[Cin] Dragging label past very beginning of timeline make it disappear
Phyllis Smith
phylsmith2017 at gmail.com
Mon Mar 2 02:56:47 CET 2020
*Andrew*, feedback on issues you noted in the last couple of days.
?? ( 1) On Compositor freeze: ... just enable zoom mode, click inside
canvas so zoom bar appear and zoom set itself to 1.3 and then click on
indicator area. Compositor freeze.
(1) I now have tried all kinds of ways to get this to happen as you
outlined, but it just always works correctly. Maybe like you said,
optimization, but that does not make any sense to us. And why only since
2019-11-07 or maybe that is just as far as you went. I really wanted to see
this freeze but did not.
??(2) I was trying to see if I can use this area of Compositor window where
small vertical indicator of playback position moves (I hoped to reuse it
for faster scrolling, like it was done in Viewer window).
(2) Faster scrolling in the Compositor works like the Viewer window when
you pan on the indicator (at least for me). It might be a little slower in
the compositor because it has to update the cursor on the timeline too and
keep track of things. So am not sure why you do not see the same type of
speed up that you do in the Viewer.
??(3) ...is there way to make ths 'jogwell' speed control ... for faster
than 2x playback/reverse?
(3) The shuttle plugged into a usb does this really, really well. But a
good idea that might work would be to add an "accelerator" to the play
forward / play reverse keys on the keypad (the Enter and + keys). By
accelerator, I mean you hold down the key longer and it speeds up and the
longer you hold it down the more it goes "like a bat out of hell". Have to
ask gg to see.
??(4)... clicking on video track for some reason autoselect both video and
audio tracks now??
(4) As far as I know, it always has worked this way and highlights all
tracks if I understand your question correctly. That is, double left mouse
click on the timeline highlights (inverts the color) the video and audio.
I am talking about in Cut and Paste mode.
??(5) I can see fade again, and it works on all tracks as fade.
(5) Sometimes the minimum and maximum range in the bottom timeline zoom bar
get accidentally set to bad values. For example if you set the range for
Audio Fade to "-3.0 to -2.0" you will not be able to see the automation
Fade line in the audio tracks. So if your auto is enabled and you can not
see the line, check the ranges on the zoom bar.
??(6) Sorry for a lot of noise ...
(6) This is not noise -- it is quite helpful to us. As in # 5 above, we
learned something new which is that the shortcut "Alt-f" and "Ctrl-Alt-f"
are supposed to reset the automation ranges to good max/min ranges but only
if within certain limits. And now we know that this is something that
needs to change to work better.
??(7) I hope your dog himself is OK
(7) Now that the dog door is fixed with a new rope, yes the dog is OK but
he was upset for several hours before that.
??(8) I dragged label right (beyond media end) and left (again, much left,
so label become invisible), and then again right (all without releasing
LMB). Now, I can't see label ... but sometimes with strange time.
(8) It looks a little strange and probably should stop at the beginning
with a timestamp of 0. You can delete this as you probably already know,
but this would be a good cleanup mod for gg. It should look the same as if
you put a Label at the Home / Beginning position.
??(9) just re-introduced Ogg/Theora video, while working in itself warns me
in MPlayer ...
(9) GG will continue to work on Ogg and will see what the problem you
reported of "Broken file, keyframe not correctly marked" means and
hopefully can fix it. We have been able to reproduce this so can fix it.
On Sat, Feb 29, 2020 at 1:32 AM Andrew Randrianasulu <
randrianasulu at gmail.com> wrote:
> On Compositor freeze: it was freezing in all my versions of CinelerraGG
> compiled after 2019-11-07. You don't even need to enable click-to-play,
> just enable zoom mode, click inside canvas so zoom bar appear and zoom set
> itself to 1.3
> and then click on indicator area. Compositor freezed.
>
> Then I tried to play with lables. Set cursor (on empty black space outside
> of any track)
> somewhere and then clicked icon 'Add label in current position' in main
> window.
> It worked. I tried to click-and-hold this label with LMB.
> It worked, too. Now, not releasing LMB I dragged label right (beyond media
> end)
> and left (again, much left, so label become invisible),
> and then again right (all without releasing LMB). Now, I can't see label
> o.O
> It still here in Resources/Labels , but sometimes with strange time.
