Re: [Cin] New thread on Mount and extract bdwrite from CinGG-appimage

24 Nov 2022

      чт, 24 нояб. 2022 г., 21:05 Terje J. Hanssen <[email protected]>:
...
Den 24.11.2022 02:34, skrev Andrew Randrianasulu:
...
ср, 23 нояб. 2022 г., 23:27 Terje J. Hanssen <[email protected]>:
Den 22.11.2022 21:50, skrev Terje J. Hanssen:
    >
    >
    > Den 22.11.2022 18:21, skrev Andrew Randrianasulu:
    >>
    >>
    >> вт, 22 нояб. 2022 г., 19:53 Terje J. Hanssen
    <[email protected]>:
    >>
    >>
    >>
    >>     Den 22.11.2022 16:30, skrev Andrew Randrianasulu:
    >>>
    >>>
    >>>     вт, 22 нояб. 2022 г., 00:20 Terje J. Hanssen
    >>>     <[email protected]>:
    >>>
    >>>
    >>>
    >>>         Den 13.11.2022 00:07, skrev Andrew Randrianasulu:
    >>>         >
    >>>         >
    >>>         > сб, 12 нояб. 2022 г., 21:43 Terje J. Hanssen
    >>>         <[email protected]>:
    >>>         >
    >>>         >     Derived from another thread "HDV files at
    archive.org <http://archive.org>
    >>>         <http://archive.org>
    >>>         >     <http://archive.org>" I extract and continue this
    >>>         topic in a new
    >>>         >     thread here.
    >>>         >     And if this isn't documented yet, I suggest some
    with
    >>>         knowledge to
    >>>         >     setup a Readme and manual section for this.
    >>>         >
    >>>         >
    >>>         >
    >>>         >
    >>>         > already there
    >>>         >
    >>>         >
    >>>
https://cinelerra-gg.org/download/CinelerraGG_Manual/Managing_AppImage.html#...
...
>>>         >
    >>>         I think I didn't recognized this section equivalent to
the
...
>>>         appimage
    >>>         user-guide section.
    >>>
    >>>         >
    >>>         > try to just unpack appimage and then set
    >>>         >
    >>>         > export LD_LIBRARY_PATH=$BCASTDIR:$LD_LIBRARY_PATH
    >>>         >
    >>>         > where $BCASTDIR points at unpacked/mounted
    appimages's usr/lib
    >>>         >
    >>>         > before running bdwrite
    >>>         >
    >>>
    >>>         While waiting for my ordered BD-R/RE discs, I have tried
    >>>         again and
    >>>         attach the new terminal output with comments as follows:
    >>>
    >>>  /home/terje/Applications/CinGG-20221031-x86_64.AppImage
    >>>         --appimage-offset
    >>>         (AppImageLauncher:16794): GdkPixbuf-CRITICAL **:
    20:50:50.433:
    >>>         gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF
    (pixbuf)' failed
    >>>         189632
    >>>
    >>>         sudo mount
    >>>  /home/terje/Applications/CinGG-20221031-x86_64.AppImage
    >>>         /home/terje/mountpoint/ -o offset=189632
    >>>         [sudo] passord for root:
    >>>
    >>>
    >>>         find /home/terje/mountpoint -name lib
    >>>         /home/terje/mountpoint/usr/lib
    >>>
    >>>         export
    >>>  LD_LIBRARY_PATH=/home/terje/mountpoint/usr/lib:$LD_LIBRARY_PATH
    >>>
    >>>         ls -la 2008_m2t_pcm_bluray.mts
    >>>         -rw-r--r-- 1 terje users 47020032 Nov 11 22:06
    >>>         2008_m2t_pcm_bluray.mts
    >>>
    >>>
    >>>         mkudffs -b 2048 /tmp/newfilename.udfs 27055
    >>>         filename=/tmp/newfilename.udfs
    >>>         label=LinuxUDF
    >>>         uuid=637bd9b8ea861ad7
    >>>         blocksize=2048
    >>>         blocks=27055
    >>>         udfrev=201
    >>>         start=0, blocks=16, type=RESERVED
    >>>         start=16, blocks=3, type=VRS
    >>>         start=19, blocks=237, type=USPACE
    >>>         start=256, blocks=1, type=ANCHOR
    >>>         start=257, blocks=16, type=PVDS
    >>>         start=273, blocks=1, type=LVID
    >>>         start=274, blocks=26524, type=PSPACE
    >>>         start=26798, blocks=1, type=ANCHOR
    >>>         start=26799, blocks=239, type=USPACE
    >>>         start=27038, blocks=16, type=RVDS
    >>>         start=27054, blocks=1, type=ANCHOR
    >>>
    >>>         mount -o loop /tmp/newfilename.udfs /mnt/test
    >>>
    >>>         find /home/terje/mountpoint -name bdwrite
    >>>  /home/terje/mountpoint/usr/bin/bdwrite
    >>>
    >>>  /home/terje/mountpoint/usr/bin/bdwrite /mnt/test
    >>>         2008_m2t_pcm_bluray.mts
    >>>
    >>>         No interlace error !
