patches for djbfft - potentially fix another packaging error on Debian 13
Apparently Debain 13's packaging is more strict, so some warnings turned into errors. I tried to adapt patch from Gentoo bugtracker, but not tested it beyond compilation with gcc 11.2.0 I guess test for this will be playing ac3 audio with cingg's native decoder (not ffmpeg)
On Mon, Dec 8, 2025 at 8:38 PM Andrew Randrianasulu <[email protected]> wrote:
Apparently Debain 13's packaging is more strict, so some warnings turned into errors.
I tried to adapt patch from Gentoo bugtracker, but not tested it beyond compilation with gcc 11.2.0
There was need for another set of patches for same lib. Now cingg _package_ creation continues You may want to pull debian dir from blds directory, fix control file so it does not ref to linux-firmware and uses new date, not 2020 and run dpkg-buildpackage -us -uc -ui -i -b from where our ./autogen.sh is located. This way it catches more errors
I guess test for this will be playing ac3 audio with cingg's native decoder (not ffmpeg)
Finally, the package for Debian 13 can be built using Andrew’s patches. However, building with OpenCV plugins requires the same patched archive used for Fedora. Phyllis, could you please upload the patched archive for newer GCC-based distributions? Below are the instructions from another thread on how to build it: From: Andrew Randrianasulu <[email protected]>
Date: Tue, Dec 5, 2023 at 1:16 PM Subject: our opencv archive errors out on gcc 13 distros To: Cinelerra.GG <[email protected]>, Phyllis Smith <[email protected]>
so, I tried to fix it in brutal way
download and unpack opencv 4.8.1 from their sf page. 98 mb or so cd into it cd opencv-opencv-7d2cb72/ mkdir build cd build cmake .. try make, it will take some time. but even if build fails we mostly interested in .cache directory. ../../../opencv-opencv-7d2cb72/.cache/ade/fa4b3e25167319cb0f a9432ef8281945-v0.1.2a.zip copy that in our unpacked archive instead of 0.1.1f download our archive from https://cinelerra-gg.org/download/opencv/opencv-20200306.tgz unpack it into DIFFERENT directory. change this file AND also search for cmake downloader and replace it with one updated from same 4.8.1 distribution modules/gapi/cmake/DownloadADE.cmake now from rootof directory where two dirs from our archive {now updated} exist you can call tar -cvzf ../opencv-20200306-f.tgz . and put this new archive into thirdparty and call configure with new file name.
Or you could just upload the archive I use for building both the Fedora and Debian packages https://spitsyn.su/nextcloud/index.php/s/Rjy4NRFmff2xZLw Best regards, Andrey вт, 9 дек. 2025 г. в 17:18, Andrew Randrianasulu <[email protected]>:
On Mon, Dec 8, 2025 at 8:38 PM Andrew Randrianasulu <[email protected]> wrote:
Apparently Debain 13's packaging is more strict, so some warnings turned into errors.
I tried to adapt patch from Gentoo bugtracker, but not tested it beyond compilation with gcc 11.2.0
There was need for another set of patches for same lib. Now cingg _package_ creation continues
You may want to pull debian dir from blds directory, fix control file so it does not ref to linux-firmware and uses new date, not 2020 and run
dpkg-buildpackage -us -uc -ui -i -b
from where our ./autogen.sh is located.
This way it catches more errors
I guess test for this will be playing ac3 audio with cingg's native decoder (not ffmpeg)
Andrey/Andrew: I uploaded the opencv-20200306.tgz file (renaming without the -f) and renamed the previous one with addition of -previous. Thank you both. On Tue, Dec 9, 2025 at 9:39 AM Андрей Спицын <[email protected]> wrote:
Finally, the package for Debian 13 can be built using Andrew’s patches. However, building with OpenCV plugins requires the same patched archive used for Fedora. Phyllis, could you please upload the patched archive for newer GCC-based distributions? Below are the instructions from another thread on how to build it:
From: Andrew Randrianasulu <[email protected]>
Date: Tue, Dec 5, 2023 at 1:16 PM Subject: our opencv archive errors out on gcc 13 distros To: Cinelerra.GG <[email protected]>, Phyllis Smith <[email protected]>
so, I tried to fix it in brutal way
download and unpack opencv 4.8.1 from their sf page. 98 mb or so cd into it cd opencv-opencv-7d2cb72/ mkdir build cd build cmake .. try make, it will take some time. but even if build fails we mostly interested in .cache directory. ../../../opencv-opencv-7d2cb72/.cache/ade/fa4b3e25167319cb0f a9432ef8281945-v0.1.2a.zip copy that in our unpacked archive instead of 0.1.1f download our archive from https://cinelerra-gg.org/download/opencv/opencv-20200306.tgz unpack it into DIFFERENT directory. change this file AND also search for cmake downloader and replace it with one updated from same 4.8.1 distribution modules/gapi/cmake/DownloadADE.cmake now from rootof directory where two dirs from our archive {now updated} exist you can call tar -cvzf ../opencv-20200306-f.tgz . and put this new archive into thirdparty and call configure with new file name.