>
> In terminal I saw this:
>
> LANG=C cin
> Cinelerra Infinity - built: Feb 28 2020 20:17:26
> git://git.cinelerra-gg.org/goodguy/cinelerra.git
> (c) 2006-2019 Heroine Virtual Ltd. by Adam Williams
> 2007-2020 mods for Cinelerra-GG by W.P.Morrow aka goodguy
> Cinelerra is free software, covered by the GNU General Public License,
> and you are welcome to change it and/or distribute copies of it under
> certain conditions. There is absolutely no warranty for Cinelerra.
>
> MainUndo::update_undo_before 91 "": must be on an after entry to do this.
> size=9
> UndoStack::dump
> 0 0xe633540 4 0000 *
> k 1 0xdee63a0 label 5892 0010
> k 2 0xdec1810 label 5837 0010
> 3 0xdee3b48 drag label 978 0010
> 4 0xdee38f0 drag label 4 0010
> k 5 0xde81e60 label 5829 0010
> k 6 0xea40e28 label 5795 0010
> 7 0xee2b588 load 3257 ffffffff
> k 8 0xdd65718 load 4948 ffffffff
> MainUndo::update_undo_after 141 "label": must be on a before entry to do
> this. size=10
> UndoStack::dump
> 0 0xee45760 923 0000 *
> 1 0xe633540 4 0000
> k 2 0xdee63a0 label 5892 0010
> k 3 0xdec1810 label 5837 0010
> 4 0xdee3b48 drag label 978 0010
> 5 0xdee38f0 drag label 4 0010
> k 6 0xde81e60 label 5829 0010
> k 7 0xea40e28 label 5795 0010
> 8 0xee2b588 load 3257 ffffffff
> k 9 0xdd65718 load 4948 ffffffff
> MainUndo::update_undo_before 91 "drag label": must be on an after entry to
> do this. size=11
> UndoStack::dump
> k 0 0xde81fe0 label 5892 0010 *
> 1 0xee45760 label 923 0010
> 2 0xe633540 4 0000
> k 3 0xdee63a0 label 5892 0010
> k 4 0xdec1810 label 5837 0010
> 5 0xdee3b48 drag label 978 0010
> 6 0xdee38f0 drag label 4 0010
> k 7 0xde81e60 label 5829 0010
> k 8 0xea40e28 label 5795 0010
> 9 0xee2b588 load 3257 ffffffff
> k 10 0xdd65718 load 4948 ffffffff
> Session time: 0:04:08
> Cpu time: user: 0:01:30.600 sys: 0:00:06.547
>
> Additionally, just re-introduced Ogg/Theora video, while working in itself
> warns me in MPlayer:
>
> mplayer /dev/shm/12.ogg
> MPlayer SVN-r38152-5.5.0 (C) 2000-2019 MPlayer Team
>
> Playing /dev/shm/12.ogg.
> libavformat version 58.33.100 (internal)
> libavformat file format detected.
> [theora @ 0x577347e0]7 bits left in packet 82
> [ogg @ 0x575dc9e0]Broken file, keyframe not correctly marked.
> [lavf] stream 0: video (theora), -vid 0
> [lavf] stream 1: audio (vorbis), -aid 0
> VIDEO: [theo] 720x400 0bpp 25.000 fps 0.0 kbps ( 0.0 kbyte/s)
> ==========================================================================
> Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
> libavcodec version 58.59.102 (internal)
> [theora @ 0x577347e0]7 bits left in packet 82
> Selected video codec: [fftheora] vfm: ffmpeg (FFmpeg Theora)
> ==========================================================================
> Load subtitles in /dev/shm/
> ==========================================================================
> Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
> AUDIO: 48000 Hz, 2 ch, floatle, 128.0 kbit/4.17% (ratio: 16000->384000)
> Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis)
> ==========================================================================
> [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or
> directory
> [AO_ALSA] alsa-lib: confmisc.c:1281:(snd_func_refer) Unable to find
> definition 'defaults.pcm.dmix.channels'
> [AO_ALSA] alsa-lib: conf.c:4568:(_snd_config_evaluate) function
> snd_func_refer returned error: No such file or directory
> [AO_ALSA] alsa-lib: conf.c:5036:(snd_config_expand) Args evaluate error:
> No such file or directory
> [AO_ALSA] alsa-lib: pcm.c:2564:(snd_pcm_open_noupdate) Unknown PCM dmix:SB
> [AO_ALSA] Playback open error: No such file or directory
> [AO ARTS] loading the aRts backend "/usr/lib/libartscbackend.la" failed
> [AO ESD] esd_open_sound failed: Connection timed out
> Cannot connect to server socket err = No such file or directory
> Cannot connect to server request channel
> jack server is not running or cannot be started
> [JACK] cannot open server
> [AO SDL] Samplerate: 48000Hz Channels: Stereo Format floatle
> [AO SDL] Unsupported audio format: 0x1d.