    >>>         --------------------
    >>>
    >>>         ls /mnt/test
    >>>         BDMV  CERTIFICATE
    >>>
    >>>         tree -h /mnt/test/BDMV
    >>>         /mnt/test/BDMV
    >>>         ├── [  40]  AUXDATA
    >>>         ├── [ 332]  BACKUP
    >>>         │   ├── [  40]  BDJO
    >>>         │   ├── [  92]  CLIPINF
    >>>         │   │   └── [ 480]  00000.clpi
    >>>         │   ├── [  40]  JAR
    >>>         │   ├── [ 110]  MovieObject.bdmv
    >>>         │   ├── [  92]  PLAYLIST
    >>>         │   │   └── [ 184]  00000.mpls
    >>>         │   └── [ 124]  index.bdmv
    >>>         ├── [  40]  BDJO
    >>>         ├── [  92]  CLIPINF
    >>>         │   └── [ 480]  00000.clpi
    >>>         ├── [  40]  JAR
    >>>         ├── [  40]  META
    >>>         ├── [ 110]  MovieObject.bdmv
    >>>         ├── [  92]  PLAYLIST
    >>>         │   └── [ 184]  00000.mpls
    >>>         ├── [  92]  STREAM
    >>>         │   └── [ 45M]  00000.m2ts
    >>>         └── [ 124]  index.bdmv
    >>>
    >>>         12 directories, 9 files
    >>>
    >>>  ---------------------------------------
    >>>
    >>>         Finally 9 files and [ 45M] 00000.m2ts
    >>>
    >>>         I was able to open /mnt/test/BDMV with VLC and playback
    >>>         video and
    >>>         pcm_bluray video OK
    >>>
    >>>  ------------------------------------------------------
    >>>         but not with mplayer as follows:
    >>>
    >>>
    >>>         umount /mnt/test
    >>>
    >>>         which mplayer
    >>>         /usr/bin/mplayer
    >>>
    >>>         mplayer -vo null br://tmp/newfilename.udfs
    >>>         Creating config file: /root/.mplayer/config
    >>>         MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team
    >>>         do_connect: could not connect to socket
    >>>         connect: No such file or directory
    >>>         Failed to open LIRC support. You will not be able to use
    >>>         your remote
    >>>         control.
    >>>
    >>>         Playing br://tmp/newfilename.udfs.
    >>>         The hostname option must be an integer: tmp
    >>>         Struct bluray, field hostname parsing error: tmp
    >>>         disc.c:333: failed opening UDF image newfilename.udfs
    >>>         disc.c:437: error opening file BDMV/index.bdmv
    >>>         disc.c:437: error opening file BDMV/BACKUP/index.bdmv
    >>>         bluray.c:2646: nav_get_title_list(newfilename.udfs/)
    failed
    >>>         Couldn't open Blu-ray device: newfilename.udfs
    >>>         No stream found to handle url br://tmp/newfilename.udfs
    >>>
    >>>
    >>>         Exiting... (End of file)
    >>>
    >>>
    >>>
    >>>     mplayer works for me if I start it from /tmp (where test
    file is
    >>>     located)
    >>
    >>     I will try also that next.
    >>
===============================
    23/11-22
    ===============================
mplayer continued
-- sorry, the following long output as root, seems like lack og audio
    config and other errors?
yeah ... but again, you can try to make this udfs file readable for
usual user and try again ...
anyway, I historically used mplayer because it was faster to build and
rebuild afresh, compared to vlc with million deps.  If it works in VLC
- I think you can try and move into experiments with longer files.
============================
24/11-22
Testing playback with VLC and Mplayer as user on (mounted)
/tmp/test/BDMV and on (unmounted) /tmp/newfilename.udfs
=============================
VlC as user playbacks video and audio OK recursively from (mounted)
/mnt/test/BDMV, but with some failed messages:
terje@localhost:~> vlc /mnt/test/BDMV
VLC media player 3.0.17.3 Vetinari (revision 3.0.13-8-g41878ff4f2)
libdvdread: Encrypted DVD support unavailable.
libdvdread: Couldn't find device name.
[000055828618fd30] main libvlc: Running vlc with the default interface.
Use 'cvlc' to use vlc without interface.
libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use
QT_QPA_PLATFORM=wayland to run on Wayland anyway.
libdvdread: Encrypted DVD support unavailable.
libdvdread: Couldn't find device name.
libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
[00007f2208001160] dvdnav demux error: vm: vm: failed to read VIDEO_TS.IFO
libdvdread: Encrypted DVD support unavailable.
libdvdread: Couldn't find device name.
libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdread: Encrypted DVD support unavailable.
libdvdread: Couldn't find device name.
libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdread: Encrypted DVD support unavailable.
libdvdread: Couldn't find device name.
libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
...................
[00007f2260004030] dvdnav demux error: vm: vm: failed to read VIDEO_TS.IFO
libdvdread: Encrypted DVD support unavailable.
libdvdread: Couldn't find device name.
libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
[00007f226000b8f0] dvdnav demux error: vm: vm: failed to read VIDEO_TS.IFO
[00007f2204008cc0] gl gl: Initialized libplacebo v4.192.1 (API v192)
[00007f2204008cc0] gl gl: Initialized libplacebo v4.192.1 (API v192)
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared
object file: Ingen slik fil eller filkatalog
[00007f220505f950] gl gl: Initialized libplacebo v4.192.1 (API v192)
QObject::~QObject: Timers cannot be stopped from another thread
=============================
Mplayer as user doesn't playback/find audio and video with just path to
/mnt/test/BDMV
Mplayer as user playback audio an video just with full path to
/mnt/test/BDMV/STREAM/00000.m2ts
--------------
terje@localhost:~> mplayer /mnt/test/BDMV/STREAM/00000.m2ts
MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team
do_connect: could not connect to socket
connect: No such file or directory
Failed to open LIRC support. You will not be able to use your remote
control.
