Den 13.11.2022 00:07, skrev Andrew Randrianasulu:

сб, 12 нояб. 2022 г., 21:43 Terje J. Hanssen <[email protected]>:

Derived from another thread "HDV files at archive.org <http://archive.org>" I extract and continue this topic in a new thread here. And if this isn't documented yet, I suggest some with knowledge to setup a Readme and manual section for this.

already there

https://cinelerra-gg.org/download/CinelerraGG_Manual/Managing_AppImage.html#...

I think I didn't recognized this section equivalent to the appimage user-guide section.

try to just unpack appimage and then set

export LD_LIBRARY_PATH=$BCASTDIR:$LD_LIBRARY_PATH

where $BCASTDIR points at unpacked/mounted appimages's usr/lib

before running bdwrite

While waiting for my ordered BD-R/RE discs, I have tried again and attach the new terminal output with comments as follows: /home/terje/Applications/CinGG-20221031-x86_64.AppImage --appimage-offset (AppImageLauncher:16794): GdkPixbuf-CRITICAL **: 20:50:50.433: gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF (pixbuf)' failed 189632 sudo mount /home/terje/Applications/CinGG-20221031-x86_64.AppImage /home/terje/mountpoint/ -o offset=189632 [sudo] passord for root: find /home/terje/mountpoint -name lib /home/terje/mountpoint/usr/lib export LD_LIBRARY_PATH=/home/terje/mountpoint/usr/lib:$LD_LIBRARY_PATH ls -la 2008_m2t_pcm_bluray.mts -rw-r--r-- 1 terje users 47020032 Nov 11 22:06 2008_m2t_pcm_bluray.mts mkudffs -b 2048 /tmp/newfilename.udfs 27055 filename=/tmp/newfilename.udfs label=LinuxUDF uuid=637bd9b8ea861ad7 blocksize=2048 blocks=27055 udfrev=201 start=0, blocks=16, type=RESERVED start=16, blocks=3, type=VRS start=19, blocks=237, type=USPACE start=256, blocks=1, type=ANCHOR start=257, blocks=16, type=PVDS start=273, blocks=1, type=LVID start=274, blocks=26524, type=PSPACE start=26798, blocks=1, type=ANCHOR start=26799, blocks=239, type=USPACE start=27038, blocks=16, type=RVDS start=27054, blocks=1, type=ANCHOR mount -o loop /tmp/newfilename.udfs /mnt/test find /home/terje/mountpoint -name bdwrite /home/terje/mountpoint/usr/bin/bdwrite /home/terje/mountpoint/usr/bin/bdwrite /mnt/test 2008_m2t_pcm_bluray.mts No interlace error ! -------------------- ls /mnt/test BDMV  CERTIFICATE tree -h /mnt/test/BDMV /mnt/test/BDMV ├── [  40]  AUXDATA ├── [ 332]  BACKUP │   ├── [  40]  BDJO │   ├── [  92]  CLIPINF │   │   └── [ 480]  00000.clpi │   ├── [  40]  JAR │   ├── [ 110]  MovieObject.bdmv │   ├── [  92]  PLAYLIST │   │   └── [ 184]  00000.mpls │   └── [ 124]  index.bdmv ├── [  40]  BDJO ├── [  92]  CLIPINF │   └── [ 480]  00000.clpi ├── [  40]  JAR ├── [  40]  META ├── [ 110]  MovieObject.bdmv ├── [  92]  PLAYLIST │   └── [ 184]  00000.mpls ├── [  92]  STREAM │   └── [ 45M]  00000.m2ts └── [ 124]  index.bdmv 12 directories, 9 files --------------------------------------- Finally 9 files and [ 45M]  00000.m2ts I was able to open /mnt/test/BDMV with VLC and playback video and pcm_bluray video OK ------------------------------------------------------ but not with mplayer as follows: umount /mnt/test which mplayer /usr/bin/mplayer mplayer -vo null br://tmp/newfilename.udfs Creating config file: /root/.mplayer/config MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing br://tmp/newfilename.udfs. The hostname option must be an integer: tmp Struct bluray, field hostname parsing error: tmp disc.c:333: failed opening UDF image newfilename.udfs disc.c:437: error opening file BDMV/index.bdmv disc.c:437: error opening file BDMV/BACKUP/index.bdmv bluray.c:2646: nav_get_title_list(newfilename.udfs/) failed Couldn't open Blu-ray device: newfilename.udfs No stream found to handle url br://tmp/newfilename.udfs Exiting... (End of file)

Den 12.11.2022 16:36, skrev Andrew Randrianasulu: > > > сб, 12 нояб. 2022 г., 18:30 Terje J. Hanssen <[email protected]> <mailto:[email protected]>: >

>     "Finally home again", just to discover that I have not 'bdwrite' available on my workstations upgraded with the latest 31. Oct 2022 CinGG appimages. >     Therefore I wonder if CinGG Appimage not provide and make it possible to run bdwrite from command line (similar like no ffmpeg) without a single user build? > > > I think you can unpack/mount appimages . > > https://docs.appimage.org/user-guide/run-appimages.html#mount-an-appimage > > then you hopefully will find bdwrite inside .... > > or slightly down this question  documentation said you can extract content of appimage into directory. So, if bdwrite actually there you can run it from there or copy it to some place >

1) First attempt as Type 1 appimage:

terje@localhost:~> sudo mount /home/terje/Applications/CinGG-20221031-x86_64.AppImage /home/terje/mountpoint/

[sudo] passord for root: mount: /home/terje/mountpoint: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.

terje@localhost:~> umount /home/terje/mountpoint/ umount: /home/terje/mountpoint: not mounted.

2) Second attempt as Type 2 appimage:

terje@localhost:~> /home/terje/Applications/CinGG-20221031-x86_64.AppImage --appimage-offset

but why all these warnings and failed messages? ----------

/usr/bin/AppImageLauncher: /usr/lib64/libcurl.so.4: no version information available (required by /usr/bin/../lib/x86_64-linux-gnu/appimagelauncher/libappimageupdate.so) Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway.

** (AppImageLauncher:7534): WARNING **: 17:40:13.433: Pixbuf theme: Cannot load pixmap file /usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png: Feil under lasting av bilde «/usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png»: Fatal feil i PNG-bildefil: bad parameters to zlib

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_width: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

** (AppImageLauncher:7534): WARNING **: 17:40:13.433: Invalid borders specified for theme pixmap: /usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png, borders don't fit within the image

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_width: assertion 'GDK_IS_PIXBUF (pixbuf)' failed

(AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF (pixbuf)' failed 189632 ----------------

terje@localhost:~> sudo mount /home/terje/Applications/CinGG-20221031-x86_64.AppImage /home/terje/mountpoint/ -o offset=189632 [sudo] passord for root:

terje@localhost:~> cd mountpoint terje@localhost:~/mountpoint> ls AppRun  cin.desktop  cin.svg  usr terje@localhost:~/mountpoint> ls -la totalt 40 drwxr-xr-x   3 root  root    102 okt.  31 15:24 . drwxr-xr-x 124 terje users 36864 nov.  12 17:31 .. lrwxrwxrwx   1 root  root     11 okt.  31 15:24 AppRun -> usr/bin/cin lrwxrwxrwx   1 root  root     34 okt.  31 15:24 cin.desktop -> usr/share/applications/cin.desktop lrwxrwxrwx   1 root  root     45 okt.  31 15:24 cin.svg -> usr/share/icons/hicolor/scalable/apps/cin.svg lrwxrwxrwx   1 root  root      7 okt.  31 15:24 .DirIcon -> cin.svg drwxr-xr-x   5 root  root     62 okt.  31 15:23 usr

terje@localhost:~/mountpoint> find . -name bdwrite ./usr/bin/bdwrite

terje@localhost:~/mountpoint> stat ./usr/bin/bdwrite   Fil: ./usr/bin/bdwrite   Størrelse: 35940792  [tab]Blokker: 70197      IO Blokk: 1024   vanlig fil Enhet: 700h/1792d       Datanode: 12          Lenker: 1 Tilgang: (0755/-rwxr-xr-x)  Uid: (    0/    root) Gid: (    0/    root) Tilgang: 2022-10-31 15:23:57.000000000 +0100 Omgjøring: 2022-10-31 15:23:57.000000000 +0100 Endring: 2022-10-31 15:23:57.000000000 +0100  Fødsel: -

terje@localhost:~/mountpoint> which bdwrite which: no bdwrite in (/home/terje/bin:/usr/local/bin:/usr/bin:/bin)

Copied the mounted bdwrite to /usr/bin:

terje@localhost:~/mountpoint> sudo cp ./usr/bin/bdwrite /usr/bin [sudo] passord for root: terje@localhost:~/mountpoint> ls -la /usr/bin/bdwrite -rwxr-xr-x 1 root root 35940792 nov.  12 18:00 /usr/bin/bdwrite

=============

3) Tried the extracted bdwrite with a hdv-file transcoded to Blu-ray pcm_bluray audio and mts stream

localhost:~ # cd /home/terje/Videoklipp localhost:/home/terje/Videoklipp # ls -1 *.mts 2008_m2t-ac3.mts 2008_m2t_pcm_bluray.mts hdv01_05_m2t_pcm_bluray.mts hdv01_m2t_pcm_bluray.mts hdv_iLink_m2t_pcm_bluray.mts

localhost:/home/terje/Videoklipp # ffprobe -hide_banner 2008_m2t_pcm_bluray.mts Input #0, mpegts, from '2008_m2t_pcm_bluray.mts':   Duration: 00:00:13.44, start: 1.440000, bitrate: 27988 kb/s   Program 1     Metadata:       service_name    : Service01       service_provider: FFmpeg   Stream #0:0[0x1011]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, bt709, top first), 1440x1080 [SAR 4:3 DAR 16:9], 25000 kb/s, 25 fps, 25 tbr, 90k tbn     Side data:       cpb: bitrate max/min/avg: 25000000/0/0 buffer size: 7340032 vbv_delay: N/A   Stream #0:1[0x1100]: Audio: pcm_bluray ([128][0][0][0] / 0x0080), 48000 Hz, stereo, s16, 1536 kb/s localhost:/home/terje/Videoklipp # du -sb *.mts 43333624        2008_m2t-ac3.mts 47020032        2008_m2t_pcm_bluray.mts 1603362816      hdv01_05_m2t_pcm_bluray.mts 2299017216      hdv01_m2t_pcm_bluray.mts 399237120       hdv_iLink_m2t_pcm_bluray.mts

localhost:/home/terje/Videoklipp # ls -la 2008_m2t_pcm_bluray.mts -rw-r--r-- 1 terje users 47020032 Nov 11 22:06 2008_m2t_pcm_bluray.mts

localhost:/home/terje/Videoklipp # mkudffs -b 2048 /tmp/newfilename.udfs 27055 filename=/tmp/newfilename.udfs label=LinuxUDF uuid=636fdd9d0eee73bf blocksize=2048 blocks=27055 udfrev=201 start=0, blocks=16, type=RESERVED start=16, blocks=3, type=VRS start=19, blocks=237, type=USPACE start=256, blocks=1, type=ANCHOR start=257, blocks=16, type=PVDS start=273, blocks=1, type=LVID start=274, blocks=26524, type=PSPACE start=26798, blocks=1, type=ANCHOR start=26799, blocks=239, type=USPACE start=27038, blocks=16, type=RVDS start=27054, blocks=1, type=ANCHOR

localhost:/home/terje/Videoklipp # mount -o loop /tmp/newfilename.udfs /mnt/test

localhost:/home/terje/Videoklipp # bdwrite /mnt/test 2008_m2t_pcm_bluray.mts

but got an error message:

bdwrite: error while loading shared libraries: libIlmImf-2_3.so.24: cannot open shared object file: No such file or directory

Den 22.11.2022 16:30, skrev Andrew Randrianasulu:

вт, 22 нояб. 2022 г., 00:20 Terje J. Hanssen <[email protected]>:

Den 13.11.2022 00:07, skrev Andrew Randrianasulu: > > > сб, 12 нояб. 2022 г., 21:43 Terje J. Hanssen <[email protected]>: > >     Derived from another thread "HDV files at archive.org <http://archive.org> >     <http://archive.org>" I extract and continue this topic in a new >     thread here. >     And if this isn't documented yet, I suggest some with knowledge to >     setup a Readme and manual section for this. > > > > > already there > > https://cinelerra-gg.org/download/CinelerraGG_Manual/Managing_AppImage.html#... > I think I didn't recognized this section equivalent to the appimage user-guide section.

> > try to just unpack appimage and then set > > export LD_LIBRARY_PATH=$BCASTDIR:$LD_LIBRARY_PATH > > where $BCASTDIR points at unpacked/mounted appimages's usr/lib > > before running bdwrite >

While waiting for my ordered BD-R/RE discs, I have tried again and attach the new terminal output with comments as follows:

/home/terje/Applications/CinGG-20221031-x86_64.AppImage --appimage-offset (AppImageLauncher:16794): GdkPixbuf-CRITICAL **: 20:50:50.433: gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF (pixbuf)' failed 189632

sudo mount /home/terje/Applications/CinGG-20221031-x86_64.AppImage /home/terje/mountpoint/ -o offset=189632 [sudo] passord for root:

find /home/terje/mountpoint -name lib /home/terje/mountpoint/usr/lib

export LD_LIBRARY_PATH=/home/terje/mountpoint/usr/lib:$LD_LIBRARY_PATH

ls -la 2008_m2t_pcm_bluray.mts -rw-r--r-- 1 terje users 47020032 Nov 11 22:06 2008_m2t_pcm_bluray.mts

mkudffs -b 2048 /tmp/newfilename.udfs 27055 filename=/tmp/newfilename.udfs label=LinuxUDF uuid=637bd9b8ea861ad7 blocksize=2048 blocks=27055 udfrev=201 start=0, blocks=16, type=RESERVED start=16, blocks=3, type=VRS start=19, blocks=237, type=USPACE start=256, blocks=1, type=ANCHOR start=257, blocks=16, type=PVDS start=273, blocks=1, type=LVID start=274, blocks=26524, type=PSPACE start=26798, blocks=1, type=ANCHOR start=26799, blocks=239, type=USPACE start=27038, blocks=16, type=RVDS start=27054, blocks=1, type=ANCHOR

mount -o loop /tmp/newfilename.udfs /mnt/test

find /home/terje/mountpoint -name bdwrite /home/terje/mountpoint/usr/bin/bdwrite

/home/terje/mountpoint/usr/bin/bdwrite /mnt/test 2008_m2t_pcm_bluray.mts

No interlace error ! --------------------

ls /mnt/test BDMV  CERTIFICATE

tree -h /mnt/test/BDMV /mnt/test/BDMV ├── [  40]  AUXDATA ├── [ 332]  BACKUP │   ├── [  40]  BDJO │   ├── [  92]  CLIPINF │   │   └── [ 480]  00000.clpi │   ├── [  40]  JAR │   ├── [ 110]  MovieObject.bdmv │   ├── [  92]  PLAYLIST │   │   └── [ 184]  00000.mpls │   └── [ 124]  index.bdmv ├── [  40]  BDJO ├── [  92]  CLIPINF │   └── [ 480]  00000.clpi ├── [  40]  JAR ├── [  40]  META ├── [ 110]  MovieObject.bdmv ├── [  92]  PLAYLIST │   └── [ 184]  00000.mpls ├── [  92]  STREAM │   └── [ 45M]  00000.m2ts └── [ 124]  index.bdmv

12 directories, 9 files

---------------------------------------

Finally 9 files and [ 45M]  00000.m2ts

I was able to open /mnt/test/BDMV with VLC and playback video and pcm_bluray video OK

------------------------------------------------------ but not with mplayer as follows:

umount /mnt/test

which mplayer /usr/bin/mplayer

mplayer -vo null br://tmp/newfilename.udfs Creating config file: /root/.mplayer/config MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control.

Playing br://tmp/newfilename.udfs. The hostname option must be an integer: tmp Struct bluray, field hostname parsing error: tmp disc.c:333: failed opening UDF image newfilename.udfs disc.c:437: error opening file BDMV/index.bdmv disc.c:437: error opening file BDMV/BACKUP/index.bdmv bluray.c:2646: nav_get_title_list(newfilename.udfs/) failed Couldn't open Blu-ray device: newfilename.udfs No stream found to handle url br://tmp/newfilename.udfs

Exiting... (End of file)

mplayer works for me if I start it from /tmp (where test file is located)

I will try also that next. But thinking more about this topic that has several cumbersome and error-phrone manual steps. Appimage has even complicated these, not at least for occasionally users. Therefore I will throw in the following suggestion or RFE: Will it be possible or manageable to integrate and run the bundled 'bdwrite' to Bluray within the Cin-GG's run-time environment? I.e we now has File > BD render (and DVD render). What to add File > "BD Write" and get sub-window with options to select HDV/mpeg2 without re-encoding (compression loss) of video from HDD file, select re-encoding of the MP2 audio to AC3 or PCM for Blu-ray etc. After all, Blu-ray images on BD-R/RE discs and possible simpler DVD-R/RW discs for exchange, are more reliable and playable backups for video on tape or HDD.

