Analog S-Video to Digital HDMI converter + ms2130 UHD HDMI-USB3 Capture card
I contine this new thread with an short extract from the long growing [Cin] ms2130 HDMI-USB3 UHD capture card - not quite as expected? But shouldn't a 422 and not a 420 output format be created? >> it seems in some cases ffmpeg not geared towards preserving most information, just picks up most commonly defined/first pixel format. >> Try mpeg2video as output codec, and/or specify pixel format (pix_fmt) more explicitly before output's filename? >>> Could you possibly examplify the latter? >>>> I think I just theorized ffmpeg may try to get some info from alsa device file directly, as it tries with /dev/video. But I never >>>> tried this way, so I can be totally wrong! ------------------------------- Instead of 50i (pal interlaced fields), I try 50 fps (progressive) that at least is a pal frequence. And yes, it seems from the output that ffmpeg uses mpeg1video as default output codec. Furter I try to combine the current line ffmpeg -hide_banner -f v4l2 -input_format yuyv422 -video_size 720x576 -framerate 25 -t 20 -i /dev/video2 out-720x576_ms2130.mpeg with and utilize the syntax developed 2021 for "Blu-ray compliant MPEG-2 SD video with LPCM audio" ffmpeg -i dv28.dv -c:v mpeg2video -refs 1 -bf 2 -b:v 25M -maxrate 25M -minrate 25M -bufsize 45M -muxrate 45M -dc 10 -c:a pcm_s16be -f vob dv28.mpg and for the current ongoing "DVD compliant MPEG-2 Video and PCM Audio" ffmpeg -hide_banner -i dv01.dv -c:v mpeg2video -refs 1 -bf 2 -b:v 8M -maxrate 8M -minrate 8M -bufsize 20M -muxrate 11M -dc 10 -c:a pcm_dvd -f vob -flags +ilme+ildct dv01.mpg to first ffmpeg -hide_banner -f v4l2 -input_format yuyv422 -video_size 720x576 -framerate 50 -c:v mpeg2video -refs 1 -bf 2 -b:v 8M -maxrate 8M -minrate 8M -bufsize 20M -muxrate 11M -dc 10 -c:a pcm_dvd -f vob -t 20 -i /dev/video2 720x576_50p_ms2130.mpg Option b:v (video bitrate (please use -b:v)) cannot be applied to input url /dev/video2 -- you are trying to apply an input option to an output file or vice versa. Move this option before the file it belongs to. Error parsing options for input file /dev/video2. Error opening input files: Invalid argument and next revised with no output. That is I need help to debug the syntax error: ffmpeg -hide_banner -f v4l2 -input_format yuyv422 -video_size 720x576 -framerate 50 -i /dev/video2 -c:v mpeg2video -refs 1 -bf 2 -b:v 8M -maxrate 8M -minrate 8M -bufsize 20M -muxrate 11M -dc 10 -c:a pcm_dvd -f vob -t 20 720x576_50p_ms2130.mpg [video4linux2,v4l2 @ 0x55db770ef9c0] Dequeued v4l2 buffer contains corrupted data (0 bytes). Input #0, video4linux2,v4l2, from '/dev/video2': Duration: N/A, start: 0.000000, bitrate: 331776 kb/s Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 720x576, 331776 kb/s, 50 fps, 50 tbr, 1000k tbn Stream mapping: Stream #0:0 -> #0:0 (rawvideo (native) -> mpeg2video (native)) Press [q] to stop, [?] for help [video4linux2,v4l2 @ 0x55db770ef9c0] Dequeued v4l2 buffer contains corrupted data (0 bytes). Last message repeated 30 times [mpeg2video @ 0x55db77114f00] Warning vbv_delay will be set to 0xFFFF (=VBR) as the specified vbv buffer is too large for the given bitrate! Output #0, vob, to '720x576_50p_ms2130.mpg': Metadata: encoder : Lavf59.27.100 Stream #0:0: Video: mpeg2video (4:2:2), yuv422p(tv, progressive), 720x576, q=2-31, 8000 kb/s, 50 fps, 90k tbn Metadata: encoder : Lavc59.37.100 mpeg2video Side data: cpb: bitrate max/min/avg: 8000000/8000000/8000000 buffer size: 20000000 vbv_delay: N/A frame= 0 fps=0.0 q=0.0 Lsize= 0kB time=00:00:00.00 bitrate=N/A speed= 0x video:0kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown Output file is empty, nothing was encoded (check -ss / -t / -frames parameters if used)
пт, 10 мар. 2023 г., 02:43 Terje J. Hanssen <[email protected]>:
I contine this new thread with an short extract from the long growing [Cin] ms2130 HDMI-USB3 UHD capture card - not quite as expected?
But shouldn't a 422 and not a 420 output format be created?
it seems in some cases ffmpeg not geared towards preserving most information, just picks up most commonly defined/first pixel format. Try mpeg2video as output codec, and/or specify pixel format (pix_fmt) more explicitly before output's filename?
Could you possibly examplify the latter?