Playing /mnt/test/BDMV/STREAM/00000.m2ts.
libavformat version 58.76.100 (external)
TS file format detected.
VIDEO MPEG2(pid=4113) AUDIO PCMBR(pid=4352) NO SUBS (yet)!  PROGRAM N. 1
VIDEO:  MPEG2  1440x1080  (aspect 3)  25.000 fps  25000.0 kbps (3125.0
kbyte/s)
X11 error: BadMatch (invalid parameter attributes)
[VO_XV] It seems there is no Xvideo support for your video card available.
[VO_XV] Run 'xvinfo' to verify its Xv support and read
[VO_XV] DOCS/HTML/en/video.html#xv!
[VO_XV] See 'mplayer -vo help' for other (non-xv) video out drivers.
[VO_XV] Try -vo x11.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 58.134.100 (external)
[mpeg2video @ 0x7fb394081560]Requested frame threading with a custom
get_buffer2() implementation which is not marked as thread safe. This is
not supported anymore, make your callback thread-safe.
Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
Load subtitles in /mnt/test/BDMV/STREAM/
==========================================================================
Trying to force audio codec driver family libmad...
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000)
Selected audio codec: [fflpcm] afm: ffmpeg (Blu-ray LPCM)
==========================================================================
AO: [pulse] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
Bad stream state, please report as bug!
Movie-Aspect is undefined - no prescaling applied.
VO: [x11] 1440x1080 => 1440x1080 Planar YV12  [zoom]
[swscaler @ 0x7fb39a79c0e0]bicubic scaler, from yuv420p to bgra using
MMXEXT
[swscaler @ 0x7fb39a79c0e0]using unscaled yuv420p -> bgra special converter
Bad stream state, please report as bug!
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [x11] 1440x1080 => 1920x1080 Planar YV12  [zoom]
A:   1.5 V:   1.4 A-V:  0.106 ct:  0.000   2/  2 ??% ??% ??,?% 0 0
Bad stream state, please report as bug!
A:   1.5 V:   1.5 A-V:  0.068 ct: -0.000   3/  3 ??% ??% ??,?% 1 0
Bad stream state, please repo
..................snip
Bad stream state, please report as bug!
A:  14.7 V:  14.7 A-V:  0.016 ct:  0.002 333/333 12% 20%  0.8% 1 0
Bad stream state, please report as bug!
A:  14.7 V:  14.7 A-V:  0.006 ct:  0.002 334/334 12% 20%  0.8% 1 0
Bad stream state, please report as bug!
A:  14.8 V:  14.8 A-V:  0.079 ct:  0.110 335/335 12% 20%  0.8% 1 0
Exiting... (End of file)
#############################
I'm a bit confused and would like to get clarified what really happends
when/after entering "umount /mnt/test"?
That is the difference between using /tmp/test and /tmp/newfilename.udf
well, with file still mounted to some directory you basically use kernel's
udf implementation for getting blocks corresponding to this ts file in
order ...

when you unmount it players must figure out filesystem inside file
themselves.
...
=======================
VlC as user playbacks video and audio OK from newfilename.udfs
------------------
terje@localhost:/tmp> vlc
VLC media player 3.0.17.3 Vetinari (revision 3.0.13-8-g41878ff4f2)
[00005643603ead30] main libvlc: Running vlc with the default interface.
Use 'cvlc' to use vlc without interface.
Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use
QT_QPA_PLATFORM=wayland to run on Wayland anyway.
[00007fd4a0001170] libbluray demux: First play: 1, Top menu: 1
HDMV Titles: 1, BD-J Titles: 0, Other: 0
[00007fd4a0001170] libbluray demux: Adding ES 4113 select 1
[00007fd4a0001170] libbluray demux: Adding ES 4352 select 1
[00007fd48c007260] gl gl: Initialized libplacebo v4.192.1 (API v192)
[00007fd48c007260] gl gl: Initialized libplacebo v4.192.1 (API v192)
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared
object file: Ingen slik fil eller filkatalog
[00007fd48d016510] gl gl: Initialized libplacebo v4.192.1 (API v192)
hdmv_vm.c:450: _resume_from_play_pl(): object not playing playlist !
hdmv_vm.c:450: _resume_from_play_pl(): object not playing playlist !
hdmv_vm.c:450: _resume_from_play_pl(): object not playing playlist !
hdmv_vm.c:450: _resume_from_play_pl(): object not playing playlist !
[00007f9c84001170] libbluray demux: Closing overlays.
QObject::~QObject: Timers cannot be stopped from another thread
#####################
Mplayer as user playback only Audio from /tmp/newfilename.udfs
remove -vo null  (you can try -vo help for list of video output methods,
same for audio with -ao help. you can put your preferences in
.mplayer/config later) or check if your user can connect to X server from
given terminal (emulator).

I managed to kill my access by deleting .Xauthority file while trying to
figure why ssh -X was not working ...

thankfully it was recreated automatically after I killed X and restarted
them again ....
...
-----------------------
terje@localhost:/tmp> mplayer -vo null br://tmp/newfilename.udfs
MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team
do_connect: could not connect to socket
connect: No such file or directory
Failed to open LIRC support. You will not be able to use your remote
control.