> > > >     Den 12.11.2022 16:36, skrev Andrew Randrianasulu: >     > >     > >     > сб, 12 нояб. 2022 г., 18:30 Terje J. Hanssen >     <[email protected]> <mailto:[email protected]>: >     > > >     >     "Finally home again", just to discover that I have not >     'bdwrite' available on my workstations upgraded with the latest >     31. Oct 2022 CinGG appimages. >     >     Therefore I wonder if CinGG Appimage not provide and make it >     possible to run bdwrite from command line (similar like no ffmpeg) >     without a single user build? >     > >     > >     > I think you can unpack/mount appimages . >     > >     > > https://docs.appimage.org/user-guide/run-appimages.html#mount-an-appimage >     > >     > then you hopefully will find bdwrite inside .... >     > >     > or slightly down this question documentation said you can >     extract content of appimage into directory. So, if bdwrite >     actually there you can run it from there or copy it to some place >     > > > >     1) >     First attempt as Type 1 appimage: > >     terje@localhost:~> sudo mount >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >     /home/terje/mountpoint/ > >     [sudo] passord for root: >     mount: /home/terje/mountpoint: wrong fs type, bad option, bad >     superblock on /dev/loop0, missing codepage or helper program, or >     other error. > >     terje@localhost:~> umount /home/terje/mountpoint/ >     umount: /home/terje/mountpoint: not mounted. > > >     2) >     Second attempt as Type 2 appimage: > >     terje@localhost:~> >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >     --appimage-offset > >     but why all these warnings and failed messages? >     ---------- > >     /usr/bin/AppImageLauncher: /usr/lib64/libcurl.so.4: no version >     information available (required by >  /usr/bin/../lib/x86_64-linux-gnu/appimagelauncher/libappimageupdate.so) >     Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use >     QT_QPA_PLATFORM=wayland to run on Wayland anyway. > >     ** (AppImageLauncher:7534): WARNING **: 17:40:13.433: Pixbuf >     theme: Cannot load pixmap file >  /usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png: >     Feil under lasting av bilde >  «/usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png»: >     Fatal feil i PNG-bildefil: bad parameters to zlib > > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_width: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     ** (AppImageLauncher:7534): WARNING **: 17:40:13.433: Invalid >     borders specified for theme pixmap: >  /usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png, >     borders don't fit within the image > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_width: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF (pixbuf)' failed >     189632 >     ---------------- > > >     terje@localhost:~> sudo mount >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >     /home/terje/mountpoint/ -o offset=189632 >     [sudo] passord for root: > >     terje@localhost:~> cd mountpoint >     terje@localhost:~/mountpoint> ls >     AppRun  cin.desktop  cin.svg  usr >     terje@localhost:~/mountpoint> ls -la >     totalt 40 >     drwxr-xr-x   3 root  root    102 okt.  31 15:24 . >     drwxr-xr-x 124 terje users 36864 nov.  12 17:31 .. >     lrwxrwxrwx   1 root  root     11 okt.  31 15:24 AppRun -> usr/bin/cin >     lrwxrwxrwx   1 root  root     34 okt.  31 15:24 cin.desktop -> >     usr/share/applications/cin.desktop >     lrwxrwxrwx   1 root  root     45 okt.  31 15:24 cin.svg -> >     usr/share/icons/hicolor/scalable/apps/cin.svg >     lrwxrwxrwx   1 root  root      7 okt.  31 15:24 .DirIcon -> cin.svg >     drwxr-xr-x   5 root  root     62 okt.  31 15:23 usr > >     terje@localhost:~/mountpoint> find . -name bdwrite >     ./usr/bin/bdwrite > >     terje@localhost:~/mountpoint> stat ./usr/bin/bdwrite >       Fil: ./usr/bin/bdwrite >       Størrelse: 35940792  [tab]Blokker: 70197 IO Blokk: 1024 >     vanlig fil >     Enhet: 700h/1792d       Datanode: 12 Lenker: 1 >     Tilgang: (0755/-rwxr-xr-x)  Uid: (    0/    root) Gid: (    0/ >     root) >     Tilgang: 2022-10-31 15:23:57.000000000 +0100 >     Omgjøring: 2022-10-31 15:23:57.000000000 +0100 >     Endring: 2022-10-31 15:23:57.000000000 +0100 >      Fødsel: - > >     terje@localhost:~/mountpoint> which bdwrite >     which: no bdwrite in (/home/terje/bin:/usr/local/bin:/usr/bin:/bin) > >     Copied the mounted bdwrite to /usr/bin: > >     terje@localhost:~/mountpoint> sudo cp ./usr/bin/bdwrite /usr/bin >     [sudo] passord for root: >     terje@localhost:~/mountpoint> ls -la /usr/bin/bdwrite >     -rwxr-xr-x 1 root root 35940792 nov.  12 18:00 /usr/bin/bdwrite > >     ============= > >     3) >     Tried the extracted bdwrite with a hdv-file transcoded to Blu-ray >     pcm_bluray audio and mts stream > >     localhost:~ # cd /home/terje/Videoklipp >     localhost:/home/terje/Videoklipp # ls -1 *.mts >     2008_m2t-ac3.mts >     2008_m2t_pcm_bluray.mts >     hdv01_05_m2t_pcm_bluray.mts >     hdv01_m2t_pcm_bluray.mts >     hdv_iLink_m2t_pcm_bluray.mts > > >     localhost:/home/terje/Videoklipp # ffprobe -hide_banner >     2008_m2t_pcm_bluray.mts >     Input #0, mpegts, from '2008_m2t_pcm_bluray.mts': >       Duration: 00:00:13.44, start: 1.440000, bitrate: 27988 kb/s >       Program 1 >         Metadata: >           service_name    : Service01 >           service_provider: FFmpeg >       Stream #0:0[0x1011]: Video: mpeg2video (Main) ([2][0][0][0] / >     0x0002), yuv420p(tv, bt709, top first), 1440x1080 [SAR 4:3 DAR >     16:9], 25000 kb/s, 25 fps, 25 tbr, 90k tbn >         Side data: >           cpb: bitrate max/min/avg: 25000000/0/0 buffer size: 7340032 >     vbv_delay: N/A >       Stream #0:1[0x1100]: Audio: pcm_bluray ([128][0][0][0] / >     0x0080), 48000 Hz, stereo, s16, 1536 kb/s >     localhost:/home/terje/Videoklipp # du -sb *.mts >     43333624        2008_m2t-ac3.mts >     47020032        2008_m2t_pcm_bluray.mts >     1603362816      hdv01_05_m2t_pcm_bluray.mts >     2299017216      hdv01_m2t_pcm_bluray.mts >     399237120       hdv_iLink_m2t_pcm_bluray.mts > > >     localhost:/home/terje/Videoklipp # ls -la 2008_m2t_pcm_bluray.mts >     -rw-r--r-- 1 terje users 47020032 Nov 11 22:06 2008_m2t_pcm_bluray.mts > > >     localhost:/home/terje/Videoklipp # mkudffs -b 2048 >     /tmp/newfilename.udfs 27055 >     filename=/tmp/newfilename.udfs >     label=LinuxUDF >     uuid=636fdd9d0eee73bf >     blocksize=2048 >     blocks=27055 >     udfrev=201 >     start=0, blocks=16, type=RESERVED >     start=16, blocks=3, type=VRS >     start=19, blocks=237, type=USPACE >     start=256, blocks=1, type=ANCHOR >     start=257, blocks=16, type=PVDS >     start=273, blocks=1, type=LVID >     start=274, blocks=26524, type=PSPACE >     start=26798, blocks=1, type=ANCHOR >     start=26799, blocks=239, type=USPACE >     start=27038, blocks=16, type=RVDS >     start=27054, blocks=1, type=ANCHOR > > >     localhost:/home/terje/Videoklipp # mount -o loop >     /tmp/newfilename.udfs /mnt/test > >     localhost:/home/terje/Videoklipp # bdwrite /mnt/test >     2008_m2t_pcm_bluray.mts > >     but got an error message: > >     bdwrite: error while loading shared libraries: >     libIlmImf-2_3.so.24: cannot open shared object file: No such file >     or directory > >

Den 22.11.2022 18:21, skrev Andrew Randrianasulu:

вт, 22 нояб. 2022 г., 19:53 Terje J. Hanssen <[email protected]>:

Den 22.11.2022 16:30, skrev Andrew Randrianasulu:

...

вт, 22 нояб. 2022 г., 00:20 Terje J. Hanssen <[email protected]>:

Den 13.11.2022 00:07, skrev Andrew Randrianasulu: > > > сб, 12 нояб. 2022 г., 21:43 Terje J. Hanssen <[email protected]>: > >     Derived from another thread "HDV files at archive.org <http://archive.org> >     <http://archive.org>" I extract and continue this topic in a new >     thread here. >     And if this isn't documented yet, I suggest some with knowledge to >     setup a Readme and manual section for this. > > > > > already there > > https://cinelerra-gg.org/download/CinelerraGG_Manual/Managing_AppImage.html#... > I think I didn't recognized this section equivalent to the appimage user-guide section.

> > try to just unpack appimage and then set > > export LD_LIBRARY_PATH=$BCASTDIR:$LD_LIBRARY_PATH > > where $BCASTDIR points at unpacked/mounted appimages's usr/lib > > before running bdwrite >

While waiting for my ordered BD-R/RE discs, I have tried again and attach the new terminal output with comments as follows:

/home/terje/Applications/CinGG-20221031-x86_64.AppImage --appimage-offset (AppImageLauncher:16794): GdkPixbuf-CRITICAL **: 20:50:50.433: gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF (pixbuf)' failed 189632

sudo mount /home/terje/Applications/CinGG-20221031-x86_64.AppImage /home/terje/mountpoint/ -o offset=189632 [sudo] passord for root:

find /home/terje/mountpoint -name lib /home/terje/mountpoint/usr/lib

export LD_LIBRARY_PATH=/home/terje/mountpoint/usr/lib:$LD_LIBRARY_PATH

ls -la 2008_m2t_pcm_bluray.mts -rw-r--r-- 1 terje users 47020032 Nov 11 22:06 2008_m2t_pcm_bluray.mts

mkudffs -b 2048 /tmp/newfilename.udfs 27055 filename=/tmp/newfilename.udfs label=LinuxUDF uuid=637bd9b8ea861ad7 blocksize=2048 blocks=27055 udfrev=201 start=0, blocks=16, type=RESERVED start=16, blocks=3, type=VRS start=19, blocks=237, type=USPACE start=256, blocks=1, type=ANCHOR start=257, blocks=16, type=PVDS start=273, blocks=1, type=LVID start=274, blocks=26524, type=PSPACE start=26798, blocks=1, type=ANCHOR start=26799, blocks=239, type=USPACE start=27038, blocks=16, type=RVDS start=27054, blocks=1, type=ANCHOR

mount -o loop /tmp/newfilename.udfs /mnt/test

find /home/terje/mountpoint -name bdwrite /home/terje/mountpoint/usr/bin/bdwrite

/home/terje/mountpoint/usr/bin/bdwrite /mnt/test 2008_m2t_pcm_bluray.mts

No interlace error ! --------------------

ls /mnt/test BDMV  CERTIFICATE

tree -h /mnt/test/BDMV /mnt/test/BDMV ├── [  40]  AUXDATA ├── [ 332]  BACKUP │   ├── [  40]  BDJO │   ├── [  92]  CLIPINF │   │   └── [ 480]  00000.clpi │   ├── [  40]  JAR │   ├── [ 110]  MovieObject.bdmv │   ├── [  92]  PLAYLIST │   │   └── [ 184]  00000.mpls │   └── [ 124]  index.bdmv ├── [  40]  BDJO ├── [  92]  CLIPINF │   └── [ 480]  00000.clpi ├── [  40]  JAR ├── [  40]  META ├── [ 110]  MovieObject.bdmv ├── [  92]  PLAYLIST │   └── [ 184]  00000.mpls ├── [  92]  STREAM │   └── [ 45M]  00000.m2ts └── [ 124]  index.bdmv

12 directories, 9 files

---------------------------------------

Finally 9 files and [ 45M]  00000.m2ts

I was able to open /mnt/test/BDMV with VLC and playback video and pcm_bluray video OK

------------------------------------------------------ but not with mplayer as follows:

umount /mnt/test

which mplayer /usr/bin/mplayer

mplayer -vo null br://tmp/newfilename.udfs Creating config file: /root/.mplayer/config MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control.

Playing br://tmp/newfilename.udfs. The hostname option must be an integer: tmp Struct bluray, field hostname parsing error: tmp disc.c:333: failed opening UDF image newfilename.udfs disc.c:437: error opening file BDMV/index.bdmv disc.c:437: error opening file BDMV/BACKUP/index.bdmv bluray.c:2646: nav_get_title_list(newfilename.udfs/) failed Couldn't open Blu-ray device: newfilename.udfs No stream found to handle url br://tmp/newfilename.udfs

Exiting... (End of file)

mplayer works for me if I start it from /tmp (where test file is located)

I will try also that next.

But thinking more about this topic that has several cumbersome and error-phrone manual steps. Appimage has even complicated these, not at least for occasionally users. Therefore I will throw in the following suggestion or RFE:

Will it be possible or manageable to integrate and run the bundled 'bdwrite' to Bluray within the Cin-GG's run-time environment? I.e we now has File > BD render (and DVD render). What to add File > "BD Write" and get sub-window with options to select HDV/mpeg2 without re-encoding (compression loss) of video from HDD file, select re-encoding of the MP2 audio to AC3 or PCM for Blu-ray etc.

may be try to encapsulate manual steps into bash script and then run this script from shell commands system? (not sure how to handle sudo password entering .... xdialog conditional on X DISPLAY variable? ah someone suggested 'sudo -A' and custom script https://askubuntu.com/questions/314395/proper-way-to-let-user-enter-password... )

https://cinelerra-gg.org/download/CinelerraGG_Manual/Menu_Bar_Shell_Commands...

if we develop it into being even relatively distro-agnostic and error-proof it hopefully can be included into future versions of CinGG

making mpeg2 hdv compatible _encoding_ profile is also on table, I think ... (this one can be integrated at Blu-ray specific menu choice, because I put some lines of code in there for supporting pcm audio on h264 encoded BD)

I also found some remaints of direct-copy 'smart-render-like' feature in Cinelerra-CV's libquicktime:

https://github.com/cinelerra-cv-team/cinelerra-cv/blob/954a91e72bba1ed1ce641...

around line 730 but it was only working (apparently) with some mpeg4 _divx_ movs, not mpeg2s.

developing mpeg direct-copy routines remained big TODO item. I look at related code from time to time but no promises, sadly.

I just add my extracted notes and urls about Smart rendering HDV in Vegas, Premiere Pro: What is smart rendering? Smart Render *analyzes a video for any previously rendered sections and renders only the new or revised sections*. This can reduce rendering time significantly. Corel VideoStudio's SmartRender feature makes previewing and creating movies a lot faster. How To Enable Smart Render You can enable smart render with video editing software like VideoStudio. Follow along with our tutorial below to learn the easiest way to enable smart render. Rendering can take an enormous amount of time in video editing, especially when the video is long and includes a large number of effects. VideoStudio has implemented a smart render system to speed that process up and only render the parts of the film that need rendering. Read on to find out how it works. Smart Render analyzes a video for any previously rendered sections and renders only the new or revised sections. This can reduce rendering time significantly. Corel VideoStudio’s SmartRender feature makes previewing and creating movies a lot faster. When you preview your video project for the first time, VideoStudio ‘renders’ the project by creating a temporary preview file on your hard drive which combines the video, image, and audio clips with the special effects which you applied to them. The SmartRender feature detects any changes in your project and if there are no changes, instantly plays back the preview file. If there are changes (for instance, when titles, video filters or transition effects have been added), it renders out only the edited portions, making render times much shorter and faster. https://www.vegascreativesoftware.info/us/forum/hdv-smart-rendering-and-bada... https://www.dvinfo.net/forum/archive/index.php/t-116464.html https://helpx.adobe.com/premiere-pro/using/smart-rendering.html https://larryjordan.com/articles/premiere-pro-export-faster-with-smart-rende... https://workflow.frame.io/guide/smart-rendering https://blog.frame.io/2021/06/07/premiere-pro-max-render-quality-max-bit-dep... https://www.kevinmonahan.net/?p=88

After all, Blu-ray images on BD-R/RE discs and possible simpler DVD-R/RW discs for exchange, are more reliable and playable backups for video on tape or HDD.

...