Or you could just upload the archive I use for building both the Fedora and Debian packages https://spitsyn.su/nextcloud/index.php/s/Rjy4NRFmff2xZLw
Best regards, Andrey
вт, 9 дек. 2025 г. в 17:18, Andrew Randrianasulu <[email protected]
:
On Mon, Dec 8, 2025 at 8:38 PM Andrew Randrianasulu <[email protected]> wrote:
Apparently Debain 13's packaging is more strict, so some warnings turned into errors.
I tried to adapt patch from Gentoo bugtracker, but not tested it beyond compilation with gcc 11.2.0
There was need for another set of patches for same lib. Now cingg _package_ creation continues
You may want to pull debian dir from blds directory, fix control file so it does not ref to linux-firmware and uses new date, not 2020 and run
dpkg-buildpackage -us -uc -ui -i -b
from where our ./autogen.sh is located.
This way it catches more errors
I guess test for this will be playing ac3 audio with cingg's native decoder (not ffmpeg)
The following modification/patches for Debian version 13 have been checked into GIT based on Andrew's mods and initial testing and subsequent successful testing by Andrey. (Also tested to verify no obvious impact to non-Debian13 builds.) I think I got them all to include updating the opencv...tgz file on the download website. 0003-Hopefully-fix-multilib-x265-build-for-Debian-13-pack.patch 0001-Add-files-for-djbfft-0.7.6-from-gentoo.patch 0002-More-patch-pieces-for-djbfft.patch 0001-Remove-linux-firmware-from-debian-control-file-does-.patch 0001-Update-README-with-Debian-package-build-instructions.patch Files modified: - cinelerra-5.1/blds/debian/control - cinelerra-5.1/ README - cinelerra-5.1/thirdparty/src/ x265_4.0.patch2 -3 New files created: - cinelerra-5.1/thirdparty/src/jbfft-0.76.patch2 - 7 This was MAJOR WORK thanks to Andrew and Andrey. On Tue, Dec 9, 2025 at 9:39 AM Андрей Спицын <[email protected]> wrote:
Finally, the package for Debian 13 can be built using Andrew’s patches. However, building with OpenCV plugins requires the same patched archive used for Fedora. Phyllis, could you please upload the patched archive for newer GCC-based distributions? Below are the instructions from another thread on how to build it:
From: Andrew Randrianasulu <[email protected]>
Date: Tue, Dec 5, 2023 at 1:16 PM Subject: our opencv archive errors out on gcc 13 distros To: Cinelerra.GG <[email protected]>, Phyllis Smith <[email protected]>
so, I tried to fix it in brutal way
download and unpack opencv 4.8.1 from their sf page. 98 mb or so cd into it cd opencv-opencv-7d2cb72/ mkdir build cd build cmake .. try make, it will take some time. but even if build fails we mostly interested in .cache directory. ../../../opencv-opencv-7d2cb72/.cache/ade/fa4b3e25167319cb0f a9432ef8281945-v0.1.2a.zip copy that in our unpacked archive instead of 0.1.1f download our archive from https://cinelerra-gg.org/download/opencv/opencv-20200306.tgz unpack it into DIFFERENT directory. change this file AND also search for cmake downloader and replace it with one updated from same 4.8.1 distribution modules/gapi/cmake/DownloadADE.cmake now from rootof directory where two dirs from our archive {now updated} exist you can call tar -cvzf ../opencv-20200306-f.tgz . and put this new archive into thirdparty and call configure with new file name.
Or you could just upload the archive I use for building both the Fedora and Debian packages https://spitsyn.su/nextcloud/index.php/s/Rjy4NRFmff2xZLw
Best regards, Andrey
вт, 9 дек. 2025 г. в 17:18, Andrew Randrianasulu <[email protected]
:
On Mon, Dec 8, 2025 at 8:38 PM Andrew Randrianasulu <[email protected]> wrote:
Apparently Debain 13's packaging is more strict, so some warnings turned into errors.
I tried to adapt patch from Gentoo bugtracker, but not tested it beyond compilation with gcc 11.2.0
There was need for another set of patches for same lib. Now cingg _package_ creation continues
You may want to pull debian dir from blds directory, fix control file so it does not ref to linux-firmware and uses new date, not 2020 and run
dpkg-buildpackage -us -uc -ui -i -b
from where our ./autogen.sh is located.
This way it catches more errors
I guess test for this will be playing ac3 audio with cingg's native decoder (not ffmpeg)
participants (3)
-
Andrew Randrianasulu -
Phyllis Smith -
Андрей Спицын