Playing br://tmp/newfilename.udfs.
The hostname option must be an integer: tmp
Struct bluray, field hostname parsing error: tmp
libavformat version 58.76.100 (external)
bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip
66600-667800.
bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip
66600-667800.
TS file format detected.
bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip
66600-667800.
VIDEO MPEG2(pid=4113) AUDIO PCMBR(pid=4352) NO SUBS (yet)!  PROGRAM N. 1
bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip
66600-667800.
VIDEO:  MPEG2  1440x1080  (aspect 3)  25.000 fps  25000.0 kbps (3125.0
kbyte/s)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 58.134.100 (external)
[mpeg2video @ 0x7f3dc0bf3560]Requested frame threading with a custom
get_buffer2() implementation which is not marked as thread safe. This is
not supported anymore, make your callback thread-safe.
Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
==========================================================================
Trying to force audio codec driver family libmad...
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000)
Selected audio codec: [fflpcm] afm: ffmpeg (Blu-ray LPCM)
terje@localhost:/tmp> mplayer -vo null br://tmp/newfilename.udfs
MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team
do_connect: could not connect to socket
connect: No such file or directory
Failed to open LIRC support. You will not be able to use your remote
control.
Playing br://tmp/newfilename.udfs.
The hostname option must be an integer: tmp
Struct bluray, field hostname parsing error: tmp
libavformat version 58.76.100 (external)
bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip
66600-667800.
bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip
66600-667800.
TS file format detected.
bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip
66600-667800.
VIDEO MPEG2(pid=4113) AUDIO PCMBR(pid=4352) NO SUBS (yet)!  PROGRAM N. 1
bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip
66600-667800.
VIDEO:  MPEG2  1440x1080  (aspect 3)  25.000 fps  25000.0 kbps (3125.0
kbyte/s)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 58.134.100 (external)
[mpeg2video @ 0x7fbf5abde560]Requested frame threading with a custom
get_buffer2() implementation which is not marked as thread safe. This is
not supported anymore, make your callback thread-safe.
Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
==========================================================================
Trying to force audio codec driver family libmad...
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000)
Selected audio codec: [fflpcm] afm: ffmpeg (Blu-ray LPCM)
==========================================================================
AO: [pulse] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
Bad stream state, please report as bug!
Movie-Aspect is undefined - no prescaling applied.
VO: [null] 1440x1080 => 1440x1080 Planar YV12  [zoom]
Bad stream state, please report as bug!
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [null] 1440x1080 => 1920x1080 Planar YV12  [zoom]
A:   1.5 V:   1.4 A-V:  0.084 ct:  0.000   2/  2 ??% ??% ??,?% 0 0
Bad stream state, please report as bug!
A:   1.5 V:   1.5 A-V:  0.052 ct:  0.004   3/  3 ??% ??% ??,?% 0 0
Bad stream state, please report as bug!
A:   1.6 V:   1.5 A-V:  0.044 ct:  0.008   4/  4 ??% ??% ??,?% 0 0
Bad stream state, please report as bug!
A:   1.6 V:   1.6 A-V:  0.032 ct:  0.011   5/  5 ??% ??% ??,?% 0 0
Bad stream state, please report as bug!
A:   1.6 V:   1.6 A-V:  0.029 ct:  0.014   6/  6 ??% ??% ??,?% 0 0
Bad stream state, please report as bug!
A:   1.7 V:   1.6 A-V:  0.026 ct:  0.016   7/  7 ??% ??% ??,?% 0 0
Bad stream state, please report as bug!
A:   1.7 V:   1.7 A-V:  0.023 ct:  0.019   8/  8 ??% ??% ??,?% 0 0
Bad stream state, please report as bug!
A:   1.7 V:   1.7 A-V:  0.021 ct:  0.021   9/  9 ??% ??% ??,?% 0 0
Bad stream state, please report as bug!
A:   1.8 V:   1.8 A-V:  0.019 ct:  0.022  10/ 10 ??% ??% ??,?% 0 0
Bad stream state, please report as bug!
A:   1.8 V:   1.8 A-V:  0.017 ct:  0.024  11/ 11 ??% ??% ??,?% 0 0
Bad stream state, please report as bug!
A:   1.9 V:   1.8 A-V:  0.016 ct:  0.026  12/ 12 ??% ??% ??,?% 0 0
Bad stream state, please report as bug!
........snip
Bad stream state, please report as bug!
A:  14.7 V:  14.7 A-V:  0.000 ct:  0.040 333/333 10%  0%  0.4% 0 0
Bad stream state, please report as bug!
A:  14.7 V:  14.7 A-V:  0.000 ct:  0.040 334/334 10%  0%  0.4% 0 0
Bad stream state, please report as bug!
A:  14.7 V:  14.8 A-V: -0.027 ct:  0.132 335/335 10%  0%  0.4% 0 0
Exiting... (End of file)
================================
...
localhost:~ # cd /tmp
    localhost:/tmp # mplayer -vo null br://tmp/newfilename.udfs
    MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team
    do_connect: could not connect to socket
    connect: No such file or directory
    Failed to open LIRC support. You will not be able to use your remote
    control.
Playing br://tmp/newfilename.udfs.