> > > >     Den 12.11.2022 16:36, skrev Andrew Randrianasulu: >     > >     > >     > сб, 12 нояб. 2022 г., 18:30 Terje J. Hanssen >     <[email protected]> <mailto:[email protected]>: >     > > >     >     "Finally home again", just to discover that I have not >     'bdwrite' available on my workstations upgraded with the latest >     31. Oct 2022 CinGG appimages. >     >     Therefore I wonder if CinGG Appimage not provide and make it >     possible to run bdwrite from command line (similar like no ffmpeg) >     without a single user build? >     > >     > >     > I think you can unpack/mount appimages . >     > >     > > https://docs.appimage.org/user-guide/run-appimages.html#mount-an-appimage >     > >     > then you hopefully will find bdwrite inside .... >     > >     > or slightly down this question documentation said you can >     extract content of appimage into directory. So, if bdwrite >     actually there you can run it from there or copy it to some place >     > > > >     1) >     First attempt as Type 1 appimage: > >     terje@localhost:~> sudo mount >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >     /home/terje/mountpoint/ > >     [sudo] passord for root: >     mount: /home/terje/mountpoint: wrong fs type, bad option, bad >     superblock on /dev/loop0, missing codepage or helper program, or >     other error. > >     terje@localhost:~> umount /home/terje/mountpoint/ >     umount: /home/terje/mountpoint: not mounted. > > >     2) >     Second attempt as Type 2 appimage: > >     terje@localhost:~> >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >     --appimage-offset > >     but why all these warnings and failed messages? >     ---------- > >     /usr/bin/AppImageLauncher: /usr/lib64/libcurl.so.4: no version >     information available (required by >  /usr/bin/../lib/x86_64-linux-gnu/appimagelauncher/libappimageupdate.so) >     Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use >     QT_QPA_PLATFORM=wayland to run on Wayland anyway. > >     ** (AppImageLauncher:7534): WARNING **: 17:40:13.433: Pixbuf >     theme: Cannot load pixmap file >  /usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png: >     Feil under lasting av bilde >  «/usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png»: >     Fatal feil i PNG-bildefil: bad parameters to zlib > > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_width: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     ** (AppImageLauncher:7534): WARNING **: 17:40:13.433: Invalid >     borders specified for theme pixmap: >  /usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png, >     borders don't fit within the image > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_width: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF (pixbuf)' failed >     189632 >     ---------------- > > >     terje@localhost:~> sudo mount >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >     /home/terje/mountpoint/ -o offset=189632 >     [sudo] passord for root: > >     terje@localhost:~> cd mountpoint >     terje@localhost:~/mountpoint> ls >     AppRun  cin.desktop  cin.svg  usr >     terje@localhost:~/mountpoint> ls -la >     totalt 40 >     drwxr-xr-x   3 root  root    102 okt.  31 15:24 . >     drwxr-xr-x 124 terje users 36864 nov.  12 17:31 .. >     lrwxrwxrwx   1 root  root     11 okt.  31 15:24 AppRun -> usr/bin/cin >     lrwxrwxrwx   1 root  root     34 okt.  31 15:24 cin.desktop -> >     usr/share/applications/cin.desktop >     lrwxrwxrwx   1 root  root     45 okt.  31 15:24 cin.svg -> >  usr/share/icons/hicolor/scalable/apps/cin.svg >     lrwxrwxrwx   1 root  root      7 okt.  31 15:24 .DirIcon -> cin.svg >     drwxr-xr-x   5 root  root     62 okt.  31 15:23 usr > >     terje@localhost:~/mountpoint> find . -name bdwrite >     ./usr/bin/bdwrite > >     terje@localhost:~/mountpoint> stat ./usr/bin/bdwrite >       Fil: ./usr/bin/bdwrite >       Størrelse: 35940792  [tab]Blokker: 70197      IO Blokk: 1024 >     vanlig fil >     Enhet: 700h/1792d       Datanode: 12          Lenker: 1 >     Tilgang: (0755/-rwxr-xr-x)  Uid: ( 0/    root) Gid: (    0/ >     root) >     Tilgang: 2022-10-31 15:23:57.000000000 +0100 >     Omgjøring: 2022-10-31 15:23:57.000000000 +0100 >     Endring: 2022-10-31 15:23:57.000000000 +0100 >      Fødsel: - > >     terje@localhost:~/mountpoint> which bdwrite >     which: no bdwrite in (/home/terje/bin:/usr/local/bin:/usr/bin:/bin) > >     Copied the mounted bdwrite to /usr/bin: > >     terje@localhost:~/mountpoint> sudo cp ./usr/bin/bdwrite /usr/bin >     [sudo] passord for root: >     terje@localhost:~/mountpoint> ls -la /usr/bin/bdwrite >     -rwxr-xr-x 1 root root 35940792 nov. 12 18:00 /usr/bin/bdwrite > >     ============= > >     3) >     Tried the extracted bdwrite with a hdv-file transcoded to Blu-ray >     pcm_bluray audio and mts stream > >     localhost:~ # cd /home/terje/Videoklipp >     localhost:/home/terje/Videoklipp # ls -1 *.mts >     2008_m2t-ac3.mts >     2008_m2t_pcm_bluray.mts >     hdv01_05_m2t_pcm_bluray.mts >     hdv01_m2t_pcm_bluray.mts >     hdv_iLink_m2t_pcm_bluray.mts > > >     localhost:/home/terje/Videoklipp # ffprobe -hide_banner >     2008_m2t_pcm_bluray.mts >     Input #0, mpegts, from '2008_m2t_pcm_bluray.mts': >       Duration: 00:00:13.44, start: 1.440000, bitrate: 27988 kb/s >       Program 1 >         Metadata: >           service_name    : Service01 >           service_provider: FFmpeg >       Stream #0:0[0x1011]: Video: mpeg2video (Main) ([2][0][0][0] / >     0x0002), yuv420p(tv, bt709, top first), 1440x1080 [SAR 4:3 DAR >     16:9], 25000 kb/s, 25 fps, 25 tbr, 90k tbn >         Side data: >           cpb: bitrate max/min/avg: 25000000/0/0 buffer size: 7340032 >     vbv_delay: N/A >       Stream #0:1[0x1100]: Audio: pcm_bluray ([128][0][0][0] / >     0x0080), 48000 Hz, stereo, s16, 1536 kb/s >     localhost:/home/terje/Videoklipp # du -sb *.mts >     43333624        2008_m2t-ac3.mts >     47020032 2008_m2t_pcm_bluray.mts >     1603362816 hdv01_05_m2t_pcm_bluray.mts >     2299017216 hdv01_m2t_pcm_bluray.mts >     399237120 hdv_iLink_m2t_pcm_bluray.mts > > >     localhost:/home/terje/Videoklipp # ls -la 2008_m2t_pcm_bluray.mts >     -rw-r--r-- 1 terje users 47020032 Nov 11 22:06 2008_m2t_pcm_bluray.mts > > >     localhost:/home/terje/Videoklipp # mkudffs -b 2048 >     /tmp/newfilename.udfs 27055 >     filename=/tmp/newfilename.udfs >     label=LinuxUDF >     uuid=636fdd9d0eee73bf >     blocksize=2048 >     blocks=27055 >     udfrev=201 >     start=0, blocks=16, type=RESERVED >     start=16, blocks=3, type=VRS >     start=19, blocks=237, type=USPACE >     start=256, blocks=1, type=ANCHOR >     start=257, blocks=16, type=PVDS >     start=273, blocks=1, type=LVID >     start=274, blocks=26524, type=PSPACE >     start=26798, blocks=1, type=ANCHOR >     start=26799, blocks=239, type=USPACE >     start=27038, blocks=16, type=RVDS >     start=27054, blocks=1, type=ANCHOR > > >     localhost:/home/terje/Videoklipp # mount -o loop >     /tmp/newfilename.udfs /mnt/test > >     localhost:/home/terje/Videoklipp # bdwrite /mnt/test >     2008_m2t_pcm_bluray.mts > >     but got an error message: > >     bdwrite: error while loading shared libraries: >     libIlmImf-2_3.so.24: cannot open shared object file: No such file >     or directory > >

Den 22.11.2022 21:50, skrev Terje J. Hanssen:

Den 22.11.2022 18:21, skrev Andrew Randrianasulu:

...

вт, 22 нояб. 2022 г., 19:53 Terje J. Hanssen <[email protected]>:

Den 22.11.2022 16:30, skrev Andrew Randrianasulu:

...

вт, 22 нояб. 2022 г., 00:20 Terje J. Hanssen <[email protected]>:

Den 13.11.2022 00:07, skrev Andrew Randrianasulu: > > > сб, 12 нояб. 2022 г., 21:43 Terje J. Hanssen <[email protected]>: > >     Derived from another thread "HDV files at archive.org <http://archive.org> >     <http://archive.org>" I extract and continue this topic in a new >     thread here. >     And if this isn't documented yet, I suggest some with knowledge to >     setup a Readme and manual section for this. > > > > > already there > > https://cinelerra-gg.org/download/CinelerraGG_Manual/Managing_AppImage.html#... > I think I didn't recognized this section equivalent to the appimage user-guide section.

> > try to just unpack appimage and then set > > export LD_LIBRARY_PATH=$BCASTDIR:$LD_LIBRARY_PATH > > where $BCASTDIR points at unpacked/mounted appimages's usr/lib > > before running bdwrite >

While waiting for my ordered BD-R/RE discs, I have tried again and attach the new terminal output with comments as follows:

/home/terje/Applications/CinGG-20221031-x86_64.AppImage --appimage-offset (AppImageLauncher:16794): GdkPixbuf-CRITICAL **: 20:50:50.433: gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF (pixbuf)' failed 189632

sudo mount /home/terje/Applications/CinGG-20221031-x86_64.AppImage /home/terje/mountpoint/ -o offset=189632 [sudo] passord for root:

find /home/terje/mountpoint -name lib /home/terje/mountpoint/usr/lib

export LD_LIBRARY_PATH=/home/terje/mountpoint/usr/lib:$LD_LIBRARY_PATH

ls -la 2008_m2t_pcm_bluray.mts -rw-r--r-- 1 terje users 47020032 Nov 11 22:06 2008_m2t_pcm_bluray.mts

mkudffs -b 2048 /tmp/newfilename.udfs 27055 filename=/tmp/newfilename.udfs label=LinuxUDF uuid=637bd9b8ea861ad7 blocksize=2048 blocks=27055 udfrev=201 start=0, blocks=16, type=RESERVED start=16, blocks=3, type=VRS start=19, blocks=237, type=USPACE start=256, blocks=1, type=ANCHOR start=257, blocks=16, type=PVDS start=273, blocks=1, type=LVID start=274, blocks=26524, type=PSPACE start=26798, blocks=1, type=ANCHOR start=26799, blocks=239, type=USPACE start=27038, blocks=16, type=RVDS start=27054, blocks=1, type=ANCHOR

mount -o loop /tmp/newfilename.udfs /mnt/test

find /home/terje/mountpoint -name bdwrite /home/terje/mountpoint/usr/bin/bdwrite

/home/terje/mountpoint/usr/bin/bdwrite /mnt/test 2008_m2t_pcm_bluray.mts

No interlace error ! --------------------

ls /mnt/test BDMV  CERTIFICATE

tree -h /mnt/test/BDMV /mnt/test/BDMV ├── [  40]  AUXDATA ├── [ 332]  BACKUP │   ├── [  40]  BDJO │   ├── [  92]  CLIPINF │   │   └── [ 480]  00000.clpi │   ├── [  40]  JAR │   ├── [ 110]  MovieObject.bdmv │   ├── [  92]  PLAYLIST │   │   └── [ 184]  00000.mpls │   └── [ 124]  index.bdmv ├── [  40]  BDJO ├── [  92]  CLIPINF │   └── [ 480]  00000.clpi ├── [  40]  JAR ├── [  40]  META ├── [ 110]  MovieObject.bdmv ├── [  92]  PLAYLIST │   └── [ 184]  00000.mpls ├── [  92]  STREAM │   └── [ 45M]  00000.m2ts └── [ 124]  index.bdmv

12 directories, 9 files

---------------------------------------

Finally 9 files and [ 45M]  00000.m2ts

I was able to open /mnt/test/BDMV with VLC and playback video and pcm_bluray video OK

------------------------------------------------------ but not with mplayer as follows:

umount /mnt/test

which mplayer /usr/bin/mplayer

mplayer -vo null br://tmp/newfilename.udfs Creating config file: /root/.mplayer/config MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control.

Playing br://tmp/newfilename.udfs. The hostname option must be an integer: tmp Struct bluray, field hostname parsing error: tmp disc.c:333: failed opening UDF image newfilename.udfs disc.c:437: error opening file BDMV/index.bdmv disc.c:437: error opening file BDMV/BACKUP/index.bdmv bluray.c:2646: nav_get_title_list(newfilename.udfs/) failed Couldn't open Blu-ray device: newfilename.udfs No stream found to handle url br://tmp/newfilename.udfs

Exiting... (End of file)

mplayer works for me if I start it from /tmp (where test file is located)

I will try also that next.

=============================== 23/11-22 =============================== mplayer continued -- sorry, the following long output as root, seems like lack og audio config and other errors? localhost:~ # cd /tmp localhost:/tmp # mplayer -vo null br://tmp/newfilename.udfs MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing br://tmp/newfilename.udfs. The hostname option must be an integer: tmp Struct bluray, field hostname parsing error: tmp libavformat version 58.76.100 (external) bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. TS file format detected. bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. VIDEO MPEG2(pid=4113) AUDIO PCMBR(pid=4352) NO SUBS (yet)!  PROGRAM N. 1 bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. VIDEO:  MPEG2  1440x1080  (aspect 3)  25.000 fps  25000.0 kbps (3125.0 kbyte/s) ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 58.134.100 (external) [mpeg2video @ 0x7fd57c9aa560]Requested frame threading with a custom get_buffer2() implementation which is not marked as thread safe. This is not supported anymore, make your callback thread-safe. Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2) ========================================================================== ========================================================================== Trying to force audio codec driver family libmad... Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000) Selected audio codec: [fflpcm] afm: ffmpeg (Blu-ray LPCM) ========================================================================== AO: [pulse] Init failed: Connection refused Failed to initialize audio driver 'pulse' [AO_ALSA] alsa-lib: pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused [AO_ALSA] Playback open error: Connection refused Failed to initialize audio driver 'alsa' [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory Failed to initialize audio driver 'oss' No such audio driver 'esd' No such audio driver 'arts' [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory [AO_ALSA] alsa-lib: pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused [AO_ALSA] Playback open error: Connection refused AO: [pulse] Init failed: Connection refused Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock [JACK] cannot open server [AO SDL] Samplerate: 48000Hz Channels: Stereo Format s16le [AO_ALSA] alsa-lib: pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused [AO SDL] Unable to open audio: No available audio device DVB card number must be between 1 and 4 AO: [null] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... Bad stream state, please report as bug! Movie-Aspect is undefined - no prescaling applied. VO: [null] 1440x1080 => 1440x1080 Planar YV12  [zoom] Bad stream state, please report as bug! Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [null] 1440x1080 => 1920x1080 Planar YV12  [zoom] A:   1.5 V:   1.4 A-V:  0.054 ct:  0.000   2/  2 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! .....snip ........... Bad stream state, please report as bug! A:  14.7 V:  14.7 A-V: -0.000 ct:  0.040 334/334 10%  0%  0.7% 0 0 Bad stream state, please report as bug! A:  14.8 V:  14.8 A-V:  0.080 ct:  0.148 335/335 10%  0%  0.7% 0 0 Exiting... (End of file) ==========================

...

But thinking more about this topic that has several cumbersome and error-phrone manual steps. Appimage has even complicated these, not at least for occasionally users. Therefore I will throw in the following suggestion or RFE:

Will it be possible or manageable to integrate and run the bundled 'bdwrite' to Bluray within the Cin-GG's run-time environment? I.e we now has File > BD render (and DVD render). What to add File > "BD Write" and get sub-window with options to select HDV/mpeg2 without re-encoding (compression loss) of video from HDD file, select re-encoding of the MP2 audio to AC3 or PCM for Blu-ray etc.

may be try to encapsulate manual steps into bash script and then run this script from shell commands system? (not sure how to handle sudo password entering .... xdialog conditional on X DISPLAY variable? ah someone suggested 'sudo -A' and custom script https://askubuntu.com/questions/314395/proper-way-to-let-user-enter-password... )

https://cinelerra-gg.org/download/CinelerraGG_Manual/Menu_Bar_Shell_Commands...

if we develop it into being even relatively distro-agnostic and error-proof it hopefully can be included into future versions of CinGG

making mpeg2 hdv compatible _encoding_ profile is also on table, I think ... (this one can be integrated at Blu-ray specific menu choice, because I put some lines of code in there for supporting pcm audio on h264 encoded BD)

I also found some remaints of direct-copy 'smart-render-like' feature in Cinelerra-CV's libquicktime:

https://github.com/cinelerra-cv-team/cinelerra-cv/blob/954a91e72bba1ed1ce641...

around line 730 but it was only working (apparently) with some mpeg4 _divx_ movs, not mpeg2s.

developing mpeg direct-copy routines remained big TODO item. I look at related code from time to time but no promises, sadly.

