Files - bd.m2ts, bd.meta, bd.iso, and bbb-1920x1080-cfg06.mkv test file - are at: https://cinelerra-gg.org/download/testing/tsmuxer_problem_files.tar My guess of whether or not they will execute the AppImage (link below) is below 1% probability: https://cinelerra-gg.org/download/testing/cin-x86_64.AppImage On Wed, Apr 27, 2022 at 1:04 PM Andrew Randrianasulu < [email protected]> wrote:
On Wednesday, April 27, 2022, Phyllis Smith <[email protected]> wrote:
The 30 second and 1 minute 30 second files worked. So I think the last 2 patches are good. I am just going to see if I can put the 99 and 999a patch in 1 file and test that. If that goes well, I think I can check it into GIT.
yes, good idea - sorry I forgot about this detail (5.1 vs 5.1_back) while preparing patches. Hopefully wider testing will show if I get channel order right or there is some need for moving audio tracks into specific configuration... {not sure if this covered in manual}
I will prepare an appimage and upload the files as you requested but it will not be done until later this evening.
thanks a lot!
On Wed, Apr 27, 2022 at 12:16 PM Andrew Randrianasulu < [email protected]> wrote:
On Wednesday, April 27, 2022, Phyllis Smith <[email protected]> wrote:
The file is Big Buck Bunny bbb-1920x1080-cfg06.mkv and probably came from: https://test-videos.co.uk/bigbuckbunny/mkv
Meanwhile I will try a different file -- I use bbb because it is bigger than most of my test cases and then is still only 10 minutes long.
I think most tsmuxer users use it from win/mac.... so, our linux-only program driving Linux tsmuxer with hand-hacked ffmpeg might hit some less-known codepath.. so if you can upload resultant m2ts file somewhere I'll link it into issue, because this is what usually asked tehre - problematic ts file to look at.. ..
If you can prepare appimage with all those patches applied may be someone will test it on Linux too, but I do not hold my breath for this...
On Wed, Apr 27, 2022 at 11:19 AM Andrew Randrianasulu < [email protected]> wrote:
On Wednesday, April 27, 2022, Phyllis Smith <[email protected]> wrote:
Much better - now tsmuxer and profile value seem to be reset appropriately. But now tsmuxer error:
tsMuxeR version 2.6.16-dev. github.com/justdan96/tsMuxer Decoding H264 stream (track 1): Profile: [email protected] Resolution: 1920:1080i Frame rate: 29.97 H.264 muxing fps is not set. Get fps from stream. Value: 29.97 0.0% complete Decoding LPCM stream (track 2): Bitrate: 4608Kbps Sample Rate: 48KHz Channels: 5.1 Bits per sample: 16bit 18.2% complete Finalize ISO disk Reading buffer overflow. Possible container streams are not syncronized. Please, verify stream fps. File name: /tmp/bd_20220427-090605/bd.m2ts
can you provide example stream for tsmuxer's developers? https://github.com/justdan96/tsMuxer/issues
I can enter issue for you, just need link to file in question...
On Tue, Apr 26, 2022 at 7:13 PM Andrew Randrianasulu < [email protected]> wrote:
> > > On Wednesday, April 27, 2022, Phyllis Smith <[email protected]> > wrote: > >> Adding use_tsmuxer = 0 after use_farmed = 0 did not work (I did >> full rebuild just to make sure). There must be a different spot >> It is possible that the 5:1 audio limitation is Fedora? >> > > no, just diff between av_ch_layout_5point1 and > av_ch_layout_5point1_back .... > > > try attached patches? one is for thirdparty/src another for cin > herself.. > > > >> On Tue, Apr 26, 2022 at 6:26 PM Andrew Randrianasulu < >> [email protected]> wrote: >> >>> >>> >>> On Wednesday, April 27, 2022, Phyllis Smith < >>> [email protected]> wrote: >>> >>>> Andrew, 10 million "mega" tests later, I finally figured it out. >>>> Neither the chosen "Profile" or "tsmuxer" setting is getting reset to >>>> "Bluray" for profile and "no tsmuxer" for tsmuxer. >>>> >>>> So what was happening is I loaded a file with 5:1 audio, chose >>>> LPCM and TSMUXER and the error message of: >>>> * [pcm_bluray @ 0x7f002b5ff9c0] Specified channel layout >>>> '5.1' is not supported* >>>> which is fine as long as I document that. But then I would load >>>> Big Buck Bunny (also 5:1 audio) and since I saw that tsmuxer was not >>>> checked and lpcm was not highlighted, I thought is should work and it did >>>> not because both LPCM and TSMUXER will still "on". >>>> >>>> Since I am not sure if I can get it right, could you provide the >>>> lines of code to change so that the profile and tsmuxer are reset to >>>> default "not on" values every time BD Render is chosen from the File >>>> pulldown? Then I can do a final test and check into GIT. Thanks, Phyllis >>>> >>> >>> >>> >>> try to add 'use_tsmuxer = 0; >>> >>> at this block? >>> >>> int CreateBD_Thread:: >>> option_presets() >>> { >>> // reset only probed options >>> use_deinterlace = 0; >>> use_scale = Rescale::none; >>> use_resize_tracks = 0; >>> use_wide_audio = 0; >>> use_labeled = 0; >>> use_farmed = 0; >>> >>> in cinelerra/bdcreate.C? >>> >>> >>> >>>> On Tue, Apr 26, 2022 at 7:22 AM Andrew Randrianasulu < >>>> [email protected]> wrote: >>>> >>>>> >>>>> >>>>> On Tuesday, April 26, 2022, Phyllis Smith < >>>>> [email protected]> wrote: >>>>> >>>>>> Andrew, if instead of choosing lpcm as the profile with the 2 >>>>>> patches in, I choose the standard bluray, it works. >>>>>> >>>>>>> >>>>>>> note, even if file named like c file it actually diff.. >>>>>>> >>>>>>> but both patches as send works for me as after full rebuild.. >>>>>>> / >>>>>>> >>>>>>> if you (re)move those last two patches from tirdparty/src >>>>>>> error (can't find codec..) disappears? >>>>>>> >>>>>> Yes. >>>>>> >>>>> >>>>> >>>>> do you have some other libavcodec headers installed? >>>>> >>>>> what ldd bin/cin (assuming you run from src root for single >>>>> user) says? >>>>> >>>>> >>>>> >>>>>>> >>>>>>>>> but strange. you rebuild cin executable too? (because we >>>>>>>>> link statically I typed "touch cinelerra/new.C" and this forced rebuild >>>>>>>>> of this file and re-linking of executable...) >>>>>>>>> >>>>>>>> I do full rebuilds by running "make clean" which deletes all >>>>>>>> of the thirdparty libraries and then do a full rebuild with "./bld.sh". >>>>>>>> Goes pretty fast on this laptop and it is not worth the aggravation to only >>>>>>>> rebuild changed itemsl >>>>>>>> >>>>>>>>> >>>>>>>>> does ffmpeg from thirdparty lists pcm_bluray as supported >>>>>>>>> encoder? >>>>>>>>> >>>>>>>> It must because what is checked into GIT, lets me choose the >>>>>>>> lpcm profile and on the bluray player, the info button clearly displays it >>>>>>>> as lpcm. >>>>>>>> >>>>>>> >>>>>>> try thirdparty/ffmpeg-4.4/ffmpeg -codecs | grep bluray >>>>>>> >>>>>>> [root@keystone cinelerra-5.1]# thirdparty/ffmpeg-4.4/ffmpeg >>>>>> -codecs | grep bluray >>>>>> DEAI.S pcm_bluray PCM signed 16|20|24-bit big-endian >>>>>> for Blu-ray media >>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> On Mon, Apr 25, 2022 at 2:00 PM Andrew Randrianasulu < >>>>>>>>>> [email protected]> wrote: >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Monday, April 25, 2022, Phyllis Smith < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>>> Andrew, applied ffmpeg-4.4.patch_12 and >>>>>>>>>>>> ffmpeg-4.4.patch99 and it compiles but fails with error message "open >>>>>>>>>>>> failed pcm_bluray:/tmp/bd_date_tme/bd.m2ts" as seen in the attached png >>>>>>>>>>>> file. >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> strange. >>>>>>>>>>> >>>>>>>>>>> can you double-check patches applied correctly (by >>>>>>>>>>> comparing pcm-bluenc.c I attached earlier and actual file in >>>>>>>>>>> thirdparty/ffmpeg/libavcodec? ) >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> On Sun, Apr 24, 2022 at 9:18 AM Andrew Randrianasulu < >>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Paul fixed bug preventing tsmuxer from recognizing our >>>>>>>>>>>>> lpcm audio stream >>>>>>>>>>>>> >>>>>>>>>>>>> I backshoed fix into our ffmpeg 4.4.. >>>>>>>>>>>>> >>>>>>>>>>>>> I think having it all worked in monthly release quite >>>>>>>>>>>>> important, even if names of patches kinda high... >>>>>>>>>>>>> >>>>>>>>>>>>> also attached raw pcm-bluenc file as I hacked it, and >>>>>>>>>>>>> fix/patch as downloaded from gitweb.. >>>>>>>>>>>>> >>>>>>>>>>>>> https://github.com/justdan96/tsMuxer/issues/580 >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> https://git.ffmpeg.org/gitweb/ffmpeg.git/blobdiff/037fa0437d2aead40c1f786c6a... >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> https://git.ffmpeg.org/gitweb/ffmpeg.git/commit/93dfb6afddb278218da7f8c696bf... >>>>>>>>>>>>> >>>>>>>>>>>>