[Cin] HDV with PCM audio as Blu-ray video burned to BD-RE discs
Andrew Randrianasulu
randrianasulu at gmail.com
Tue Dec 6 16:39:53 CET 2022
вт, 6 дек. 2022 г., 03:33 Terje J. Hanssen via Cin <
cin at lists.cinelerra-gg.org>:
> I had to troubleshoot and replace a bad SATA power connector to my
> internal LG Blu-ray burner that caused confusing disc mount issues and
> delay, before the burner device worked properly again.
>
> lsscsi | grep BD
> [5:0:0:0] cd/dvd HL-DT-ST BD-RE BH10LS30 1.02 /dev/sr0
>
>
> So far I have tested successful burning on BD50-RE DL discs with K3b/cdrecord
> using a single 2GB HDV clip with PCM transcoded audio written to Blu-ray
> video UDF image. For HDV this time I've tested BD-RE discs from two
> manufacturers, Verbatim and unlabeled (dealer Slowmoose). Last year I
> tested also SD-Bluray video successful burned on TDK BD-RE discs.
>
>
> And most important, the discs starts as autoplay after loading in my
> Samsung UBD-K8500 Blu-ray hardware player. The quality of interlaced video
> and PCM audio seems for me equivalent via VLC and Samsung BD player.
> Testing is executed on VLC/Leap 15.4 workstation and Samsung BD-player,
> both connected to the same Asus 27" LCD monitor (PB2780Q), easy switchable
> via DP and HDMI ports respectively.
>
>
> To summarize and repeat procedure for this test case:
>
> > ffmpeg -i hdv01_m2t -c:v copy -c:a pcm_bluray -mpegts_m2ts_mode 1
> hdv01_m2t_pcm_bluray.mts
> # mkudffs -b 2048 /tmp/hdv01_m2t_pcm_bluray.udfs 1126663
> # mount -o loop /tmp/hdv01_m2t_pcm_bluray.udfs /mnt/test
> # /home/terje/mountpoint/usr/bin/bdwrite /mnt/test hdv01_m2t_pcm_bluray.mts
> # umount /mnt/test
>
> K3b: Burn CD-image, 2x speed (BD50-RE DL)
> image to burn; /tmp/hdv01_m2t_pcm_bluray.udfs
> (not recognizeable, but selece burn it anyway, 2-4x times)
> image type: Auto
> Burning program: cdrecord
> (warning to add the actual user to cdrom group)
> Start
>
>
> A question before leaving some error/warning details from various tools
> output/log below:
>
> Is it possible to get bdwrite to keep the original, multiple video clip
> names? In this case single clip: hdv01.mts
>
I think only way I saw in manual (but not tested) is to add chain of clips
as arguments to bdwrite, so you will have titles to select via remote
control
https://cinelerra-gg.org/download/CinelerraGG_Manual/Blu_ray_from_Multiple_CINEL.html
not sure what will happen if you add like 20 titles this way - screen area
will overflown by title names?
Thanks for your experiments, hopefully Phyllis will update manual section
before new year with new line about transcoding audio, while leaving video
intact.
>
> #####################################
>
>
> K3b/cdrecord log:
> =================
>
> Devices
> -----------------------
> HL-DT-ST BD-RE BH10LS30 1.02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM,
> DVD-R, DVD-RW, DVD-R DL, BD-ROM, BD-R, BD-R, DVD+R, DVD+RW, DVD+R DL)
> [DVD-ROM, Sekvensiell DVD-R, Sekvensiell tolags DVD-R, Bytt lag på tolags
> DVD-R, DVD-RAM, DVD-RW Begrenset overskriving, DVD-RW Sekvensiell, DVD+RW,
> DVD+R, Tolags DVD+R, CD-ROM, CD-R, CD-RW, BD-ROM, Sekvensiell DVD-R (SRM),
> BD-R Tilfeldig(RRM), BD-R] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16,
> RAW/R96P, RAW/R96R, Begrenset overskriving, Bytt lag, Tilfeldig opptak,
> Sekvensielt opptak , Sekvensielt opptak + POW] [%7]
>
> System
> -----------------------
> K3b Version: 21.12.3
> KDE Version: 5.90.0
> Qt Version: 5.15.2
> Kernel: 5.14.21-150400.24.33-default
>
> Used versions
> -----------------------
> cdrecord: 3.2a09
>
> cdrecord
> -----------------------
> cdrecord: Insufficient 'file read' privileges. You will not be able to
> open all needed devices.
> cdrecord: Insufficient 'file write' privileges. You will not be able to
> open all needed devices.
> cdrecord: Insufficient 'device' privileges. You may not be able to send
> all needed SCSI commands, this my cause various unexplainable problems.
> cdrecord: Insufficient 'network' privileges. You will not be able to do
> remote SCSI.