I just add my extracted notes and urls about Smart rendering HDV in Vegas, Premiere Pro:

What is smart rendering? Smart Render *analyzes a video for any previously rendered sections and renders only the new or revised sections*. This can reduce rendering time significantly. Corel VideoStudio's SmartRender feature makes previewing and creating movies a lot faster.

How To Enable Smart Render

You can enable smart render with video editing software like VideoStudio. Follow along with our tutorial below to learn the easiest way to enable smart render. Rendering can take an enormous amount of time in video editing, especially when the video is long and includes a large number of effects. VideoStudio has implemented a smart render system to speed that process up and only render the parts of the film that need rendering. Read on to find out how it works.

Smart Render analyzes a video for any previously rendered sections and renders only the new or revised sections. This can reduce rendering time significantly.

Corel VideoStudio’s SmartRender feature makes previewing and creating movies a lot faster. When you preview your video project for the first time, VideoStudio ‘renders’ the project by creating a temporary preview file on your hard drive which combines the video, image, and audio clips with the special effects which you applied to them. The SmartRender feature detects any changes in your project and if there are no changes, instantly plays back the preview file. If there are changes (for instance, when titles, video filters or transition effects have been added), it renders out only the edited portions, making render times much shorter and faster.

https://www.vegascreativesoftware.info/us/forum/hdv-smart-rendering-and-bada... https://www.dvinfo.net/forum/archive/index.php/t-116464.html

https://helpx.adobe.com/premiere-pro/using/smart-rendering.html

https://larryjordan.com/articles/premiere-pro-export-faster-with-smart-rende...

https://workflow.frame.io/guide/smart-rendering

https://blog.frame.io/2021/06/07/premiere-pro-max-render-quality-max-bit-dep...

https://www.kevinmonahan.net/?p=88

...

After all, Blu-ray images on BD-R/RE discs and possible simpler DVD-R/RW discs for exchange, are more reliable and playable backups for video on tape or HDD.

...

> > > >     Den 12.11.2022 16:36, skrev Andrew Randrianasulu: >     > >     > >     > сб, 12 нояб. 2022 г., 18:30 Terje J. Hanssen >     <[email protected]> <mailto:[email protected]>: >     > > >     >     "Finally home again", just to discover that I have not >     'bdwrite' available on my workstations upgraded with the latest >     31. Oct 2022 CinGG appimages. >     >     Therefore I wonder if CinGG Appimage not provide and make it >     possible to run bdwrite from command line (similar like no ffmpeg) >     without a single user build? >     > >     > >     > I think you can unpack/mount appimages . >     > >     > > https://docs.appimage.org/user-guide/run-appimages.html#mount-an-appimage >     > >     > then you hopefully will find bdwrite inside .... >     > >     > or slightly down this question  documentation said you can >     extract content of appimage into directory. So, if bdwrite >     actually there you can run it from there or copy it to some place >     > > > >     1) >     First attempt as Type 1 appimage: > >     terje@localhost:~> sudo mount >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >     /home/terje/mountpoint/ > >     [sudo] passord for root: >     mount: /home/terje/mountpoint: wrong fs type, bad option, bad >     superblock on /dev/loop0, missing codepage or helper program, or >     other error. > >     terje@localhost:~> umount /home/terje/mountpoint/ >     umount: /home/terje/mountpoint: not mounted. > > >     2) >     Second attempt as Type 2 appimage: > >     terje@localhost:~> >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >     --appimage-offset > >     but why all these warnings and failed messages? >     ---------- > >     /usr/bin/AppImageLauncher: /usr/lib64/libcurl.so.4: no version >     information available (required by >  /usr/bin/../lib/x86_64-linux-gnu/appimagelauncher/libappimageupdate.so) >     Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use >     QT_QPA_PLATFORM=wayland to run on Wayland anyway. > >     ** (AppImageLauncher:7534): WARNING **: 17:40:13.433: Pixbuf >     theme: Cannot load pixmap file >  /usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png: >     Feil under lasting av bilde >  «/usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png»: >     Fatal feil i PNG-bildefil: bad parameters to zlib > > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_width: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     ** (AppImageLauncher:7534): WARNING **: 17:40:13.433: Invalid >     borders specified for theme pixmap: >  /usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png, >     borders don't fit within the image > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_pixels_with_length: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_width: assertion 'GDK_IS_PIXBUF (pixbuf)' failed > >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: 17:40:13.433: >     gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF (pixbuf)' failed >     189632 >     ---------------- > > >     terje@localhost:~> sudo mount >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >     /home/terje/mountpoint/ -o offset=189632 >     [sudo] passord for root: > >     terje@localhost:~> cd mountpoint >     terje@localhost:~/mountpoint> ls >     AppRun  cin.desktop  cin.svg  usr >     terje@localhost:~/mountpoint> ls -la >     totalt 40 >     drwxr-xr-x   3 root  root    102 okt.  31 15:24 . >     drwxr-xr-x 124 terje users 36864 nov.  12 17:31 .. >     lrwxrwxrwx   1 root  root     11 okt.  31 15:24 AppRun -> usr/bin/cin >     lrwxrwxrwx   1 root  root     34 okt.  31 15:24 cin.desktop -> >     usr/share/applications/cin.desktop >     lrwxrwxrwx   1 root  root     45 okt.  31 15:24 cin.svg -> >  usr/share/icons/hicolor/scalable/apps/cin.svg >     lrwxrwxrwx   1 root  root      7 okt.  31 15:24 .DirIcon -> cin.svg >     drwxr-xr-x   5 root  root     62 okt.  31 15:23 usr > >     terje@localhost:~/mountpoint> find . -name bdwrite >     ./usr/bin/bdwrite > >     terje@localhost:~/mountpoint> stat ./usr/bin/bdwrite >       Fil: ./usr/bin/bdwrite >       Størrelse: 35940792 [tab]Blokker: 70197      IO Blokk: 1024 >     vanlig fil >     Enhet: 700h/1792d       Datanode: 12          Lenker: 1 >     Tilgang: (0755/-rwxr-xr-x)  Uid: (    0/    root) Gid: (    0/ >     root) >     Tilgang: 2022-10-31 15:23:57.000000000 +0100 >     Omgjøring: 2022-10-31 15:23:57.000000000 +0100 >     Endring: 2022-10-31 15:23:57.000000000 +0100 >      Fødsel: - > >     terje@localhost:~/mountpoint> which bdwrite >     which: no bdwrite in (/home/terje/bin:/usr/local/bin:/usr/bin:/bin) > >     Copied the mounted bdwrite to /usr/bin: > >     terje@localhost:~/mountpoint> sudo cp ./usr/bin/bdwrite /usr/bin >     [sudo] passord for root: >     terje@localhost:~/mountpoint> ls -la /usr/bin/bdwrite >     -rwxr-xr-x 1 root root 35940792 nov.  12 18:00 /usr/bin/bdwrite > >     ============= > >     3) >     Tried the extracted bdwrite with a hdv-file transcoded to Blu-ray >     pcm_bluray audio and mts stream > >     localhost:~ # cd /home/terje/Videoklipp >     localhost:/home/terje/Videoklipp # ls -1 *.mts >     2008_m2t-ac3.mts >     2008_m2t_pcm_bluray.mts >     hdv01_05_m2t_pcm_bluray.mts >     hdv01_m2t_pcm_bluray.mts >     hdv_iLink_m2t_pcm_bluray.mts > > >     localhost:/home/terje/Videoklipp # ffprobe -hide_banner >     2008_m2t_pcm_bluray.mts >     Input #0, mpegts, from '2008_m2t_pcm_bluray.mts': >       Duration: 00:00:13.44, start: 1.440000, bitrate: 27988 kb/s >       Program 1 >         Metadata: >           service_name    : Service01 >           service_provider: FFmpeg >       Stream #0:0[0x1011]: Video: mpeg2video (Main) ([2][0][0][0] / >     0x0002), yuv420p(tv, bt709, top first), 1440x1080 [SAR 4:3 DAR >     16:9], 25000 kb/s, 25 fps, 25 tbr, 90k tbn >         Side data: >           cpb: bitrate max/min/avg: 25000000/0/0 buffer size: 7340032 >     vbv_delay: N/A >       Stream #0:1[0x1100]: Audio: pcm_bluray ([128][0][0][0] / >     0x0080), 48000 Hz, stereo, s16, 1536 kb/s >     localhost:/home/terje/Videoklipp # du -sb *.mts >     43333624        2008_m2t-ac3.mts >     47020032 2008_m2t_pcm_bluray.mts >     1603362816 hdv01_05_m2t_pcm_bluray.mts >     2299017216 hdv01_m2t_pcm_bluray.mts >     399237120 hdv_iLink_m2t_pcm_bluray.mts > > >     localhost:/home/terje/Videoklipp # ls -la 2008_m2t_pcm_bluray.mts >     -rw-r--r-- 1 terje users 47020032 Nov 11 22:06 2008_m2t_pcm_bluray.mts > > >     localhost:/home/terje/Videoklipp # mkudffs -b 2048 >     /tmp/newfilename.udfs 27055 >     filename=/tmp/newfilename.udfs >     label=LinuxUDF >     uuid=636fdd9d0eee73bf >     blocksize=2048 >     blocks=27055 >     udfrev=201 >     start=0, blocks=16, type=RESERVED >     start=16, blocks=3, type=VRS >     start=19, blocks=237, type=USPACE >     start=256, blocks=1, type=ANCHOR >     start=257, blocks=16, type=PVDS >     start=273, blocks=1, type=LVID >     start=274, blocks=26524, type=PSPACE >     start=26798, blocks=1, type=ANCHOR >     start=26799, blocks=239, type=USPACE >     start=27038, blocks=16, type=RVDS >     start=27054, blocks=1, type=ANCHOR > > >     localhost:/home/terje/Videoklipp # mount -o loop >     /tmp/newfilename.udfs /mnt/test > >     localhost:/home/terje/Videoklipp # bdwrite /mnt/test >     2008_m2t_pcm_bluray.mts > >     but got an error message: > >     bdwrite: error while loading shared libraries: >     libIlmImf-2_3.so.24: cannot open shared object file: No such file >     or directory > >

Den 24.11.2022 02:34, skrev Andrew Randrianasulu:

ср, 23 нояб. 2022 г., 23:27 Terje J. Hanssen <[email protected]>:

Den 22.11.2022 21:50, skrev Terje J. Hanssen: > > > Den 22.11.2022 18:21, skrev Andrew Randrianasulu: >> >> >> вт, 22 нояб. 2022 г., 19:53 Terje J. Hanssen <[email protected]>: >> >> >> >>     Den 22.11.2022 16:30, skrev Andrew Randrianasulu: >>> >>> >>>     вт, 22 нояб. 2022 г., 00:20 Terje J. Hanssen >>>     <[email protected]>: >>> >>> >>> >>>         Den 13.11.2022 00:07, skrev Andrew Randrianasulu: >>>         > >>>         > >>>         > сб, 12 нояб. 2022 г., 21:43 Terje J. Hanssen >>>         <[email protected]>: >>>         > >>>         >     Derived from another thread "HDV files at archive.org <http://archive.org> >>>         <http://archive.org> >>>         >     <http://archive.org>" I extract and continue this >>>         topic in a new >>>         >     thread here. >>>         >     And if this isn't documented yet, I suggest some with >>>         knowledge to >>>         >     setup a Readme and manual section for this. >>>         > >>>         > >>>         > >>>         > >>>         > already there >>>         > >>>         > >>> https://cinelerra-gg.org/download/CinelerraGG_Manual/Managing_AppImage.html#... >>>         > >>>         I think I didn't recognized this section equivalent to the >>>         appimage >>>         user-guide section. >>> >>>         > >>>         > try to just unpack appimage and then set >>>         > >>>         > export LD_LIBRARY_PATH=$BCASTDIR:$LD_LIBRARY_PATH >>>         > >>>         > where $BCASTDIR points at unpacked/mounted appimages's usr/lib >>>         > >>>         > before running bdwrite >>>         > >>> >>>         While waiting for my ordered BD-R/RE discs, I have tried >>>         again and >>>         attach the new terminal output with comments as follows: >>> >>>  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >>>         --appimage-offset >>>         (AppImageLauncher:16794): GdkPixbuf-CRITICAL **: 20:50:50.433: >>>         gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF (pixbuf)' failed >>>         189632 >>> >>>         sudo mount >>>  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >>>         /home/terje/mountpoint/ -o offset=189632 >>>         [sudo] passord for root: >>> >>> >>>         find /home/terje/mountpoint -name lib >>>         /home/terje/mountpoint/usr/lib >>> >>>         export >>>  LD_LIBRARY_PATH=/home/terje/mountpoint/usr/lib:$LD_LIBRARY_PATH >>> >>>         ls -la 2008_m2t_pcm_bluray.mts >>>         -rw-r--r-- 1 terje users 47020032 Nov 11 22:06 >>>         2008_m2t_pcm_bluray.mts >>> >>> >>>         mkudffs -b 2048 /tmp/newfilename.udfs 27055 >>>         filename=/tmp/newfilename.udfs >>>         label=LinuxUDF >>>         uuid=637bd9b8ea861ad7 >>>         blocksize=2048 >>>         blocks=27055 >>>         udfrev=201 >>>         start=0, blocks=16, type=RESERVED >>>         start=16, blocks=3, type=VRS >>>         start=19, blocks=237, type=USPACE >>>         start=256, blocks=1, type=ANCHOR >>>         start=257, blocks=16, type=PVDS >>>         start=273, blocks=1, type=LVID >>>         start=274, blocks=26524, type=PSPACE >>>         start=26798, blocks=1, type=ANCHOR >>>         start=26799, blocks=239, type=USPACE >>>         start=27038, blocks=16, type=RVDS >>>         start=27054, blocks=1, type=ANCHOR >>> >>>         mount -o loop /tmp/newfilename.udfs /mnt/test >>> >>>         find /home/terje/mountpoint -name bdwrite >>>  /home/terje/mountpoint/usr/bin/bdwrite >>> >>>  /home/terje/mountpoint/usr/bin/bdwrite /mnt/test >>>         2008_m2t_pcm_bluray.mts >>> >>>         No interlace error ! >>>         -------------------- >>> >>>         ls /mnt/test >>>         BDMV  CERTIFICATE >>> >>>         tree -h /mnt/test/BDMV >>>         /mnt/test/BDMV >>>         ├── [  40]  AUXDATA >>>         ├── [ 332]  BACKUP >>>         │   ├── [  40]  BDJO >>>         │   ├── [  92]  CLIPINF >>>         │   │   └── [ 480]  00000.clpi >>>         │   ├── [  40]  JAR >>>         │   ├── [ 110]  MovieObject.bdmv >>>         │   ├── [  92]  PLAYLIST >>>         │   │   └── [ 184]  00000.mpls >>>         │   └── [ 124]  index.bdmv >>>         ├── [  40]  BDJO >>>         ├── [  92]  CLIPINF >>>         │   └── [ 480]  00000.clpi >>>         ├── [  40]  JAR >>>         ├── [  40]  META >>>         ├── [ 110]  MovieObject.bdmv >>>         ├── [  92]  PLAYLIST >>>         │   └── [ 184]  00000.mpls >>>         ├── [  92]  STREAM >>>         │   └── [ 45M]  00000.m2ts >>>         └── [ 124]  index.bdmv >>> >>>         12 directories, 9 files >>> >>>  --------------------------------------- >>> >>>         Finally 9 files and [ 45M] 00000.m2ts >>> >>>         I was able to open /mnt/test/BDMV with VLC and playback >>>         video and >>>         pcm_bluray video OK >>> >>>  ------------------------------------------------------ >>>         but not with mplayer as follows: >>> >>> >>>         umount /mnt/test >>> >>>         which mplayer >>>         /usr/bin/mplayer >>> >>>         mplayer -vo null br://tmp/newfilename.udfs >>>         Creating config file: /root/.mplayer/config >>>         MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team >>>         do_connect: could not connect to socket >>>         connect: No such file or directory >>>         Failed to open LIRC support. You will not be able to use >>>         your remote >>>         control. >>> >>>         Playing br://tmp/newfilename.udfs. >>>         The hostname option must be an integer: tmp >>>         Struct bluray, field hostname parsing error: tmp >>>         disc.c:333: failed opening UDF image newfilename.udfs >>>         disc.c:437: error opening file BDMV/index.bdmv >>>         disc.c:437: error opening file BDMV/BACKUP/index.bdmv >>>         bluray.c:2646: nav_get_title_list(newfilename.udfs/) failed >>>         Couldn't open Blu-ray device: newfilename.udfs >>>         No stream found to handle url br://tmp/newfilename.udfs >>> >>> >>>         Exiting... (End of file) >>> >>> >>> >>>     mplayer works for me if I start it from /tmp (where test file is >>>     located) >> >>     I will try also that next. >>

=============================== 23/11-22 ===============================

mplayer continued

-- sorry, the following long output as root, seems like lack og audio config and other errors?

yeah ... but again, you can try to make this udfs file readable for usual user and try again ...

anyway, I historically used mplayer because it was faster to build and rebuild afresh, compared to vlc with million deps.  If it works in VLC - I think you can try and move into experiments with longer files.