I think I just theorized ffmpeg may try to get some info from alsa device file directly, as it tries with /dev/video. But I never >>>> tried this way, so I can be totally wrong!
-------------------------------
Instead of 50i (pal interlaced fields), I try 50 fps (progressive) that at least is a pal frequence.
And yes, it seems from the output that ffmpeg uses mpeg1video as default output codec.
Furter I try to combine the current line
ffmpeg -hide_banner -f v4l2 -input_format yuyv422 -video_size 720x576 -framerate 25 -t 20 -i /dev/video2 out-720x576_ms2130.mpeg
with and utilize the syntax developed 2021 for "Blu-ray compliant MPEG-2 SD video with LPCM audio"
ffmpeg -i dv28.dv -c:v mpeg2video -refs 1 -bf 2 -b:v 25M -maxrate 25M -minrate 25M -bufsize 45M -muxrate 45M -dc 10 -c:a pcm_s16be -f vob dv28.mpg
and for the current ongoing "DVD compliant MPEG-2 Video and PCM Audio"
ffmpeg -hide_banner -i dv01.dv -c:v mpeg2video -refs 1 -bf 2 -b:v 8M -maxrate 8M -minrate 8M -bufsize 20M -muxrate 11M -dc 10 -c:a pcm_dvd -f vob -flags +ilme+ildct dv01.mpg
to first
ffmpeg -hide_banner -f v4l2 -input_format yuyv422 -video_size 720x576 -framerate 50 -c:v mpeg2video -refs 1 -bf 2 -b:v 8M -maxrate 8M -minrate 8M -bufsize 20M -muxrate 11M -dc 10 -c:a pcm_dvd -f vob -t 20 -i /dev/video2 720x576_50p_ms2130.mpg Option b:v (video bitrate (please use -b:v)) cannot be applied to input url /dev/video2 -- you are trying to apply an input option to an output file or vice versa. Move this option before the file it belongs to. Error parsing options for input file /dev/video2. Error opening input files: Invalid argument
and next revised with no output. That is I need help to debug the syntax error:
ffmpeg -hide_banner -f v4l2 -input_format yuyv422 -video_size 720x576 -framerate 50 -i /dev/video2 -c:v mpeg2video -refs 1 -bf 2 -b:v 8M -maxrate 8M -minrate 8M -bufsize 20M -muxrate 11M -dc 10 -c:a pcm_dvd -f vob -t 20 720x576_50p_ms2130.mpg [video4linux2,v4l2 @ 0x55db770ef9c0] Dequeued v4l2 buffer contains corrupted data (0 bytes). Input #0, video4linux2,v4l2, from '/dev/video2': Duration: N/A, start: 0.000000, bitrate: 331776 kb/s Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 720x576, 331776 kb/s, 50 fps, 50 tbr, 1000k tbn Stream mapping: Stream #0:0 -> #0:0 (rawvideo (native) -> mpeg2video (native)) Press [q] to stop, [?] for help [video4linux2,v4l2 @ 0x55db770ef9c0] Dequeued v4l2 buffer contains corrupted data (0 bytes). Last message repeated 30 times [mpeg2video @ 0x55db77114f00] Warning vbv_delay will be set to 0xFFFF (=VBR) as the specified vbv buffer is too large for the given bitrate! Output #0, vob, to '720x576_50p_ms2130.mpg': Metadata: encoder : Lavf59.27.100 Stream #0:0: Video: mpeg2video (4:2:2), yuv422p(tv, progressive), 720x576, q=2-31, 8000 kb/s, 50 fps, 90k tbn Metadata: encoder : Lavc59.37.100 mpeg2video Side data: cpb: bitrate max/min/avg: 8000000/8000000/8000000 buffer size: 20000000 vbv_delay: N/A frame= 0 fps=0.0 q=0.0 Lsize= 0kB time=00:00:00.00 bitrate=N/A speed= 0x video:0kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown Output file is empty, nothing was encoded (check -ss / -t / -frames parameters if used)
I am afraid you probably need help from ffmpeg-users mail list here .... Last line looks correct, yet not encoding??
Den 10.03.2023 02:46, skrev Andrew Randrianasulu:
пт, 10 мар. 2023 г., 02:43 Terje J. Hanssen <[email protected]>:
I contine this new thread with an short extract from the long growing [Cin] ms2130 HDMI-USB3 UHD capture card - not quite as expected?
But shouldn't a 422 and not a 420 output format be created?
>> it seems in some cases ffmpeg not geared towards preserving most information, just picks up most commonly defined/first pixel format. >> Try mpeg2video as output codec, and/or specify pixel format (pix_fmt) more explicitly before output's filename?
>>> Could you possibly examplify the latter?
>>>> I think I just theorized ffmpeg may try to get some info from alsa device file directly, as it tries with /dev/video. But I never >>>> tried this way, so I can be totally wrong!
-------------------------------
Instead of 50i (pal interlaced fields), I try 50 fps (progressive) that at least is a pal frequence.
And yes, it seems from the output that ffmpeg uses mpeg1video as default output codec.