    The hostname option must be an integer: tmp
    Struct bluray, field hostname parsing error: tmp
    libavformat version 58.76.100 (external)
    bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip
    66600-667800.
    bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip
    66600-667800.
    TS file format detected.
    bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip
    66600-667800.
    VIDEO MPEG2(pid=4113) AUDIO PCMBR(pid=4352) NO SUBS (yet)!
    PROGRAM N. 1
    bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip
    66600-667800.
    VIDEO:  MPEG2  1440x1080  (aspect 3)  25.000 fps  25000.0 kbps
    (3125.0
    kbyte/s)
==========================================================================
...
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
    libavcodec version 58.134.100 (external)
    [mpeg2video @ 0x7fd57c9aa560]Requested frame threading with a custom
    get_buffer2() implementation which is not marked as thread safe.
    This is
    not supported anymore, make your callback thread-safe.
    Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
...
==========================================================================
...
Trying to force audio codec driver family libmad...
    Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
    AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio:
    192000->192000)
    Selected audio codec: [fflpcm] afm: ffmpeg (Blu-ray LPCM)
==========================================================================
...
AO: [pulse] Init failed: Connection refused
    Failed to initialize audio driver 'pulse'
    [AO_ALSA] alsa-lib: pulse.c:243:(pulse_connect) PulseAudio: Unable to
    connect: Connection refused
[AO_ALSA] Playback open error: Connection refused
    Failed to initialize audio driver 'alsa'
    [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such
    file or
    directory
    Failed to initialize audio driver 'oss'
    No such audio driver 'esd'
    No such audio driver 'arts'
    [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such
    file or
    directory
    [AO_ALSA] alsa-lib: pulse.c:243:(pulse_connect) PulseAudio: Unable to
    connect: Connection refused
[AO_ALSA] Playback open error: Connection refused
    AO: [pulse] Init failed: Connection refused
    Cannot connect to server socket err = No such file or directory
    Cannot connect to server request channel
    jack server is not running or cannot be started
    JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1,
    skipping unlock
    JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1,
    skipping unlock
    [JACK] cannot open server
    [AO SDL] Samplerate: 48000Hz Channels: Stereo Format s16le
    [AO_ALSA] alsa-lib: pulse.c:243:(pulse_connect) PulseAudio: Unable to
    connect: Connection refused
[AO SDL] Unable to open audio: No available audio device
    DVB card number must be between 1 and 4
    AO: [null] 48000Hz 2ch s16le (2 bytes per sample)
    Starting playback...
    Bad stream state, please report as bug!
    Movie-Aspect is undefined - no prescaling applied.
    VO: [null] 1440x1080 => 1440x1080 Planar YV12  [zoom]
    Bad stream state, please report as bug!
    Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
    VO: [null] 1440x1080 => 1920x1080 Planar YV12  [zoom]
    A:   1.5 V:   1.4 A-V:  0.054 ct:  0.000   2/  2 ??% ??% ??,?% 0 0
    Bad stream state, please report as bug!
    .....snip
    ...........
Bad stream state, please report as bug!
    A:  14.7 V:  14.7 A-V: -0.000 ct:  0.040 334/334 10%  0% 0.7% 0 0
    Bad stream state, please report as bug!
    A:  14.8 V:  14.8 A-V:  0.080 ct:  0.148 335/335 10%  0% 0.7% 0 0
Exiting... (End of file)
==========================
>>     But thinking more about this topic that has several cumbersome
    >>     and error-phrone manual steps. Appimage has even complicated
    >>     these, not at least for occasionally users.
    >>     Therefore I will throw in the following suggestion or RFE:
    >>
    >>     Will it be possible or manageable to integrate and run the
    >>     bundled 'bdwrite' to Bluray within the Cin-GG's run-time
    environment?
    >>     I.e we now has File > BD render (and DVD render). What to add
    >>     File > "BD Write" and get sub-window with options to select
    >>     HDV/mpeg2 without re-encoding (compression loss) of video from
    >>     HDD file, select re-encoding of the MP2 audio to AC3 or PCM
for
...
>>     Blu-ray etc.
    >>
    >>
    >>
    >>
    >> may be try to encapsulate manual steps into bash script and
    then run
    >> this script from shell commands system? (not sure how to handle
    sudo
    >> password entering .... xdialog conditional on X DISPLAY
    variable? ah
    >> someone suggested 'sudo -A' and custom script
    >>
https://askubuntu.com/questions/314395/proper-way-to-let-user-enter-password...
...
>> )
    >>
    >>
https://cinelerra-gg.org/download/CinelerraGG_Manual/Menu_Bar_Shell_Commands...
...
>>
    >> if we develop it into being even relatively distro-agnostic and
    >> error-proof it hopefully can be included into future versions
    of CinGG
    >>
    >> making mpeg2 hdv compatible _encoding_ profile is also on table, I
    >> think ... (this one can be integrated at Blu-ray specific menu
    >> choice, because I put some lines of code in there for
    supporting pcm
    >> audio on h264 encoded BD)
    >>
    >>
    >> I also found some remaints of direct-copy 'smart-render-like'
    feature
    >> in Cinelerra-CV's libquicktime:
    >>
    >>
https://github.com/cinelerra-cv-team/cinelerra-cv/blob/954a91e72bba1ed1ce641...
...
>>
    >> around line 730 but it was only working (apparently) with some
    mpeg4
    >> _divx_ movs, not mpeg2s.