============================ 24/11-22 Testing playback with VLC and Mplayer as user on (mounted) /tmp/test/BDMV and on (unmounted) /tmp/newfilename.udfs ============================= VlC as user playbacks video and audio OK recursively from (mounted) /mnt/test/BDMV, but with some failed messages: terje@localhost:~> vlc /mnt/test/BDMV VLC media player 3.0.17.3 Vetinari (revision 3.0.13-8-g41878ff4f2) libdvdread: Encrypted DVD support unavailable. libdvdread: Couldn't find device name. [000055828618fd30] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway. libdvdread: Encrypted DVD support unavailable. libdvdread: Couldn't find device name. libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. [00007f2208001160] dvdnav demux error: vm: vm: failed to read VIDEO_TS.IFO libdvdread: Encrypted DVD support unavailable. libdvdread: Couldn't find device name. libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. libdvdread: Encrypted DVD support unavailable. libdvdread: Couldn't find device name. libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. libdvdread: Encrypted DVD support unavailable. libdvdread: Couldn't find device name. libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. ................... [00007f2260004030] dvdnav demux error: vm: vm: failed to read VIDEO_TS.IFO libdvdread: Encrypted DVD support unavailable. libdvdread: Couldn't find device name. libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. [00007f226000b8f0] dvdnav demux error: vm: vm: failed to read VIDEO_TS.IFO [00007f2204008cc0] gl gl: Initialized libplacebo v4.192.1 (API v192) [00007f2204008cc0] gl gl: Initialized libplacebo v4.192.1 (API v192) Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: Ingen slik fil eller filkatalog [00007f220505f950] gl gl: Initialized libplacebo v4.192.1 (API v192) QObject::~QObject: Timers cannot be stopped from another thread ============================= Mplayer as user doesn't playback/find audio and video with just path to /mnt/test/BDMV Mplayer as user playback audio an video just with full path to /mnt/test/BDMV/STREAM/00000.m2ts -------------- terje@localhost:~> mplayer /mnt/test/BDMV/STREAM/00000.m2ts MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /mnt/test/BDMV/STREAM/00000.m2ts. libavformat version 58.76.100 (external) TS file format detected. VIDEO MPEG2(pid=4113) AUDIO PCMBR(pid=4352) NO SUBS (yet)!  PROGRAM N. 1 VIDEO:  MPEG2  1440x1080  (aspect 3)  25.000 fps  25000.0 kbps (3125.0 kbyte/s) X11 error: BadMatch (invalid parameter attributes) [VO_XV] It seems there is no Xvideo support for your video card available. [VO_XV] Run 'xvinfo' to verify its Xv support and read [VO_XV] DOCS/HTML/en/video.html#xv! [VO_XV] See 'mplayer -vo help' for other (non-xv) video out drivers. [VO_XV] Try -vo x11. ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 58.134.100 (external) [mpeg2video @ 0x7fb394081560]Requested frame threading with a custom get_buffer2() implementation which is not marked as thread safe. This is not supported anymore, make your callback thread-safe. Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2) ========================================================================== Load subtitles in /mnt/test/BDMV/STREAM/ ========================================================================== Trying to force audio codec driver family libmad... Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000) Selected audio codec: [fflpcm] afm: ffmpeg (Blu-ray LPCM) ========================================================================== AO: [pulse] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... Bad stream state, please report as bug! Movie-Aspect is undefined - no prescaling applied. VO: [x11] 1440x1080 => 1440x1080 Planar YV12  [zoom] [swscaler @ 0x7fb39a79c0e0]bicubic scaler, from yuv420p to bgra using MMXEXT [swscaler @ 0x7fb39a79c0e0]using unscaled yuv420p -> bgra special converter Bad stream state, please report as bug! Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [x11] 1440x1080 => 1920x1080 Planar YV12  [zoom] A:   1.5 V:   1.4 A-V:  0.106 ct:  0.000   2/  2 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.5 V:   1.5 A-V:  0.068 ct: -0.000   3/  3 ??% ??% ??,?% 1 0 Bad stream state, please repo ..................snip Bad stream state, please report as bug! A:  14.7 V:  14.7 A-V:  0.016 ct:  0.002 333/333 12% 20%  0.8% 1 0 Bad stream state, please report as bug! A:  14.7 V:  14.7 A-V:  0.006 ct:  0.002 334/334 12% 20%  0.8% 1 0 Bad stream state, please report as bug! A:  14.8 V:  14.8 A-V:  0.079 ct:  0.110 335/335 12% 20%  0.8% 1 0 Exiting... (End of file) ############################# I'm a bit confused and would like to get clarified what really happends when/after entering "umount /mnt/test"? That is the difference between using /tmp/test and /tmp/newfilename.udf ======================= VlC as user playbacks video and audio OK from newfilename.udfs ------------------ terje@localhost:/tmp> vlc VLC media player 3.0.17.3 Vetinari (revision 3.0.13-8-g41878ff4f2) [00005643603ead30] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway. [00007fd4a0001170] libbluray demux: First play: 1, Top menu: 1 HDMV Titles: 1, BD-J Titles: 0, Other: 0 [00007fd4a0001170] libbluray demux: Adding ES 4113 select 1 [00007fd4a0001170] libbluray demux: Adding ES 4352 select 1 [00007fd48c007260] gl gl: Initialized libplacebo v4.192.1 (API v192) [00007fd48c007260] gl gl: Initialized libplacebo v4.192.1 (API v192) Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: Ingen slik fil eller filkatalog [00007fd48d016510] gl gl: Initialized libplacebo v4.192.1 (API v192) hdmv_vm.c:450: _resume_from_play_pl(): object not playing playlist ! hdmv_vm.c:450: _resume_from_play_pl(): object not playing playlist ! hdmv_vm.c:450: _resume_from_play_pl(): object not playing playlist ! hdmv_vm.c:450: _resume_from_play_pl(): object not playing playlist ! [00007f9c84001170] libbluray demux: Closing overlays. QObject::~QObject: Timers cannot be stopped from another thread ##################### Mplayer as user playback only Audio from /tmp/newfilename.udfs ----------------------- terje@localhost:/tmp> mplayer -vo null br://tmp/newfilename.udfs MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing br://tmp/newfilename.udfs. The hostname option must be an integer: tmp Struct bluray, field hostname parsing error: tmp libavformat version 58.76.100 (external) bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. TS file format detected. bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. VIDEO MPEG2(pid=4113) AUDIO PCMBR(pid=4352) NO SUBS (yet)!  PROGRAM N. 1 bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. VIDEO:  MPEG2  1440x1080  (aspect 3)  25.000 fps  25000.0 kbps (3125.0 kbyte/s) ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 58.134.100 (external) [mpeg2video @ 0x7f3dc0bf3560]Requested frame threading with a custom get_buffer2() implementation which is not marked as thread safe. This is not supported anymore, make your callback thread-safe. Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2) ========================================================================== ========================================================================== Trying to force audio codec driver family libmad... Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000) Selected audio codec: [fflpcm] afm: ffmpeg (Blu-ray LPCM) terje@localhost:/tmp> mplayer -vo null br://tmp/newfilename.udfs MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing br://tmp/newfilename.udfs. The hostname option must be an integer: tmp Struct bluray, field hostname parsing error: tmp libavformat version 58.76.100 (external) bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. TS file format detected. bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. VIDEO MPEG2(pid=4113) AUDIO PCMBR(pid=4352) NO SUBS (yet)!  PROGRAM N. 1 bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. VIDEO:  MPEG2  1440x1080  (aspect 3)  25.000 fps  25000.0 kbps (3125.0 kbyte/s) ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 58.134.100 (external) [mpeg2video @ 0x7fbf5abde560]Requested frame threading with a custom get_buffer2() implementation which is not marked as thread safe. This is not supported anymore, make your callback thread-safe. Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2) ========================================================================== ========================================================================== Trying to force audio codec driver family libmad... Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000) Selected audio codec: [fflpcm] afm: ffmpeg (Blu-ray LPCM) ========================================================================== AO: [pulse] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... Bad stream state, please report as bug! Movie-Aspect is undefined - no prescaling applied. VO: [null] 1440x1080 => 1440x1080 Planar YV12  [zoom] Bad stream state, please report as bug! Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [null] 1440x1080 => 1920x1080 Planar YV12  [zoom] A:   1.5 V:   1.4 A-V:  0.084 ct:  0.000   2/  2 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.5 V:   1.5 A-V:  0.052 ct:  0.004   3/  3 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.6 V:   1.5 A-V:  0.044 ct:  0.008   4/  4 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.6 V:   1.6 A-V:  0.032 ct:  0.011   5/  5 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.6 V:   1.6 A-V:  0.029 ct:  0.014   6/  6 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.7 V:   1.6 A-V:  0.026 ct:  0.016   7/  7 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.7 V:   1.7 A-V:  0.023 ct:  0.019   8/  8 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.7 V:   1.7 A-V:  0.021 ct:  0.021   9/  9 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.8 V:   1.8 A-V:  0.019 ct:  0.022  10/ 10 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.8 V:   1.8 A-V:  0.017 ct:  0.024  11/ 11 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.9 V:   1.8 A-V:  0.016 ct:  0.026  12/ 12 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! ........snip Bad stream state, please report as bug! A:  14.7 V:  14.7 A-V:  0.000 ct:  0.040 333/333 10%  0%  0.4% 0 0 Bad stream state, please report as bug! A:  14.7 V:  14.7 A-V:  0.000 ct:  0.040 334/334 10%  0%  0.4% 0 0 Bad stream state, please report as bug! A:  14.7 V:  14.8 A-V: -0.027 ct:  0.132 335/335 10%  0%  0.4% 0 0 Exiting... (End of file) ================================

localhost:~ # cd /tmp localhost:/tmp # mplayer -vo null br://tmp/newfilename.udfs MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control.

Playing br://tmp/newfilename.udfs. The hostname option must be an integer: tmp Struct bluray, field hostname parsing error: tmp libavformat version 58.76.100 (external) bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. TS file format detected. bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. VIDEO MPEG2(pid=4113) AUDIO PCMBR(pid=4352) NO SUBS (yet)!  PROGRAM N. 1 bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. VIDEO:  MPEG2  1440x1080  (aspect 3)  25.000 fps  25000.0 kbps (3125.0 kbyte/s) ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 58.134.100 (external) [mpeg2video @ 0x7fd57c9aa560]Requested frame threading with a custom get_buffer2() implementation which is not marked as thread safe. This is not supported anymore, make your callback thread-safe. Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2) ========================================================================== ========================================================================== Trying to force audio codec driver family libmad... Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000) Selected audio codec: [fflpcm] afm: ffmpeg (Blu-ray LPCM) ========================================================================== AO: [pulse] Init failed: Connection refused Failed to initialize audio driver 'pulse' [AO_ALSA] alsa-lib: pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused

[AO_ALSA] Playback open error: Connection refused Failed to initialize audio driver 'alsa' [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory Failed to initialize audio driver 'oss' No such audio driver 'esd' No such audio driver 'arts' [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory [AO_ALSA] alsa-lib: pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused

[AO_ALSA] Playback open error: Connection refused AO: [pulse] Init failed: Connection refused Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock [JACK] cannot open server [AO SDL] Samplerate: 48000Hz Channels: Stereo Format s16le [AO_ALSA] alsa-lib: pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused

[AO SDL] Unable to open audio: No available audio device DVB card number must be between 1 and 4 AO: [null] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... Bad stream state, please report as bug! Movie-Aspect is undefined - no prescaling applied. VO: [null] 1440x1080 => 1440x1080 Planar YV12  [zoom] Bad stream state, please report as bug! Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [null] 1440x1080 => 1920x1080 Planar YV12  [zoom] A:   1.5 V:   1.4 A-V:  0.054 ct:  0.000   2/  2 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! .....snip ...........

Bad stream state, please report as bug! A:  14.7 V:  14.7 A-V: -0.000 ct:  0.040 334/334 10%  0% 0.7% 0 0 Bad stream state, please report as bug! A:  14.8 V:  14.8 A-V:  0.080 ct:  0.148 335/335 10%  0% 0.7% 0 0

Exiting... (End of file)

==========================

>>     But thinking more about this topic that has several cumbersome >>     and error-phrone manual steps. Appimage has even complicated >>     these, not at least for occasionally users. >>     Therefore I will throw in the following suggestion or RFE: >> >>     Will it be possible or manageable to integrate and run the >>     bundled 'bdwrite' to Bluray within the Cin-GG's run-time environment? >>     I.e we now has File > BD render (and DVD render). What to add >>     File > "BD Write" and get sub-window with options to select >>     HDV/mpeg2 without re-encoding (compression loss) of video from >>     HDD file, select re-encoding of the MP2 audio to AC3 or PCM for >>     Blu-ray etc. >> >> >> >> >> may be try to encapsulate manual steps into bash script and then run >> this script from shell commands system? (not sure how to handle sudo >> password entering .... xdialog conditional on X DISPLAY variable? ah >> someone suggested 'sudo -A' and custom script >> https://askubuntu.com/questions/314395/proper-way-to-let-user-enter-password...