> [AO_ALSA] alsa-lib: confmisc.c:1281:(snd_func_refer) Unable to find
> definition 'defaults.pcm.dmix.channels'
> [AO_ALSA] alsa-lib: conf.c:4568:(_snd_config_evaluate) function
> snd_func_refer returned error: No such file or directory
> [AO_ALSA] alsa-lib: conf.c:5036:(snd_config_expand) Args evaluate error:
> No such file or directory
> [AO_ALSA] alsa-lib: pcm.c:2564:(snd_pcm_open_noupdate) Unknown PCM dmix:SB
> [AO SDL] Unable to open audio: No available audio device
> [AO_ALSA] alsa-lib: confmisc.c:1281:(snd_func_refer) Unable to find
> definition 'defaults.pcm.dmix.channels'
> [AO_ALSA] alsa-lib: conf.c:4568:(_snd_config_evaluate) function
> snd_func_refer returned error: No such file or directory
> [AO_ALSA] alsa-lib: conf.c:5036:(snd_config_expand) Args evaluate error:
> No such file or directory
> [AO_ALSA] alsa-lib: pcm.c:2564:(snd_pcm_open_noupdate) Unknown PCM dmix:SB
> AL lib: (EE) alsa_open_playback: Could not open playback device 'default':
> No such file or directory
> [OpenAL] could not open device
> DVB card number must be between 1 and 4
> AO: [null] 48000Hz 2ch floatle (4 bytes per sample)
> Starting playback...
> Movie-Aspect is 1.80:1 - prescaling to correct movie aspect.
> VO: [xv] 720x400 => 720x400 Planar YV12
> [VD_FFMPEG] DRI failure.
> Movie-Aspect is 1.80:1 - prescaling to correct movie aspect.
> VO: [xv] 720x400 => 720x400 Planar YV12
> A: 0.1 V: 0.0 A-V: 0.088 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0
> [VD_FFMPEG] DRI failure.
> A: 2.2 V: 2.2 A-V: -0.000 ct: -0.000 0/ 0 2% 2% 0.4% 0 0
> [ogg @ 0x575dc9e0]Broken file, keyframe not correctly marked.
> A: 3.4 V: 3.4 A-V: -0.000 ct: -0.000 0/ 0 1% 2% 0.4% 0 0
> [ogg @ 0x575dc9e0]Broken file, keyframe not correctly marked.
> A: 3.6 V: 3.6 A-V: -0.000 ct: -0.000 0/ 0 1% 2% 0.4% 0 0
> [ogg @ 0x575dc9e0]Broken file, keyframe not correctly marked.
> A: 4.1 V: 4.1 A-V: 0.000 ct: -0.000 0/ 0 1% 1% 0.4% 0 0
> [ogg @ 0x575dc9e0]Broken file, keyframe not correctly marked.
> [ogg @ 0x575dc9e0]Broken file, keyframe not correctly marked.
> A: 10.2 V: 10.2 A-V: 0.037 ct: 0.110 0/ 0 0% 0% 0.5% 0 0
>
>
> --
>
> ignore audio init fail, just some .asoundrc trouble under root.
> (keyframe/forced keyframe in vid. codec settings were left at 64)
> may be false alarm, will try to update MPlayer :}
> --
> Cin mailing list
> Cin at lists.cinelerra-gg.org
> https://lists.cinelerra-gg.org/mailman/listinfo/cin
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20200301/882b23f3/attachment-0001.html>
More information about the Cin
mailing list