would not render hevc_qsv.
Today's upgrade with new Packman packages up-to-date with the new Slowroll version, and now Cingg worked as before:
ffmpeg-7 ffmpeg-7-libavcodec-devel ffmpeg-7-libavdevice-devel ffmpeg-7-libavfilter-devel
ffmpeg-7-libavformat-devel ffmpeg-7-libavutil-devel ffmpeg-7-libpostproc-devel ffmpeg-7-libswresample-devel
ffmpeg-7-libswscale-devel libavcodec61 libavdevice61 libavfilter10 libavformat61 libavutil59 libpostproc58
libswresample5 libswscale8
So even Cingg with onevpl is static built, it looks like it is dependent of one or more system packages/libs beside?
Any idea what packages it can be ?
onevpl/vaapi/vdpau - they all linked dynamically (not sure if static version of them even possible)
Ah, I see.
I tried to compare the two configure lines for my full dynamic Cingg/ffmpeg7.1 built and static-dynamic Cingg/ffmpeg7.0 respectively:
./configure --with-single-user --disable-static-build --without-thirdparty --without-libdpx
./configure --with-single-user --with-onevpl
As the first line didn't mention "vpl" I searched backwards and got the understanding that the source code was patched to use the system libvpl.
not exactly, in first case it just uses libav* from system ffmpeg package... and this in your case uses libvpl.
In the second case the build-system itself was patched with onevpl (default off) to use the same system libvpl, I assume?
Is/will possibly the current or upcoming Cingg appimage/rpm available with the onevpl patch, so it can be switched on and tested on other available hardware?
I was about to ask if onevpl patch can be added to git ...
Dear Phyllis, can you add onevpl.patch so future QSV testing will be easier (it defaults to off so should not break anything ... by default).
while there, Terje, can you pack your latest profile work and send it separately? I think we use codec_encoder_additional_params.container as format
so 10bit 420 hevc qsv for mp4 will look like
hevc_qsv_10bit.mp4
with content you experimentally determinated.
and y210 probably will be named
hevc_qsv_y210.mp4
.
(probably made up something in GIMP 2.10, save as tiff/EXR, import in cingg, set format to rgba-float, rendrer ..... hm, may be use YUView to see pixel values independently of cinelerra's decoding abilities? a bit of adventure, but should provide some proof about encoding)
ffprobe -hide_banner cfhd01_hevc_vaapi_pix_p010le.mp4
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'cfhd01_hevc_vaapi_pix_p010le.mp4':
Metadata:
major_brand : isom
minor_version : 512
compatible_brands: isomiso2mp41
encoder : Lavf61.1.100
Duration: 00:01:11.20, start: 0.000000, bitrate: 11082 kb/s
Stream #0:0[0x1](und): Video: hevc (Main 10) (hev1 / 0x31766568), yuv420p10le(tv, bt709/unknown/unknown, top coded first (swapped)), 1920x1080 [SAR 1:1 DAR 16:9], 11080 kb/s, 25 fps, 25 tbr, 12800 tbn (default)
Metadata:
handler_name : VideoHandler
vendor_id : [0][0][0][0]
ffprobe -hide_banner cfhd01_hevc_vaapi_pix_y210.mp4
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'cfhd01_hevc_vaapi_pix_y210.mp4':
Metadata:
major_brand : isom
minor_version : 512
compatible_brands: isomiso2mp41
encoder : Lavf61.1.100
Duration: 00:01:11.20, start: 0.000000, bitrate: 11082 kb/s
Stream #0:0[0x1](und): Video: hevc (Main 10) (hev1 / 0x31766568), yuv420p10le(tv, bt709/unknown/unknown, top coded first (swapped)), 1920x1080 [SAR 1:1 DAR 16:9], 11080 kb/s, 25 fps, 25 tbr, 12800 tbn (default)
Metadata:
handler_name : VideoHandler
vendor_id : [0][0][0][0]
-----
No hevc_vaapi 10bit worked:
localhost:/Cin/ffmpeg/video # cat hevc_vaapi.mp4
mp4 hevc_vaapi
# cin_hw_dev=vaapi
I tested hevc_vaapi.m4 and tried to write p010 both in the pixels field and as format=p010 in the widget,
but only 8bit 420p each time.
-------------------------------
hevc_qsv 10 bit worked with p010 and with y210
localhost:/Cin/ffmpeg/video # cat hevc_qsv.mp4
# only usable with ext. ffmpeg, another pixfmt is yuyv422
mp4 hevc_qsv
# profile=main
# cin_pix_fmt=nv12
ffprobe -hide_banner cfhd01_hevc_qsv_pix_p010le.mp4
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'cfhd01_hevc_qsv_pix_p010le.mp4':
Metadata:
major_brand : isom
minor_version : 512
compatible_brands: isomiso2mp41
encoder : Lavf61.1.100
Duration: 00:01:11.20, start: 0.000000, bitrate: 28276 kb/s
Stream #0:0[0x1](und): Video: hevc (Main 10) (hev1 / 0x31766568), yuv420p10le(tv, bt709/unknown/unknown, top coded first (swapped)), 1920x1080 [SAR 1:1 DAR 16:9], 28273 kb/s, 25 fps, 25 tbr, 12800 tbn (default)
Metadata:
handler_name : VideoHandler
vendor_id : [0][0][0][0]
ffprobe -hide_banner cfhd01_hevc_qsv_pix_y210le.mp4
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'cfhd01_hevc_qsv_pix_y210le.mp4':
Metadata:
major_brand : isom
minor_version : 512
compatible_brands: isomiso2mp41
encoder : Lavf61.1.100
Duration: 00:01:11.20, start: 0.000000, bitrate: 32074 kb/s
Stream #0:0[0x1](und): Video: hevc (Rext) (hev1 / 0x31766568), yuv422p10le(tv, bt709/unknown/unknown, top coded first (swapped)), 1920x1080 [SAR 1:1 DAR 16:9], 32071 kb/s, 25 fps, 25 tbr, 12800 tbn (default)
Metadata:
handler_name : VideoHandler
vendor_id : [0][0][0][0]
you also can set bin/ffmpeg/encode.opts loglevel to debug, but render exactly one frame so log will be smaller.
How to render render exactly one frame ?
In render dialog window there is selection of render range with 4 choices ... 1 frame mp4/webm should be perfectly legal :)
"git log" where?
in cinelerra-5.1 directory, or some down the hierarchy ...
this is command, part of git suite of commands.
displays log of commits in git repo. (for me it uses l"less" as pager, so you can scroll around and search)