Furter I try to combine the current line
ffmpeg -hide_banner -f v4l2 -input_format yuyv422 -video_size 720x576 -framerate 25 -t 20 -i /dev/video2 out-720x576_ms2130.mpeg
with and utilize the syntax developed 2021 for "Blu-ray compliant MPEG-2 SD video with LPCM audio"
ffmpeg -i dv28.dv -c:v mpeg2video -refs 1 -bf 2 -b:v 25M -maxrate 25M -minrate 25M -bufsize 45M -muxrate 45M -dc 10 -c:a pcm_s16be -f vob dv28.mpg
and for the current ongoing "DVD compliant MPEG-2 Video and PCM Audio"
ffmpeg -hide_banner -i dv01.dv -c:v mpeg2video -refs 1 -bf 2 -b:v 8M -maxrate 8M -minrate 8M -bufsize 20M -muxrate 11M -dc 10 -c:a pcm_dvd -f vob -flags +ilme+ildct dv01.mpg
to first
ffmpeg -hide_banner -f v4l2 -input_format yuyv422 -video_size 720x576 -framerate 50 -c:v mpeg2video -refs 1 -bf 2 -b:v 8M -maxrate 8M -minrate 8M -bufsize 20M -muxrate 11M -dc 10 -c:a pcm_dvd -f vob -t 20 -i /dev/video2 720x576_50p_ms2130.mpg Option b:v (video bitrate (please use -b:v)) cannot be applied to input url /dev/video2 -- you are trying to apply an input option to an output file or vice versa. Move this option before the file it belongs to. Error parsing options for input file /dev/video2. Error opening input files: Invalid argument
and next revised with no output. That is I need help to debug the syntax error:
ffmpeg -hide_banner -f v4l2 -input_format yuyv422 -video_size 720x576 -framerate 50 -i /dev/video2 -c:v mpeg2video -refs 1 -bf 2 -b:v 8M -maxrate 8M -minrate 8M -bufsize 20M -muxrate 11M -dc 10 -c:a pcm_dvd -f vob -t 20 720x576_50p_ms2130.mpg [video4linux2,v4l2 @ 0x55db770ef9c0] Dequeued v4l2 buffer contains corrupted data (0 bytes). Input #0, video4linux2,v4l2, from '/dev/video2': Duration: N/A, start: 0.000000, bitrate: 331776 kb/s Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 720x576, 331776 kb/s, 50 fps, 50 tbr, 1000k tbn Stream mapping: Stream #0:0 -> #0:0 (rawvideo (native) -> mpeg2video (native)) Press [q] to stop, [?] for help [video4linux2,v4l2 @ 0x55db770ef9c0] Dequeued v4l2 buffer contains corrupted data (0 bytes). Last message repeated 30 times [mpeg2video @ 0x55db77114f00] Warning vbv_delay will be set to 0xFFFF (=VBR) as the specified vbv buffer is too large for the given bitrate! Output #0, vob, to '720x576_50p_ms2130.mpg': Metadata: encoder : Lavf59.27.100 Stream #0:0: Video: mpeg2video (4:2:2), yuv422p(tv, progressive), 720x576, q=2-31, 8000 kb/s, 50 fps, 90k tbn Metadata: encoder : Lavc59.37.100 mpeg2video Side data: cpb: bitrate max/min/avg: 8000000/8000000/8000000 buffer size: 20000000 vbv_delay: N/A frame= 0 fps=0.0 q=0.0 Lsize= 0kB time=00:00:00.00 bitrate=N/A speed= 0x video:0kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown Output file is empty, nothing was encoded (check -ss / -t / -frames parameters if used)
I am afraid you probably need help from ffmpeg-users mail list here .... Last line looks correct, yet not encoding??
My fault. I didn't remember I had to reboot to Tumbleweed to get pcm_dvd encoder available. Then it run as above and created the output file: ffprobe -hide_banner 720x576_50p_ms2130.mpg Input #0, mpeg, from '720x576_50p_ms2130.mpg': Duration: 00:00:14.44, start: 0.520000, bitrate: 7749 kb/s Stream #0:0[0x1e0]: Video: mpeg2video (4:2:2), yuv422p(tv, progressive), 720x576 [SAR 1:1 DAR 5:4], 50 fps, 50 tbr, 90k tbn Side data: cpb: bitrate max/min/avg: 8000000/0/0 buffer size: 20004864 vbv_delay: N/A Color subsampling; I think we used -input_format "yuyv422" to correspond with the capture card YUY2 to grab as much quality as possible. However, DVD-Video does only support 4:2:0 chroma subsampling (not 4:2:2). I tried to add "-pix_fmt yuv420p" on the output side after -c:v mpeg2video but it didn't work.? Interlacing: DVDs are based on MPEG-2 encoding, which allows for either progressive or interlaced sequences. However, very few discs use progressive sequences, because the players are specifically designed for interlaced output. I tried to add the previous "-flags +ilme+ildct" but then again Empty output file?
participants (2)
-
Andrew Randrianasulu -
Terje J. Hanssen