>> ) >> >> https://cinelerra-gg.org/download/CinelerraGG_Manual/Menu_Bar_Shell_Commands... >> >> if we develop it into being even relatively distro-agnostic and >> error-proof it hopefully can be included into future versions of CinGG >> >> making mpeg2 hdv compatible _encoding_ profile is also on table, I >> think ... (this one can be integrated at Blu-ray specific menu >> choice, because I put some lines of code in there for supporting pcm >> audio on h264 encoded BD) >> >> >> I also found some remaints of direct-copy 'smart-render-like' feature >> in Cinelerra-CV's libquicktime: >> >> https://github.com/cinelerra-cv-team/cinelerra-cv/blob/954a91e72bba1ed1ce641... >> >> around line 730 but it was only working (apparently) with some mpeg4 >> _divx_ movs, not mpeg2s. >> >> developing mpeg direct-copy routines remained big TODO item. I look >> at related code from time to time but no promises, sadly. >> >> > > I just add my extracted notes and urls about Smart rendering HDV in > Vegas, Premiere Pro: > > What is smart rendering? > Smart Render *analyzes a video for any previously rendered sections > and renders only the new or revised sections*. This can reduce > rendering time significantly. Corel VideoStudio's SmartRender feature > makes previewing and creating movies a lot faster. > > >   How To Enable Smart Render > > You can enable smart render with video editing software like > VideoStudio. Follow along with our tutorial below to learn the easiest > way to enable smart render. Rendering can take an enormous amount of > time in video editing, especially when the video is long and includes > a large number of effects. VideoStudio has implemented a smart render > system to speed that process up and only render the parts of the film > that need rendering. Read on to find out how it works. > > Smart Render analyzes a video for any previously rendered sections and > renders only the new or revised sections. This can reduce rendering > time significantly. > > Corel VideoStudio’s SmartRender feature makes previewing and creating > movies a lot faster. When you preview your video project for the first > time, VideoStudio ‘renders’ the project by creating a temporary > preview file on your hard drive which combines the video, image, and > audio clips with the special effects which you applied to them. The > SmartRender feature detects any changes in your project and if there > are no changes, instantly plays back the preview file. If there are > changes (for instance, when titles, video filters or transition > effects have been added), it renders out only the edited portions, > making render times much shorter and faster. > > > https://www.vegascreativesoftware.info/us/forum/hdv-smart-rendering-and-bada... > https://www.dvinfo.net/forum/archive/index.php/t-116464.html > > https://helpx.adobe.com/premiere-pro/using/smart-rendering.html > > https://larryjordan.com/articles/premiere-pro-export-faster-with-smart-rende... > > https://workflow.frame.io/guide/smart-rendering > > https://blog.frame.io/2021/06/07/premiere-pro-max-render-quality-max-bit-dep... > > https://www.kevinmonahan.net/?p=88 > > > >> >> >> >> >> >> >>     After all, Blu-ray images on BD-R/RE discs and possible simpler >>     DVD-R/RW discs for exchange, are more reliable and playable >>     backups for video on tape or HDD. >> >> >> >> >> >> >>> >>> >>> >>> >>> >>> >>> >>> >>>         > >>>         > >>>         > >>>         >     Den 12.11.2022 16:36, skrev Andrew Randrianasulu: >>>         >     > >>>         >     > >>>         >     > сб, 12 нояб. 2022 г., 18:30 Terje J. Hanssen >>>         >     <[email protected]> >>>         <mailto:[email protected]>: >>>         >     > >>>         > >>>         >     >     "Finally home again", just to discover that I >>>         have not >>>         >     'bdwrite' available on my workstations upgraded with >>>         the latest >>>         >     31. Oct 2022 CinGG appimages. >>>         >     >     Therefore I wonder if CinGG Appimage not provide >>>         and make it >>>         >     possible to run bdwrite from command line (similar >>>         like no ffmpeg) >>>         >     without a single user build? >>>         >     > >>>         >     > >>>         >     > I think you can unpack/mount appimages . >>>         >     > >>>         >     > >>>         > >>> https://docs.appimage.org/user-guide/run-appimages.html#mount-an-appimage >>>         >     > >>>         >     > then you hopefully will find bdwrite inside .... >>>         >     > >>>         >     > or slightly down this question  documentation said >>>         you can >>>         >     extract content of appimage into directory. So, if bdwrite >>>         >     actually there you can run it from there or copy it to >>>         some place >>>         >     > >>>         > >>>         > >>>         >     1) >>>         >     First attempt as Type 1 appimage: >>>         > >>>         >     terje@localhost:~> sudo mount >>>         >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >>>         >     /home/terje/mountpoint/ >>>         > >>>         >     [sudo] passord for root: >>>         >     mount: /home/terje/mountpoint: wrong fs type, bad >>>         option, bad >>>         >     superblock on /dev/loop0, missing codepage or helper >>>         program, or >>>         >     other error. >>>         > >>>         >     terje@localhost:~> umount /home/terje/mountpoint/ >>>         >     umount: /home/terje/mountpoint: not mounted. >>>         > >>>         > >>>         >     2) >>>         >     Second attempt as Type 2 appimage: >>>         > >>>         >     terje@localhost:~> >>>         >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >>>         >     --appimage-offset >>>         > >>>         >     but why all these warnings and failed messages? >>>         >     ---------- >>>         > >>>         >     /usr/bin/AppImageLauncher: /usr/lib64/libcurl.so.4: no >>>         version >>>         >     information available (required by >>>         > >>>   /usr/bin/../lib/x86_64-linux-gnu/appimagelauncher/libappimageupdate.so) >>>         >     Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use >>>         >     QT_QPA_PLATFORM=wayland to run on Wayland anyway. >>>         > >>>         >     ** (AppImageLauncher:7534): WARNING **: 17:40:13.433: >>>         Pixbuf >>>         >     theme: Cannot load pixmap file >>>         > >>>   /usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png: >>>         >     Feil under lasting av bilde >>>         > >>>   «/usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png»: >>>         >     Fatal feil i PNG-bildefil: bad parameters to zlib >>>         > >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_width: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     ** (AppImageLauncher:7534): WARNING **: 17:40:13.433: >>>         Invalid >>>         >     borders specified for theme pixmap: >>>         > >>>   /usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png, >>>         >     borders don't fit within the image >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >>>         'GDK_IS_PIXBUF >>>         >     (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >>>         'GDK_IS_PIXBUF >>>         >     (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >>>         'GDK_IS_PIXBUF >>>         >     (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >>>         'GDK_IS_PIXBUF >>>         >     (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >>>         'GDK_IS_PIXBUF >>>         >     (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >>>         'GDK_IS_PIXBUF >>>         >     (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >>>         'GDK_IS_PIXBUF >>>         >     (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >>>         'GDK_IS_PIXBUF >>>         >     (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >>>         'GDK_IS_PIXBUF >>>         >     (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_width: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         > >>>         >     (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >>>         17:40:13.433: >>>         >     gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF >>>         (pixbuf)' failed >>>         >     189632 >>>         >     ---------------- >>>         > >>>         > >>>         >     terje@localhost:~> sudo mount >>>         >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >>>         >     /home/terje/mountpoint/ -o offset=189632 >>>         >     [sudo] passord for root: >>>         > >>>         >     terje@localhost:~> cd mountpoint >>>         >  terje@localhost:~/mountpoint> ls >>>         >     AppRun  cin.desktop cin.svg  usr >>>         >  terje@localhost:~/mountpoint> ls -la >>>         >     totalt 40 >>>         >     drwxr-xr-x   3 root  root 102 okt.  31 15:24 . >>>         >     drwxr-xr-x 124 terje users 36864 nov.  12 17:31 .. >>>         >     lrwxrwxrwx   1 root root     11 okt.  31 15:24 AppRun >>>         -> usr/bin/cin >>>         >     lrwxrwxrwx   1 root root     34 okt.  31 15:24 >>>         cin.desktop -> >>>         >  usr/share/applications/cin.desktop >>>         >     lrwxrwxrwx   1 root root     45 okt.  31 15:24 cin.svg -> >>>         >  usr/share/icons/hicolor/scalable/apps/cin.svg >>>         >     lrwxrwxrwx   1 root root      7 okt.  31 15:24 >>>         .DirIcon -> cin.svg >>>         >     drwxr-xr-x   5 root root     62 okt.  31 15:23 usr >>>         > >>>         >  terje@localhost:~/mountpoint> find . -name bdwrite >>>         >     ./usr/bin/bdwrite >>>         > >>>         >  terje@localhost:~/mountpoint> stat ./usr/bin/bdwrite >>>         >       Fil: ./usr/bin/bdwrite >>>         >       Størrelse: 35940792 [tab]Blokker: 70197      IO >>>         Blokk: 1024 >>>         >     vanlig fil >>>         >     Enhet: 700h/1792d Datanode: 12          Lenker: 1 >>>         >     Tilgang: (0755/-rwxr-xr-x) Uid: (    0/    root) Gid: >>>         (    0/ >>>         >     root) >>>         >     Tilgang: 2022-10-31 15:23:57.000000000 +0100 >>>         >     Omgjøring: 2022-10-31 15:23:57.000000000 +0100 >>>         >     Endring: 2022-10-31 15:23:57.000000000 +0100 >>>         >      Fødsel: - >>>         > >>>         >  terje@localhost:~/mountpoint> which bdwrite >>>         >     which: no bdwrite in >>>  (/home/terje/bin:/usr/local/bin:/usr/bin:/bin) >>>         > >>>         >     Copied the mounted bdwrite to /usr/bin: >>>         > >>>         >  terje@localhost:~/mountpoint> sudo cp >>>         ./usr/bin/bdwrite /usr/bin >>>         >     [sudo] passord for root: >>>         >  terje@localhost:~/mountpoint> ls -la /usr/bin/bdwrite >>>         >     -rwxr-xr-x 1 root root 35940792 nov.  12 18:00 >>>         /usr/bin/bdwrite >>>         > >>>         >     ============= >>>         > >>>         >     3) >>>         >     Tried the extracted bdwrite with a hdv-file transcoded >>>         to Blu-ray >>>         >     pcm_bluray audio and mts stream >>>         > >>>         >     localhost:~ # cd /home/terje/Videoklipp >>>         >  localhost:/home/terje/Videoklipp # ls -1 *.mts >>>         >     2008_m2t-ac3.mts >>>         >     2008_m2t_pcm_bluray.mts >>>         >     hdv01_05_m2t_pcm_bluray.mts >>>         >     hdv01_m2t_pcm_bluray.mts >>>         >     hdv_iLink_m2t_pcm_bluray.mts >>>         > >>>         > >>>         >  localhost:/home/terje/Videoklipp # ffprobe -hide_banner >>>         >     2008_m2t_pcm_bluray.mts >>>         >     Input #0, mpegts, from '2008_m2t_pcm_bluray.mts': >>>         >       Duration: 00:00:13.44, start: 1.440000, bitrate: >>>         27988 kb/s >>>         >       Program 1 >>>         >         Metadata: >>>         >           service_name    : Service01 >>>         >           service_provider: FFmpeg >>>         >       Stream #0:0[0x1011]: Video: mpeg2video (Main) >>>         ([2][0][0][0] / >>>         >     0x0002), yuv420p(tv, bt709, top first), 1440x1080 [SAR >>>         4:3 DAR >>>         >     16:9], 25000 kb/s, 25 fps, 25 tbr, 90k tbn >>>         >         Side data: >>>         >           cpb: bitrate max/min/avg: 25000000/0/0 buffer >>>         size: 7340032 >>>         >     vbv_delay: N/A >>>         >       Stream #0:1[0x1100]: Audio: pcm_bluray ([128][0][0][0] / >>>         >     0x0080), 48000 Hz, stereo, s16, 1536 kb/s >>>         >  localhost:/home/terje/Videoklipp # du -sb *.mts >>>         >     43333624 2008_m2t-ac3.mts >>>         >     47020032 2008_m2t_pcm_bluray.mts >>>         >     1603362816 hdv01_05_m2t_pcm_bluray.mts >>>         >     2299017216 hdv01_m2t_pcm_bluray.mts >>>         >     399237120 hdv_iLink_m2t_pcm_bluray.mts >>>         > >>>         > >>>         >  localhost:/home/terje/Videoklipp # ls -la >>>         2008_m2t_pcm_bluray.mts >>>         >     -rw-r--r-- 1 terje users 47020032 Nov 11 22:06 >>>         2008_m2t_pcm_bluray.mts >>>         > >>>         > >>>         >  localhost:/home/terje/Videoklipp # mkudffs -b 2048 >>>         >     /tmp/newfilename.udfs 27055 >>>         >  filename=/tmp/newfilename.udfs >>>         >     label=LinuxUDF >>>         >     uuid=636fdd9d0eee73bf >>>         >     blocksize=2048 >>>         >     blocks=27055 >>>         >     udfrev=201 >>>         >     start=0, blocks=16, type=RESERVED >>>         >     start=16, blocks=3, type=VRS >>>         >     start=19, blocks=237, type=USPACE >>>         >     start=256, blocks=1, type=ANCHOR >>>         >     start=257, blocks=16, type=PVDS >>>         >     start=273, blocks=1, type=LVID >>>         >     start=274, blocks=26524, type=PSPACE >>>         >     start=26798, blocks=1, type=ANCHOR >>>         >     start=26799, blocks=239, type=USPACE >>>         >     start=27038, blocks=16, type=RVDS >>>         >     start=27054, blocks=1, type=ANCHOR >>>         > >>>         > >>>         >  localhost:/home/terje/Videoklipp # mount -o loop >>>         >     /tmp/newfilename.udfs /mnt/test >>>         > >>>         >  localhost:/home/terje/Videoklipp # bdwrite /mnt/test >>>         >     2008_m2t_pcm_bluray.mts >>>         > >>>         >     but got an error message: >>>         > >>>         >     bdwrite: error while loading shared libraries: >>>         >     libIlmImf-2_3.so.24: cannot open shared object file: >>>         No such file >>>         >     or directory >>>         > >>>         > >>> >> >

Den 24.11.2022 19:35, skrev Andrew Randrianasulu:

чт, 24 нояб. 2022 г., 21:05 Terje J. Hanssen <[email protected]>:

Den 24.11.2022 02:34, skrev Andrew Randrianasulu: > > > ср, 23 нояб. 2022 г., 23:27 Terje J. Hanssen <[email protected]>: > > > >     Den 22.11.2022 21:50, skrev Terje J. Hanssen: >     > >     > >     > Den 22.11.2022 18:21, skrev Andrew Randrianasulu: >     >> >     >> >     >> вт, 22 нояб. 2022 г., 19:53 Terje J. Hanssen >     <[email protected]>: >     >> >     >> >     >> >     >>     Den 22.11.2022 16:30, skrev Andrew Randrianasulu: >     >>> >     >>> >     >>>     вт, 22 нояб. 2022 г., 00:20 Terje J. Hanssen >     >>>     <[email protected]>: >     >>> >     >>> >     >>> >     >>>         Den 13.11.2022 00:07, skrev Andrew Randrianasulu: >     >>>         > >     >>>         > >     >>>         > сб, 12 нояб. 2022 г., 21:43 Terje J. Hanssen >     >>>         <[email protected]>: >     >>>         > >     >>>         >     Derived from another thread "HDV files at > archive.org <http://archive.org> <http://archive.org> >     >>>         <http://archive.org> >     >>>         >     <http://archive.org>" I extract and continue this >     >>>         topic in a new >     >>>         >     thread here. >     >>>         >     And if this isn't documented yet, I suggest some >     with >     >>>         knowledge to >     >>>         >     setup a Readme and manual section for this. >     >>>         > >     >>>         > >     >>>         > >     >>>         > >     >>>         > already there >     >>>         > >     >>>         > >     >>> > https://cinelerra-gg.org/download/CinelerraGG_Manual/Managing_AppImage.html#... >     >>>         > >     >>>         I think I didn't recognized this section equivalent to the >     >>>         appimage >     >>>         user-guide section. >     >>> >     >>>         > >     >>>         > try to just unpack appimage and then set >     >>>         > >     >>>         > export LD_LIBRARY_PATH=$BCASTDIR:$LD_LIBRARY_PATH >     >>>         > >     >>>         > where $BCASTDIR points at unpacked/mounted >     appimages's usr/lib >     >>>         > >     >>>         > before running bdwrite >     >>>         > >     >>> >     >>>         While waiting for my ordered BD-R/RE discs, I have tried >     >>>         again and >     >>>         attach the new terminal output with comments as follows: >     >>> >     >>>  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >     >>>         --appimage-offset >     >>>         (AppImageLauncher:16794): GdkPixbuf-CRITICAL **: >     20:50:50.433: >     >>>         gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF >     (pixbuf)' failed >     >>>         189632 >     >>> >     >>>         sudo mount >     >>>  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >     >>>         /home/terje/mountpoint/ -o offset=189632 >     >>>         [sudo] passord for root: >     >>> >     >>> >     >>>         find /home/terje/mountpoint -name lib >     >>>  /home/terje/mountpoint/usr/lib >     >>> >     >>>         export >     >>>  LD_LIBRARY_PATH=/home/terje/mountpoint/usr/lib:$LD_LIBRARY_PATH >     >>> >     >>>         ls -la 2008_m2t_pcm_bluray.mts >     >>>         -rw-r--r-- 1 terje users 47020032 Nov 11 22:06 >     >>>         2008_m2t_pcm_bluray.mts >     >>> >     >>> >     >>>         mkudffs -b 2048 /tmp/newfilename.udfs 27055 >     >>>  filename=/tmp/newfilename.udfs >     >>>         label=LinuxUDF >     >>>         uuid=637bd9b8ea861ad7 >     >>>         blocksize=2048 >     >>>         blocks=27055 >     >>>         udfrev=201 >     >>>         start=0, blocks=16, type=RESERVED >     >>>         start=16, blocks=3, type=VRS >     >>>         start=19, blocks=237, type=USPACE >     >>>         start=256, blocks=1, type=ANCHOR >     >>>         start=257, blocks=16, type=PVDS >     >>>         start=273, blocks=1, type=LVID >     >>>         start=274, blocks=26524, type=PSPACE >     >>>         start=26798, blocks=1, type=ANCHOR >     >>>         start=26799, blocks=239, type=USPACE >     >>>         start=27038, blocks=16, type=RVDS >     >>>         start=27054, blocks=1, type=ANCHOR >     >>> >     >>>         mount -o loop /tmp/newfilename.udfs /mnt/test >     >>> >     >>>         find /home/terje/mountpoint -name bdwrite >     >>>  /home/terje/mountpoint/usr/bin/bdwrite >     >>> >     >>>  /home/terje/mountpoint/usr/bin/bdwrite /mnt/test >     >>>         2008_m2t_pcm_bluray.mts >     >>> >     >>>         No interlace error ! >     >>>         -------------------- >     >>> >     >>>         ls /mnt/test >     >>>         BDMV  CERTIFICATE >     >>> >     >>>         tree -h /mnt/test/BDMV >     >>>         /mnt/test/BDMV >     >>>         ├── [  40]  AUXDATA >     >>>         ├── [ 332]  BACKUP >     >>>         │   ├── [  40]  BDJO >     >>>         │   ├── [  92]  CLIPINF >     >>>         │   │   └── [ 480] 00000.clpi >     >>>         │   ├── [  40]  JAR >     >>>         │   ├── [ 110] MovieObject.bdmv >     >>>         │   ├── [  92]  PLAYLIST >     >>>         │   │   └── [ 184] 00000.mpls >     >>>         │   └── [ 124]  index.bdmv >     >>>         ├── [  40]  BDJO >     >>>         ├── [  92]  CLIPINF >     >>>         │   └── [ 480]  00000.clpi >     >>>         ├── [  40]  JAR >     >>>         ├── [  40]  META >     >>>         ├── [ 110]  MovieObject.bdmv >     >>>         ├── [  92]  PLAYLIST >     >>>         │   └── [ 184]  00000.mpls >     >>>         ├── [  92]  STREAM >     >>>         │   └── [ 45M]  00000.m2ts >     >>>         └── [ 124]  index.bdmv >     >>> >     >>>         12 directories, 9 files >     >>> >     >>>  --------------------------------------- >     >>> >     >>>         Finally 9 files and [ 45M] 00000.m2ts >     >>> >     >>>         I was able to open /mnt/test/BDMV with VLC and playback >     >>>         video and >     >>>         pcm_bluray video OK >     >>> >     >>>  ------------------------------------------------------ >     >>>         but not with mplayer as follows: >     >>> >     >>> >     >>>         umount /mnt/test >     >>> >     >>>         which mplayer >     >>>         /usr/bin/mplayer >     >>> >     >>>         mplayer -vo null br://tmp/newfilename.udfs >     >>>         Creating config file: /root/.mplayer/config >     >>>         MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team >     >>>         do_connect: could not connect to socket >     >>>         connect: No such file or directory >     >>>         Failed to open LIRC support. You will not be able to use >     >>>         your remote >     >>>         control. >     >>> >     >>>         Playing br://tmp/newfilename.udfs. >     >>>         The hostname option must be an integer: tmp >     >>>         Struct bluray, field hostname parsing error: tmp >     >>>         disc.c:333: failed opening UDF image newfilename.udfs >     >>>         disc.c:437: error opening file BDMV/index.bdmv >     >>>         disc.c:437: error opening file BDMV/BACKUP/index.bdmv >     >>>         bluray.c:2646: nav_get_title_list(newfilename.udfs/) >     failed >     >>>         Couldn't open Blu-ray device: newfilename.udfs >     >>>         No stream found to handle url br://tmp/newfilename.udfs >     >>> >     >>> >     >>>         Exiting... (End of file) >     >>> >     >>> >     >>> >     >>>     mplayer works for me if I start it from /tmp (where test >     file is >     >>>     located) >     >> >     >>     I will try also that next. >     >> > >     =============================== >     23/11-22 >     =============================== > >     mplayer continued > >     -- sorry, the following long output as root, seems like lack og audio >     config and other errors? > > > yeah ... but again, you can try to make this udfs file readable for > usual user and try again ... > > anyway, I historically used mplayer because it was faster to build and > rebuild afresh, compared to vlc with million deps. If it works in VLC > - I think you can try and move into experiments with longer files. >