    >>
    >> developing mpeg direct-copy routines remained big TODO item. I
    look
    >> at related code from time to time but no promises, sadly.
    >>
    >>
    >
    > I just add my extracted notes and urls about Smart rendering HDV in
    > Vegas, Premiere Pro:
    >
    > What is smart rendering?
    > Smart Render *analyzes a video for any previously rendered sections
    > and renders only the new or revised sections*. This can reduce
    > rendering time significantly. Corel VideoStudio's SmartRender
    feature
    > makes previewing and creating movies a lot faster.
    >
    >
    >   How To Enable Smart Render
    >
    > You can enable smart render with video editing software like
    > VideoStudio. Follow along with our tutorial below to learn the
    easiest
    > way to enable smart render. Rendering can take an enormous
    amount of
    > time in video editing, especially when the video is long and
    includes
    > a large number of effects. VideoStudio has implemented a smart
    render
    > system to speed that process up and only render the parts of the
    film
    > that need rendering. Read on to find out how it works.
    >
    > Smart Render analyzes a video for any previously rendered
    sections and
    > renders only the new or revised sections. This can reduce rendering
    > time significantly.
    >
    > Corel VideoStudio’s SmartRender feature makes previewing and
    creating
    > movies a lot faster. When you preview your video project for the
    first
    > time, VideoStudio ‘renders’ the project by creating a temporary
    > preview file on your hard drive which combines the video, image,
    and
    > audio clips with the special effects which you applied to them. The
    > SmartRender feature detects any changes in your project and if
    there
    > are no changes, instantly plays back the preview file. If there are
    > changes (for instance, when titles, video filters or transition
    > effects have been added), it renders out only the edited portions,
    > making render times much shorter and faster.
    >
    >
    >
https://www.vegascreativesoftware.info/us/forum/hdv-smart-rendering-and-bada...
...
> https://www.dvinfo.net/forum/archive/index.php/t-116464.html
    >
    > https://helpx.adobe.com/premiere-pro/using/smart-rendering.html
    >
    >
https://larryjordan.com/articles/premiere-pro-export-faster-with-smart-rende...
...
>
    > https://workflow.frame.io/guide/smart-rendering
    >
    >
https://blog.frame.io/2021/06/07/premiere-pro-max-render-quality-max-bit-dep...
...
>
    > https://www.kevinmonahan.net/?p=88
    >
    >
    >
    >>
    >>
    >>
    >>
    >>
    >>
    >>     After all, Blu-ray images on BD-R/RE discs and possible
simpler
...
>>     DVD-R/RW discs for exchange, are more reliable and playable
    >>     backups for video on tape or HDD.
    >>
    >>
    >>
    >>
    >>
    >>
    >>>
    >>>
    >>>
    >>>
    >>>
    >>>
    >>>
    >>>
    >>>         >
    >>>         >
    >>>         >
    >>>         >     Den 12.11.2022 16:36, skrev Andrew Randrianasulu:
    >>>         >     >
    >>>         >     >
    >>>         >     > сб, 12 нояб. 2022 г., 18:30 Terje J. Hanssen
    >>>         >     <[email protected]>
    >>>         <mailto:[email protected]>:
    >>>         >     >
    >>>         >
    >>>         >     >     "Finally home again", just to discover that I
    >>>         have not
    >>>         >     'bdwrite' available on my workstations upgraded
with
...
>>>         the latest
    >>>         >     31. Oct 2022 CinGG appimages.
    >>>         >     >     Therefore I wonder if CinGG Appimage not
    provide
    >>>         and make it
    >>>         >     possible to run bdwrite from command line (similar
    >>>         like no ffmpeg)
    >>>         >     without a single user build?
    >>>         >     >
    >>>         >     >
    >>>         >     > I think you can unpack/mount appimages .
    >>>         >     >
    >>>         >     >
    >>>         >
    >>>
https://docs.appimage.org/user-guide/run-appimages.html#mount-an-appimage
...
>>>         >     >
    >>>         >     > then you hopefully will find bdwrite inside ....
    >>>         >     >
    >>>         >     > or slightly down this question  documentation
said
...
>>>         you can
    >>>         >     extract content of appimage into directory. So,
    if bdwrite
    >>>         >     actually there you can run it from there or copy
    it to
    >>>         some place
    >>>         >     >
    >>>         >
    >>>         >
    >>>         >     1)
    >>>         >     First attempt as Type 1 appimage:
    >>>         >
    >>>         >     terje@localhost:~> sudo mount
    >>>         >
/home/terje/Applications/CinGG-20221031-x86_64.AppImage
...
>>>         >     /home/terje/mountpoint/
    >>>         >
    >>>         >     [sudo] passord for root:
    >>>         >     mount: /home/terje/mountpoint: wrong fs type, bad
    >>>         option, bad
    >>>         >     superblock on /dev/loop0, missing codepage or
helper
...
>>>         program, or
    >>>         >     other error.
    >>>         >
    >>>         >     terje@localhost:~> umount /home/terje/mountpoint/
    >>>         >     umount: /home/terje/mountpoint: not mounted.
    >>>         >
    >>>         >
    >>>         >     2)
    >>>         >     Second attempt as Type 2 appimage:
    >>>         >
    >>>         >     terje@localhost:~>
    >>>         >
/home/terje/Applications/CinGG-20221031-x86_64.AppImage
...