============================

24/11-22

Testing playback with VLC and Mplayer as user on (mounted) /tmp/test/BDMV and on (unmounted) /tmp/newfilename.udfs

=============================

VlC as user playbacks video and audio OK recursively from (mounted) /mnt/test/BDMV, but with some failed messages:

terje@localhost:~> vlc /mnt/test/BDMV VLC media player 3.0.17.3 Vetinari (revision 3.0.13-8-g41878ff4f2) libdvdread: Encrypted DVD support unavailable. libdvdread: Couldn't find device name. [000055828618fd30] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway. libdvdread: Encrypted DVD support unavailable. libdvdread: Couldn't find device name. libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. [00007f2208001160] dvdnav demux error: vm: vm: failed to read VIDEO_TS.IFO libdvdread: Encrypted DVD support unavailable. libdvdread: Couldn't find device name. libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. libdvdread: Encrypted DVD support unavailable. libdvdread: Couldn't find device name. libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. libdvdread: Encrypted DVD support unavailable. libdvdread: Couldn't find device name. libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. ................... [00007f2260004030] dvdnav demux error: vm: vm: failed to read VIDEO_TS.IFO libdvdread: Encrypted DVD support unavailable. libdvdread: Couldn't find device name. libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdread:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. [00007f226000b8f0] dvdnav demux error: vm: vm: failed to read VIDEO_TS.IFO [00007f2204008cc0] gl gl: Initialized libplacebo v4.192.1 (API v192) [00007f2204008cc0] gl gl: Initialized libplacebo v4.192.1 (API v192) Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: Ingen slik fil eller filkatalog [00007f220505f950] gl gl: Initialized libplacebo v4.192.1 (API v192) QObject::~QObject: Timers cannot be stopped from another thread

=============================

Mplayer as user doesn't playback/find audio and video with just path to /mnt/test/BDMV

Mplayer as user playback audio an video just with full path to /mnt/test/BDMV/STREAM/00000.m2ts --------------

terje@localhost:~> mplayer /mnt/test/BDMV/STREAM/00000.m2ts MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control.

Playing /mnt/test/BDMV/STREAM/00000.m2ts. libavformat version 58.76.100 (external) TS file format detected. VIDEO MPEG2(pid=4113) AUDIO PCMBR(pid=4352) NO SUBS (yet)!  PROGRAM N. 1 VIDEO:  MPEG2  1440x1080  (aspect 3)  25.000 fps  25000.0 kbps (3125.0 kbyte/s) X11 error: BadMatch (invalid parameter attributes) [VO_XV] It seems there is no Xvideo support for your video card available. [VO_XV] Run 'xvinfo' to verify its Xv support and read [VO_XV] DOCS/HTML/en/video.html#xv! [VO_XV] See 'mplayer -vo help' for other (non-xv) video out drivers. [VO_XV] Try -vo x11. ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 58.134.100 (external) [mpeg2video @ 0x7fb394081560]Requested frame threading with a custom get_buffer2() implementation which is not marked as thread safe. This is not supported anymore, make your callback thread-safe. Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2) ========================================================================== Load subtitles in /mnt/test/BDMV/STREAM/ ========================================================================== Trying to force audio codec driver family libmad... Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000) Selected audio codec: [fflpcm] afm: ffmpeg (Blu-ray LPCM) ========================================================================== AO: [pulse] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... Bad stream state, please report as bug! Movie-Aspect is undefined - no prescaling applied. VO: [x11] 1440x1080 => 1440x1080 Planar YV12  [zoom] [swscaler @ 0x7fb39a79c0e0]bicubic scaler, from yuv420p to bgra using MMXEXT [swscaler @ 0x7fb39a79c0e0]using unscaled yuv420p -> bgra special converter Bad stream state, please report as bug! Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [x11] 1440x1080 => 1920x1080 Planar YV12  [zoom] A:   1.5 V:   1.4 A-V:  0.106 ct:  0.000   2/  2 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.5 V:   1.5 A-V:  0.068 ct: -0.000   3/  3 ??% ??% ??,?% 1 0 Bad stream state, please repo ..................snip Bad stream state, please report as bug! A:  14.7 V:  14.7 A-V:  0.016 ct:  0.002 333/333 12% 20% 0.8% 1 0 Bad stream state, please report as bug! A:  14.7 V:  14.7 A-V:  0.006 ct:  0.002 334/334 12% 20% 0.8% 1 0 Bad stream state, please report as bug! A:  14.8 V:  14.8 A-V:  0.079 ct:  0.110 335/335 12% 20% 0.8% 1 0

Exiting... (End of file)

#############################

I'm a bit confused and would like to get clarified what really happends when/after entering "umount /mnt/test"? That is the difference between using /tmp/test and /tmp/newfilename.udf

well, with file still mounted to some directory you basically use kernel's udf implementation for getting blocks corresponding to this ts file in order ...

when you unmount it players must figure out filesystem inside file themselves.

Just to add, right-click /tmp/newfilename.udf using Gnome File manager>Property, it is recognized of Type: Binary file (application/octet-stream) At first there was no Program set to open this file type, but set it to open with VLC and got sucessful playback of video and audio. Tried the same with Mplayer, which just loaded its gui interface with no playback. (there is no problem to playback hdv.m2t files directly). So far, VLC looks to work most robust for my playback, and I continue therefor with VLC Next, I continue with a separate thread (as the current has become more than long enough), trying to test burning images to a new type BD-RE/DL 50GB discs (first).

=======================

VlC as user playbacks video and audio OK from newfilename.udfs ------------------

terje@localhost:/tmp> vlc VLC media player 3.0.17.3 Vetinari (revision 3.0.13-8-g41878ff4f2) [00005643603ead30] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway. [00007fd4a0001170] libbluray demux: First play: 1, Top menu: 1 HDMV Titles: 1, BD-J Titles: 0, Other: 0 [00007fd4a0001170] libbluray demux: Adding ES 4113 select 1 [00007fd4a0001170] libbluray demux: Adding ES 4352 select 1 [00007fd48c007260] gl gl: Initialized libplacebo v4.192.1 (API v192) [00007fd48c007260] gl gl: Initialized libplacebo v4.192.1 (API v192) Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: Ingen slik fil eller filkatalog [00007fd48d016510] gl gl: Initialized libplacebo v4.192.1 (API v192) hdmv_vm.c:450: _resume_from_play_pl(): object not playing playlist ! hdmv_vm.c:450: _resume_from_play_pl(): object not playing playlist ! hdmv_vm.c:450: _resume_from_play_pl(): object not playing playlist ! hdmv_vm.c:450: _resume_from_play_pl(): object not playing playlist ! [00007f9c84001170] libbluray demux: Closing overlays. QObject::~QObject: Timers cannot be stopped from another thread

#####################

Mplayer as user playback only Audio from /tmp/newfilename.udfs

remove -vo null  (you can try -vo help for list of video output methods, same for audio with -ao help. you can put your preferences in .mplayer/config later) or check if your user can connect to X server from given terminal (emulator).

I managed to kill my access by deleting .Xauthority file while trying to figure why ssh -X was not working ...

thankfully it was recreated automatically after I killed X and restarted them again ....

----------------------- terje@localhost:/tmp> mplayer -vo null br://tmp/newfilename.udfs MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control.

Playing br://tmp/newfilename.udfs. The hostname option must be an integer: tmp Struct bluray, field hostname parsing error: tmp libavformat version 58.76.100 (external) bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. TS file format detected. bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. VIDEO MPEG2(pid=4113) AUDIO PCMBR(pid=4352) NO SUBS (yet)!  PROGRAM N. 1 bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. VIDEO:  MPEG2  1440x1080  (aspect 3)  25.000 fps  25000.0 kbps (3125.0 kbyte/s) ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 58.134.100 (external) [mpeg2video @ 0x7f3dc0bf3560]Requested frame threading with a custom get_buffer2() implementation which is not marked as thread safe. This is not supported anymore, make your callback thread-safe. Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2) ========================================================================== ========================================================================== Trying to force audio codec driver family libmad... Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000) Selected audio codec: [fflpcm] afm: ffmpeg (Blu-ray LPCM) terje@localhost:/tmp> mplayer -vo null br://tmp/newfilename.udfs MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control.

Playing br://tmp/newfilename.udfs. The hostname option must be an integer: tmp Struct bluray, field hostname parsing error: tmp libavformat version 58.76.100 (external) bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. TS file format detected. bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. VIDEO MPEG2(pid=4113) AUDIO PCMBR(pid=4352) NO SUBS (yet)!  PROGRAM N. 1 bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip 66600-667800. VIDEO:  MPEG2  1440x1080  (aspect 3)  25.000 fps  25000.0 kbps (3125.0 kbyte/s) ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 58.134.100 (external) [mpeg2video @ 0x7fbf5abde560]Requested frame threading with a custom get_buffer2() implementation which is not marked as thread safe. This is not supported anymore, make your callback thread-safe. Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2) ========================================================================== ========================================================================== Trying to force audio codec driver family libmad... Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000) Selected audio codec: [fflpcm] afm: ffmpeg (Blu-ray LPCM) ========================================================================== AO: [pulse] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... Bad stream state, please report as bug! Movie-Aspect is undefined - no prescaling applied. VO: [null] 1440x1080 => 1440x1080 Planar YV12  [zoom] Bad stream state, please report as bug! Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [null] 1440x1080 => 1920x1080 Planar YV12  [zoom] A:   1.5 V:   1.4 A-V:  0.084 ct:  0.000   2/  2 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.5 V:   1.5 A-V:  0.052 ct:  0.004   3/  3 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.6 V:   1.5 A-V:  0.044 ct:  0.008   4/  4 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.6 V:   1.6 A-V:  0.032 ct:  0.011   5/  5 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.6 V:   1.6 A-V:  0.029 ct:  0.014   6/  6 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.7 V:   1.6 A-V:  0.026 ct:  0.016   7/  7 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.7 V:   1.7 A-V:  0.023 ct:  0.019   8/  8 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.7 V:   1.7 A-V:  0.021 ct:  0.021   9/  9 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.8 V:   1.8 A-V:  0.019 ct:  0.022  10/ 10 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.8 V:   1.8 A-V:  0.017 ct:  0.024  11/ 11 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! A:   1.9 V:   1.8 A-V:  0.016 ct:  0.026  12/ 12 ??% ??% ??,?% 0 0 Bad stream state, please report as bug! ........snip Bad stream state, please report as bug! A:  14.7 V:  14.7 A-V:  0.000 ct:  0.040 333/333 10%  0% 0.4% 0 0 Bad stream state, please report as bug! A:  14.7 V:  14.7 A-V:  0.000 ct:  0.040 334/334 10%  0% 0.4% 0 0 Bad stream state, please report as bug! A:  14.7 V:  14.8 A-V: -0.027 ct:  0.132 335/335 10%  0% 0.4% 0 0

Exiting... (End of file)

================================

> > > >     localhost:~ # cd /tmp >     localhost:/tmp # mplayer -vo null br://tmp/newfilename.udfs >     MPlayer 1.2.r38304-Packman-7 (C) 2000-2021 MPlayer Team >     do_connect: could not connect to socket >     connect: No such file or directory >     Failed to open LIRC support. You will not be able to use your remote >     control. > >     Playing br://tmp/newfilename.udfs. >     The hostname option must be an integer: tmp >     Struct bluray, field hostname parsing error: tmp >     libavformat version 58.76.100 (external) >     bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip >     66600-667800. >     bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip >     66600-667800. >     TS file format detected. >     bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip >     66600-667800. >     VIDEO MPEG2(pid=4113) AUDIO PCMBR(pid=4352) NO SUBS (yet)! >     PROGRAM N. 1 >     bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip >     66600-667800. >     VIDEO:  MPEG2  1440x1080  (aspect 3)  25.000 fps 25000.0 kbps >     (3125.0 >     kbyte/s) >  ========================================================================== >     Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family >     libavcodec version 58.134.100 (external) >     [mpeg2video @ 0x7fd57c9aa560]Requested frame threading with a custom >     get_buffer2() implementation which is not marked as thread safe. >     This is >     not supported anymore, make your callback thread-safe. >     Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2) >  ========================================================================== >  ========================================================================== >     Trying to force audio codec driver family libmad... >     Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders >     AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: >     192000->192000) >     Selected audio codec: [fflpcm] afm: ffmpeg (Blu-ray LPCM) >  ========================================================================== >     AO: [pulse] Init failed: Connection refused >     Failed to initialize audio driver 'pulse' >     [AO_ALSA] alsa-lib: pulse.c:243:(pulse_connect) PulseAudio: Unable to >     connect: Connection refused > >     [AO_ALSA] Playback open error: Connection refused >     Failed to initialize audio driver 'alsa' >     [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such >     file or >     directory >     Failed to initialize audio driver 'oss' >     No such audio driver 'esd' >     No such audio driver 'arts' >     [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such >     file or >     directory >     [AO_ALSA] alsa-lib: pulse.c:243:(pulse_connect) PulseAudio: Unable to >     connect: Connection refused > >     [AO_ALSA] Playback open error: Connection refused >     AO: [pulse] Init failed: Connection refused >     Cannot connect to server socket err = No such file or directory >     Cannot connect to server request channel >     jack server is not running or cannot be started >     JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, >     skipping unlock >     JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, >     skipping unlock >     [JACK] cannot open server >     [AO SDL] Samplerate: 48000Hz Channels: Stereo Format s16le >     [AO_ALSA] alsa-lib: pulse.c:243:(pulse_connect) PulseAudio: Unable to >     connect: Connection refused > >     [AO SDL] Unable to open audio: No available audio device >     DVB card number must be between 1 and 4 >     AO: [null] 48000Hz 2ch s16le (2 bytes per sample) >     Starting playback... >     Bad stream state, please report as bug! >     Movie-Aspect is undefined - no prescaling applied. >     VO: [null] 1440x1080 => 1440x1080 Planar YV12 [zoom] >     Bad stream state, please report as bug! >     Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. >     VO: [null] 1440x1080 => 1920x1080 Planar YV12 [zoom] >     A:   1.5 V:   1.4 A-V:  0.054 ct:  0.000   2/  2 ??% ??% ??,?% 0 0 >     Bad stream state, please report as bug! >     .....snip >     ........... > >     Bad stream state, please report as bug! >     A:  14.7 V:  14.7 A-V: -0.000 ct:  0.040 334/334 10%  0% 0.7% 0 0 >     Bad stream state, please report as bug! >     A:  14.8 V:  14.8 A-V:  0.080 ct:  0.148 335/335 10%  0% 0.7% 0 0 > > >     Exiting... (End of file) > >     ========================== > > > > >     >>     But thinking more about this topic that has several cumbersome >     >>     and error-phrone manual steps. Appimage has even complicated >     >>     these, not at least for occasionally users. >     >>     Therefore I will throw in the following suggestion or RFE: >     >> >     >>     Will it be possible or manageable to integrate and run the >     >>     bundled 'bdwrite' to Bluray within the Cin-GG's run-time >     environment? >     >>     I.e we now has File > BD render (and DVD render). What to add >     >>     File > "BD Write" and get sub-window with options to select >     >>     HDV/mpeg2 without re-encoding (compression loss) of video from >     >>     HDD file, select re-encoding of the MP2 audio to AC3 or PCM for >     >>     Blu-ray etc. >     >> >     >> >     >> >     >> >     >> may be try to encapsulate manual steps into bash script and >     then run >     >> this script from shell commands system? (not sure how to handle >     sudo >     >> password entering .... xdialog conditional on X DISPLAY >     variable? ah >     >> someone suggested 'sudo -A' and custom script >     >> > https://askubuntu.com/questions/314395/proper-way-to-let-user-enter-password... > >     >> ) >     >> >     >> > https://cinelerra-gg.org/download/CinelerraGG_Manual/Menu_Bar_Shell_Commands... >     >> >     >> if we develop it into being even relatively distro-agnostic and >     >> error-proof it hopefully can be included into future versions >     of CinGG >     >> >     >> making mpeg2 hdv compatible _encoding_ profile is also on table, I >     >> think ... (this one can be integrated at Blu-ray specific menu >     >> choice, because I put some lines of code in there for >     supporting pcm >     >> audio on h264 encoded BD) >     >> >     >> >     >> I also found some remaints of direct-copy 'smart-render-like' >     feature >     >> in Cinelerra-CV's libquicktime: >     >> >     >> > https://github.com/cinelerra-cv-team/cinelerra-cv/blob/954a91e72bba1ed1ce641... >     >> >     >> around line 730 but it was only working (apparently) with some >     mpeg4 >     >> _divx_ movs, not mpeg2s. >     >> >     >> developing mpeg direct-copy routines remained big TODO item. I >     look >     >> at related code from time to time but no promises, sadly. >     >> >     >> >     > >     > I just add my extracted notes and urls about Smart rendering HDV in >     > Vegas, Premiere Pro: >     > >     > What is smart rendering? >     > Smart Render *analyzes a video for any previously rendered sections >     > and renders only the new or revised sections*. This can reduce >     > rendering time significantly. Corel VideoStudio's SmartRender >     feature >     > makes previewing and creating movies a lot faster. >     > >     > >     >   How To Enable Smart Render >     > >     > You can enable smart render with video editing software like >     > VideoStudio. Follow along with our tutorial below to learn the >     easiest >     > way to enable smart render. Rendering can take an enormous >     amount of >     > time in video editing, especially when the video is long and >     includes >     > a large number of effects. VideoStudio has implemented a smart >     render >     > system to speed that process up and only render the parts of the >     film >     > that need rendering. Read on to find out how it works. >     > >     > Smart Render analyzes a video for any previously rendered >     sections and >     > renders only the new or revised sections. This can reduce rendering >     > time significantly. >     > >     > Corel VideoStudio’s SmartRender feature makes previewing and >     creating >     > movies a lot faster. When you preview your video project for the >     first >     > time, VideoStudio ‘renders’ the project by creating a temporary >     > preview file on your hard drive which combines the video, image, >     and >     > audio clips with the special effects which you applied to them. The >     > SmartRender feature detects any changes in your project and if >     there >     > are no changes, instantly plays back the preview file. If there are >     > changes (for instance, when titles, video filters or transition >     > effects have been added), it renders out only the edited portions, >     > making render times much shorter and faster. >     > >     > >     > > https://www.vegascreativesoftware.info/us/forum/hdv-smart-rendering-and-bada... >     > https://www.dvinfo.net/forum/archive/index.php/t-116464.html >     > >     > https://helpx.adobe.com/premiere-pro/using/smart-rendering.html >     > >     > > https://larryjordan.com/articles/premiere-pro-export-faster-with-smart-rende... >     > >     > https://workflow.frame.io/guide/smart-rendering >     > >     > > https://blog.frame.io/2021/06/07/premiere-pro-max-render-quality-max-bit-dep... >     > >     > https://www.kevinmonahan.net/?p=88 >     > >     > >     > >     >> >     >> >     >> >     >> >     >> >     >> >     >>     After all, Blu-ray images on BD-R/RE discs and possible simpler >     >>     DVD-R/RW discs for exchange, are more reliable and playable >     >>     backups for video on tape or HDD. >     >> >     >> >     >> >     >> >     >> >     >> >     >>> >     >>> >     >>> >     >>> >     >>> >     >>> >     >>> >     >>> >     >>>         > >     >>>         > >     >>>         > >     >>>         >     Den 12.11.2022 16:36, skrev Andrew Randrianasulu: >     >>>         >     > >     >>>         >     > >     >>>         >     > сб, 12 нояб. 2022 г., 18:30 Terje J. Hanssen >     >>>         >     <[email protected]> >     >>>         <mailto:[email protected]>: >     >>>         >     > >     >>>         > >     >>>         >     >     "Finally home again", just to discover that I >     >>>         have not >     >>>         >     'bdwrite' available on my workstations upgraded with >     >>>         the latest >     >>>         >     31. Oct 2022 CinGG appimages. >     >>>         >     >     Therefore I wonder if CinGG Appimage not >     provide >     >>>         and make it >     >>>         >     possible to run bdwrite from command line (similar >     >>>         like no ffmpeg) >     >>>         >     without a single user build? >     >>>         >     > >     >>>         >     > >     >>>         >     > I think you can unpack/mount appimages . >     >>>         >     > >     >>>         >     > >     >>>         > >     >>> > https://docs.appimage.org/user-guide/run-appimages.html#mount-an-appimage >     >>>         >     > >     >>>         >     > then you hopefully will find bdwrite inside .... >     >>>         >     > >     >>>         >     > or slightly down this question  documentation said >     >>>         you can >     >>>         >     extract content of appimage into directory. So, >     if bdwrite >     >>>         >     actually there you can run it from there or copy >     it to >     >>>         some place >     >>>         >     > >     >>>         > >     >>>         > >     >>>         >     1) >     >>>         >     First attempt as Type 1 appimage: >     >>>         > >     >>>         >  terje@localhost:~> sudo mount >     >>>         >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >     >>>         >  /home/terje/mountpoint/ >     >>>         > >     >>>         >     [sudo] passord for root: >     >>>         >     mount: /home/terje/mountpoint: wrong fs type, bad >     >>>         option, bad >     >>>         >     superblock on /dev/loop0, missing codepage or helper >     >>>         program, or >     >>>         >     other error. >     >>>         > >     >>>         >  terje@localhost:~> umount /home/terje/mountpoint/ >     >>>         >     umount: /home/terje/mountpoint: not mounted. >     >>>         > >     >>>         > >     >>>         >     2) >     >>>         >     Second attempt as Type 2 appimage: >     >>>         > >     >>>         >  terje@localhost:~> >     >>>         >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >     >>>         >     --appimage-offset >     >>>         > >     >>>         >     but why all these warnings and failed messages? >     >>>         >     ---------- >     >>>         > >     >>>         >  /usr/bin/AppImageLauncher: >     /usr/lib64/libcurl.so.4: no >     >>>         version >     >>>         >     information available (required by >     >>>         > >     >>> >    /usr/bin/../lib/x86_64-linux-gnu/appimagelauncher/libappimageupdate.so) >     >>>         >     Warning: Ignoring XDG_SESSION_TYPE=wayland on >     Gnome. Use >     >>>         >  QT_QPA_PLATFORM=wayland to run on Wayland anyway. >     >>>         > >     >>>         >     ** (AppImageLauncher:7534): WARNING **: >     17:40:13.433: >     >>>         Pixbuf >     >>>         >     theme: Cannot load pixmap file >     >>>         > >     >>> >    /usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png: >     >>>         >     Feil under lasting av bilde >     >>>         > >     >>> >    «/usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png»: >     >>>         >     Fatal feil i PNG-bildefil: bad parameters to zlib >     >>>         > >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_width: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >     ** (AppImageLauncher:7534): WARNING **: >     17:40:13.433: >     >>>         Invalid >     >>>         >     borders specified for theme pixmap: >     >>>         > >     >>> >    /usr/share/themes/Breeze/gtk-2.0/../assets/progressbar-trough.png, >     >>>         >     borders don't fit within the image >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >     >>>         'GDK_IS_PIXBUF >     >>>         >     (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >     >>>         'GDK_IS_PIXBUF >     >>>         >     (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >     >>>         'GDK_IS_PIXBUF >     >>>         >     (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >     >>>         'GDK_IS_PIXBUF >     >>>         >     (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >     >>>         'GDK_IS_PIXBUF >     >>>         >     (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >     >>>         'GDK_IS_PIXBUF >     >>>         >     (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >     >>>         'GDK_IS_PIXBUF >     >>>         >     (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >     >>>         'GDK_IS_PIXBUF >     >>>         >     (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_n_channels: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_pixels_with_length: assertion >     >>>         'GDK_IS_PIXBUF >     >>>         >     (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_rowstride: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_width: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         > >     >>>         >  (AppImageLauncher:7534): GdkPixbuf-CRITICAL **: >     >>>         17:40:13.433: >     >>>         >  gdk_pixbuf_get_height: assertion 'GDK_IS_PIXBUF >     >>>         (pixbuf)' failed >     >>>         >     189632 >     >>>         >     ---------------- >     >>>         > >     >>>         > >     >>>         >  terje@localhost:~> sudo mount >     >>>         >  /home/terje/Applications/CinGG-20221031-x86_64.AppImage >     >>>         >  /home/terje/mountpoint/ -o offset=189632 >     >>>         >     [sudo] passord for root: >     >>>         > >     >>>         >  terje@localhost:~> cd mountpoint >     >>>         >  terje@localhost:~/mountpoint> ls >     >>>         >     AppRun  cin.desktop cin.svg  usr >     >>>         >  terje@localhost:~/mountpoint> ls -la >     >>>         >     totalt 40 >     >>>         >     drwxr-xr-x   3 root  root 102 okt.  31 15:24 . >     >>>         >     drwxr-xr-x 124 terje users 36864 nov.  12 17:31 .. >     >>>         >     lrwxrwxrwx   1 root root     11 okt.  31 15:24 >     AppRun >     >>>         -> usr/bin/cin >     >>>         >     lrwxrwxrwx   1 root root     34 okt.  31 15:24 >     >>>         cin.desktop -> >     >>>         >  usr/share/applications/cin.desktop >     >>>         >     lrwxrwxrwx   1 root root     45 okt.  31 15:24 >     cin.svg -> >     >>>         >  usr/share/icons/hicolor/scalable/apps/cin.svg >     >>>         >     lrwxrwxrwx   1 root root      7 okt.  31 15:24 >     >>>         .DirIcon -> cin.svg >     >>>         >     drwxr-xr-x   5 root root     62 okt.  31 15:23 usr >     >>>         > >     >>>         >  terje@localhost:~/mountpoint> find . -name bdwrite >     >>>         >     ./usr/bin/bdwrite >     >>>         > >     >>>         >  terje@localhost:~/mountpoint> stat ./usr/bin/bdwrite >     >>>         >       Fil: ./usr/bin/bdwrite >     >>>         >       Størrelse: 35940792 [tab]Blokker: 70197      IO >     >>>         Blokk: 1024 >     >>>         >     vanlig fil >     >>>         >     Enhet: 700h/1792d Datanode: 12          Lenker: 1 >     >>>         >     Tilgang: (0755/-rwxr-xr-x) Uid: (    0/    root) >     Gid: >     >>>         (    0/ >     >>>         >     root) >     >>>         >     Tilgang: 2022-10-31 15:23:57.000000000 +0100 >     >>>         >     Omgjøring: 2022-10-31 15:23:57.000000000 +0100 >     >>>         >     Endring: 2022-10-31 15:23:57.000000000 +0100 >     >>>         >      Fødsel: - >     >>>         > >     >>>         >  terje@localhost:~/mountpoint> which bdwrite >     >>>         >     which: no bdwrite in >     >>>  (/home/terje/bin:/usr/local/bin:/usr/bin:/bin) >     >>>         > >     >>>         >     Copied the mounted bdwrite to /usr/bin: >     >>>         > >     >>>         >  terje@localhost:~/mountpoint> sudo cp >     >>>         ./usr/bin/bdwrite /usr/bin >     >>>         >     [sudo] passord for root: >     >>>         >  terje@localhost:~/mountpoint> ls -la /usr/bin/bdwrite >     >>>         >     -rwxr-xr-x 1 root root 35940792 nov.  12 18:00 >     >>>         /usr/bin/bdwrite >     >>>         > >     >>>         >     ============= >     >>>         > >     >>>         >     3) >     >>>         >     Tried the extracted bdwrite with a hdv-file >     transcoded >     >>>         to Blu-ray >     >>>         >     pcm_bluray audio and mts stream >     >>>         > >     >>>         >     localhost:~ # cd /home/terje/Videoklipp >     >>>         >  localhost:/home/terje/Videoklipp # ls -1 *.mts >     >>>         >     2008_m2t-ac3.mts >     >>>         >  2008_m2t_pcm_bluray.mts >     >>>         >  hdv01_05_m2t_pcm_bluray.mts >     >>>         >  hdv01_m2t_pcm_bluray.mts >     >>>         >  hdv_iLink_m2t_pcm_bluray.mts >     >>>         > >     >>>         > >     >>>         >  localhost:/home/terje/Videoklipp # ffprobe -hide_banner >     >>>         >  2008_m2t_pcm_bluray.mts >     >>>         >     Input #0, mpegts, from '2008_m2t_pcm_bluray.mts': >     >>>         >       Duration: 00:00:13.44, start: 1.440000, bitrate: >     >>>         27988 kb/s >     >>>         >       Program 1 >     >>>         >         Metadata: >     >>>         > service_name    : Service01 >     >>>         > service_provider: FFmpeg >     >>>         >       Stream #0:0[0x1011]: Video: mpeg2video (Main) >     >>>         ([2][0][0][0] / >     >>>         >     0x0002), yuv420p(tv, bt709, top first), >     1440x1080 [SAR >     >>>         4:3 DAR >     >>>         >     16:9], 25000 kb/s, 25 fps, 25 tbr, 90k tbn >     >>>         >         Side data: >     >>>         >           cpb: bitrate max/min/avg: 25000000/0/0 buffer >     >>>         size: 7340032 >     >>>         >     vbv_delay: N/A >     >>>         >       Stream #0:1[0x1100]: Audio: pcm_bluray >     ([128][0][0][0] / >     >>>         >     0x0080), 48000 Hz, stereo, s16, 1536 kb/s >     >>>         >  localhost:/home/terje/Videoklipp # du -sb *.mts >     >>>         >     43333624 2008_m2t-ac3.mts >     >>>         >     47020032 2008_m2t_pcm_bluray.mts >     >>>         >     1603362816 hdv01_05_m2t_pcm_bluray.mts >     >>>         >     2299017216 hdv01_m2t_pcm_bluray.mts >     >>>         >     399237120 hdv_iLink_m2t_pcm_bluray.mts >     >>>         > >     >>>         > >     >>>         >  localhost:/home/terje/Videoklipp # ls -la >     >>>         2008_m2t_pcm_bluray.mts >     >>>         >     -rw-r--r-- 1 terje users 47020032 Nov 11 22:06 >     >>>         2008_m2t_pcm_bluray.mts >     >>>         > >     >>>         > >     >>>         >  localhost:/home/terje/Videoklipp # mkudffs -b 2048 >     >>>         >  /tmp/newfilename.udfs 27055 >     >>>         >  filename=/tmp/newfilename.udfs >     >>>         >     label=LinuxUDF >     >>>         >  uuid=636fdd9d0eee73bf >     >>>         >     blocksize=2048 >     >>>         >     blocks=27055 >     >>>         >     udfrev=201 >     >>>         >     start=0, blocks=16, type=RESERVED >     >>>         >     start=16, blocks=3, type=VRS >     >>>         >     start=19, blocks=237, type=USPACE >     >>>         >     start=256, blocks=1, type=ANCHOR >     >>>         >     start=257, blocks=16, type=PVDS >     >>>         >     start=273, blocks=1, type=LVID >     >>>         >     start=274, blocks=26524, type=PSPACE >     >>>         >     start=26798, blocks=1, type=ANCHOR >     >>>         >     start=26799, blocks=239, type=USPACE >     >>>         >     start=27038, blocks=16, type=RVDS >     >>>         >     start=27054, blocks=1, type=ANCHOR >     >>>         > >     >>>         > >     >>>         >  localhost:/home/terje/Videoklipp # mount -o loop >     >>>         >  /tmp/newfilename.udfs /mnt/test >     >>>         > >     >>>         >  localhost:/home/terje/Videoklipp # bdwrite /mnt/test >     >>>         >  2008_m2t_pcm_bluray.mts >     >>>         > >     >>>         >     but got an error message: >     >>>         > >     >>>         >     bdwrite: error while loading shared libraries: >     >>>         >  libIlmImf-2_3.so.24: cannot open shared object file: >     >>>         No such file >     >>>         >     or directory >     >>>         > >     >>>         > >     >>> >     >> >     > >