>>>         >     --appimage-offset
    >>>         >
    >>>         >     but why all these warnings and failed messages?
    >>>         >     ----------
    >>>         >
    >>>         >     /usr/bin/AppImageLauncher:
    /usr/lib64/libcurl.so.4: no
    >>>         version
    >>>         >     information available (required by
    >>>         >
    >>>
/usr/bin/../lib/x86_64-linux-gnu/appimagelauncher/libappimageupdate.so)
...
>>>         >     Warning: Ignoring XDG_SESSION_TYPE=wayland on
    Gnome. Use
    >>>         >     QT_QPA_PLATFORM=wayland to run on Wayland anyway.
    >>>         >
    >>>         >     ** (AppImageLauncher:7534): WARNING **:
    17:40:13.433:
    >>>         Pixbuf
    >>>         >     theme: Cannot load pixmap file
    >>>         >
    >>>
      /usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png:
    >>>         >     Feil under lasting av bilde
    >>>         >
    >>>
«/usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png»:
...
>>>         >     Fatal feil i PNG-bildefil: bad parameters to zlib
    >>>         >
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_width: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     ** (AppImageLauncher:7534): WARNING **:
    17:40:13.433:
    >>>         Invalid
    >>>         >     borders specified for theme pixmap:
    >>>         >
    >>>
      /usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png,
    >>>         >     borders don't fit within the image
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >  gdk_pixbuf_get_pixels_with_length: assertion
    >>>         'GDK_IS_PIXBUF
    >>>         >     (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >  gdk_pixbuf_get_pixels_with_length: assertion
    >>>         'GDK_IS_PIXBUF
    >>>         >     (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >  gdk_pixbuf_get_pixels_with_length: assertion
    >>>         'GDK_IS_PIXBUF
    >>>         >     (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >  gdk_pixbuf_get_pixels_with_length: assertion
    >>>         'GDK_IS_PIXBUF
    >>>         >     (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >  gdk_pixbuf_get_pixels_with_length: assertion
    >>>         'GDK_IS_PIXBUF
    >>>         >     (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >  gdk_pixbuf_get_pixels_with_length: assertion
    >>>         'GDK_IS_PIXBUF
    >>>         >     (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >  gdk_pixbuf_get_pixels_with_length: assertion
    >>>         'GDK_IS_PIXBUF
    >>>         >     (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >  gdk_pixbuf_get_pixels_with_length: assertion
    >>>         'GDK_IS_PIXBUF
    >>>         >     (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >  gdk_pixbuf_get_pixels_with_length: assertion
    >>>         'GDK_IS_PIXBUF
    >>>         >     (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_width: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >
    >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **:
    >>>         17:40:13.433:
    >>>         >     gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF
    >>>         (pixbuf)' failed
    >>>         >     189632
    >>>         >     ----------------
    >>>         >
    >>>         >
    >>>         >     terje@localhost:~> sudo mount
    >>>         >
/home/terje/Applications/CinGG-20221031-x86_64.AppImage
...
>>>         >     /home/terje/mountpoint/ -o offset=189632
    >>>         >     [sudo] passord for root:
    >>>         >
    >>>         >     terje@localhost:~> cd mountpoint
    >>>         >  terje@localhost:~/mountpoint> ls
    >>>         >     AppRun  cin.desktop cin.svg  usr
    >>>         >  terje@localhost:~/mountpoint> ls -la
    >>>         >     totalt 40
    >>>         >     drwxr-xr-x   3 root  root 102 okt.  31 15:24 .
    >>>         >     drwxr-xr-x 124 terje users 36864 nov.  12 17:31 ..
    >>>         >     lrwxrwxrwx   1 root root     11 okt.  31 15:24
    AppRun
    >>>         -> usr/bin/cin
    >>>         >     lrwxrwxrwx   1 root root     34 okt.  31 15:24
    >>>         cin.desktop ->
    >>>         >  usr/share/applications/cin.desktop
    >>>         >     lrwxrwxrwx   1 root root     45 okt.  31 15:24
    cin.svg ->
    >>>         >  usr/share/icons/hicolor/scalable/apps/cin.svg
    >>>         >     lrwxrwxrwx   1 root root      7 okt.  31 15:24
    >>>         .DirIcon -> cin.svg
    >>>         >     drwxr-xr-x   5 root root     62 okt.  31 15:23 usr
    >>>         >
    >>>         >  terje@localhost:~/mountpoint> find . -name bdwrite
    >>>         >     ./usr/bin/bdwrite
    >>>         >
    >>>         >  terje@localhost:~/mountpoint> stat ./usr/bin/bdwrite
    >>>         >       Fil: ./usr/bin/bdwrite
    >>>         >       Størrelse: 35940792 [tab]Blokker: 70197      IO
    >>>         Blokk: 1024
    >>>         >     vanlig fil
    >>>         >     Enhet: 700h/1792d Datanode: 12          Lenker: 1
    >>>         >     Tilgang: (0755/-rwxr-xr-x) Uid: (    0/    root)
    Gid:
    >>>         (    0/
    >>>         >     root)
    >>>         >     Tilgang: 2022-10-31 15:23:57.000000000 +0100
    >>>         >     Omgjøring: 2022-10-31 15:23:57.000000000 +0100
    >>>         >     Endring: 2022-10-31 15:23:57.000000000 +0100
    >>>         >      Fødsel: -
    >>>         >
    >>>         >  terje@localhost:~/mountpoint> which bdwrite
    >>>         >     which: no bdwrite in
    >>>  (/home/terje/bin:/usr/local/bin:/usr/bin:/bin)
    >>>         >
    >>>         >     Copied the mounted bdwrite to /usr/bin:
    >>>         >
    >>>         >  terje@localhost:~/mountpoint> sudo cp
    >>>         ./usr/bin/bdwrite /usr/bin
    >>>         >     [sudo] passord for root:
    >>>         >  terje@localhost:~/mountpoint> ls -la /usr/bin/bdwrite
    >>>         >     -rwxr-xr-x 1 root root 35940792 nov.  12 18:00
    >>>         /usr/bin/bdwrite
    >>>         >
    >>>         >     =============
    >>>         >
    >>>         >     3)
    >>>         >     Tried the extracted bdwrite with a hdv-file
    transcoded
    >>>         to Blu-ray
    >>>         >     pcm_bluray audio and mts stream
    >>>         >
    >>>         >     localhost:~ # cd /home/terje/Videoklipp
    >>>         >  localhost:/home/terje/Videoklipp # ls -1 *.mts
    >>>         >     2008_m2t-ac3.mts
    >>>         >     2008_m2t_pcm_bluray.mts
    >>>         >     hdv01_05_m2t_pcm_bluray.mts
    >>>         >     hdv01_m2t_pcm_bluray.mts
    >>>         >     hdv_iLink_m2t_pcm_bluray.mts
    >>>         >
    >>>         >
    >>>         >  localhost:/home/terje/Videoklipp # ffprobe
-hide_banner
...
>>>         >     2008_m2t_pcm_bluray.mts
    >>>         >     Input #0, mpegts, from '2008_m2t_pcm_bluray.mts':
    >>>         >       Duration: 00:00:13.44, start: 1.440000, bitrate:
    >>>         27988 kb/s
    >>>         >       Program 1
    >>>         >         Metadata:
    >>>         >           service_name    : Service01
    >>>         >           service_provider: FFmpeg
    >>>         >       Stream #0:0[0x1011]: Video: mpeg2video (Main)
    >>>         ([2][0][0][0] /
    >>>         >     0x0002), yuv420p(tv, bt709, top first),
    1440x1080 [SAR
    >>>         4:3 DAR
    >>>         >     16:9], 25000 kb/s, 25 fps, 25 tbr, 90k tbn
    >>>         >         Side data:
    >>>         >           cpb: bitrate max/min/avg: 25000000/0/0 buffer
    >>>         size: 7340032
    >>>         >     vbv_delay: N/A
    >>>         >       Stream #0:1[0x1100]: Audio: pcm_bluray
    ([128][0][0][0] /
    >>>         >     0x0080), 48000 Hz, stereo, s16, 1536 kb/s
    >>>         >  localhost:/home/terje/Videoklipp # du -sb *.mts
    >>>         >     43333624 2008_m2t-ac3.mts
    >>>         >     47020032 2008_m2t_pcm_bluray.mts
    >>>         >     1603362816 hdv01_05_m2t_pcm_bluray.mts
    >>>         >     2299017216 hdv01_m2t_pcm_bluray.mts
    >>>         >     399237120 hdv_iLink_m2t_pcm_bluray.mts
    >>>         >
    >>>         >
    >>>         >  localhost:/home/terje/Videoklipp # ls -la
    >>>         2008_m2t_pcm_bluray.mts
    >>>         >     -rw-r--r-- 1 terje users 47020032 Nov 11 22:06
    >>>         2008_m2t_pcm_bluray.mts
    >>>         >
    >>>         >
    >>>         >  localhost:/home/terje/Videoklipp # mkudffs -b 2048
    >>>         >     /tmp/newfilename.udfs 27055
    >>>         >  filename=/tmp/newfilename.udfs
    >>>         >     label=LinuxUDF
    >>>         >     uuid=636fdd9d0eee73bf
    >>>         >     blocksize=2048
    >>>         >     blocks=27055
    >>>         >     udfrev=201
    >>>         >     start=0, blocks=16, type=RESERVED
    >>>         >     start=16, blocks=3, type=VRS
    >>>         >     start=19, blocks=237, type=USPACE
    >>>         >     start=256, blocks=1, type=ANCHOR
    >>>         >     start=257, blocks=16, type=PVDS
    >>>         >     start=273, blocks=1, type=LVID
    >>>         >     start=274, blocks=26524, type=PSPACE
    >>>         >     start=26798, blocks=1, type=ANCHOR
    >>>         >     start=26799, blocks=239, type=USPACE
    >>>         >     start=27038, blocks=16, type=RVDS
    >>>         >     start=27054, blocks=1, type=ANCHOR
    >>>         >
    >>>         >
    >>>         >  localhost:/home/terje/Videoklipp # mount -o loop
    >>>         >     /tmp/newfilename.udfs /mnt/test
    >>>         >
    >>>         >  localhost:/home/terje/Videoklipp # bdwrite /mnt/test
    >>>         >     2008_m2t_pcm_bluray.mts
    >>>         >
    >>>         >     but got an error message:
    >>>         >
    >>>         >     bdwrite: error while loading shared libraries:
    >>>         >     libIlmImf-2_3.so.24: cannot open shared object
file:
...
>>>         No such file
    >>>         >     or directory
    >>>         >
    >>>         >
    >>>
    >>
    >