> scsidev: '/dev/sr0'
> devname: '/dev/sr0'
> scsibus: -2 target: -2 lun: -2
> Warning: Open by 'devname' is unintentional and not supported.
> Linux sg driver version: 3.5.27
> SCSI buffer size: 64512
> cdrecord: Warning: DMA resid 0 for 'read buffer', actual data is too short.
> cdrecord: Warning: The DMA speed test has been skipped.
> Cdrecord-ProDVD-ProBD-Clone 3.02a09 (x86_64-unknown-linux-gnu) Copyright
> (C) 1995-2016 Joerg Schilling
> TOC Type: 1 = CD-ROM
> Using libscg version 'schily-0.9'.
> Driveropts: 'burnfree'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 5
> Response Format: 2
> Capabilities :
> Vendor_info : 'HL-DT-ST'
> Identifikation : 'BD-RE BH10LS30 '
> Revision : '1.02'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
> Current: BD-RE
> Profile: BD-ROM
> Profile: BD-R sequential recording
> Profile: BD-R random recording
> Profile: BD-RE (current)
> Profile: DVD-RAM
> Profile: DVD-R sequential recording
> Profile: DVD-R/DL sequential recording
> Profile: DVD-R/DL layer jump recording
> Profile: DVD-RW sequential recording
> Profile: DVD-RW restricted overwrite
> Profile: DVD+RW
> Profile: DVD+R
> Profile: DVD+R/DL
> Profile: DVD-ROM
> Profile: CD-R
> Profile: CD-RW
> Profile: CD-ROM
> Profile: Removable Disk (current)
> Using generic SCSI-3/mmc-3 BD-RE driver (mmc_bdre).
> Driver flags : NO-CD BD MMC-3 BURNFREE
> Supported modes: PACKET SAO LAYER_JUMP
> Drive buf size : 2031616 = 1984 KB
> Drive pbuf size: 3850240 = 3760 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 2200 MB
> Total size: 2200 MB = 1126663 sectors
> Current Secsize: 2048
> Trying to clear drive status.
> WARNING: Drive returns zero media size, correcting.
> Blocks total: 23652352 Blocks current: 23652352 Blocks remaining: 22525689
> Reducing transfer size from 64512 to 32768 bytes.
> Starting to write CD/DVD/BD at speed 2 in real SAO mode for single session.
> Last chance to quit, starting real write in 3 seconds.
> 2 seconds.
> 1 seconds.
> 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Starting new track at sector: 0
> Track 02: 0 of 2200 MB written.
> Track 02: 1 of 2200 MB written (fifo 88%) 0,0x.
> Track 02: 2 of 2200 MB written (fifo 99%) [buf 50%] 0,1x.
> Track 02: 3 of 2200 MB written (fifo 96%) [buf 50%] 2,0x.
> Track 02: 4 of 2200 MB written (fifo 97%) [buf 50%] 0,6x.
> Track 02: 5 of 2200 MB written (fifo 99%) [buf 50%] 2,0x
> .......... snip ........
> ........
> Track 02: 6 of 2200 MB written (fifo 96%) [buf 50%] 0,6x.
> Track 02: 7 of 2200 MB written (fifo 98%) [buf 50%] 2,0x
> Track 02: 2199 of 2200 MB written (fifo 100%) [buf 50%] 2,0x.
> Track 02: 2200 of 2200 MB written (fifo 100%) [buf 50%] 0,6x.
> Track 02: Total bytes read/written: 2307405824/2307405824 (1126663
> sectors).
> Writing time: 562.967s (00:09:22.967)
> Average write speed 0,9x.
> Min drive buffer fill was 50%
> Fixating...
> Fixating time: 2.046s (00:00:02.046)
> cdrecord: fifo had 70417 puts and 70417 gets.
> cdrecord: fifo was 0 times empty and 12961 times full, min fill was 77%.
>
> cdrecord command:
> -----------------------
> /usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=2 -sao
> driveropts=burnfree -data -tsize=1126663s -
>
>
> ===================================
>
> terje at localhost:~> bd_info /dev/sr0
> Using libbluray version 1.3.0
> Volume Identifier : LinuxUDF
> BluRay detected : yes
> First Play supported: yes
> Top menu supported : yes
> HDMV titles : 1
> BD-J titles : 0
> UNSUPPORTED titles : 0
>
> BD-J detected : no
>
> AACS detected : no
>
> BD+ detected : no
>
> Application info:
> initial mode preference : 2D
> 3D content exists : No
> video format : ignored (0x0)
> frame rate : ignored (0x0)
> initial dynamic range : SDR (0x0)
> provider data : ' '
>
> No disc library metadata
>
> ========================
>
> terje at localhost:~> bd_list_titles /dev/sr0
> Main title: 1
> index: 1 duration: 00:10:58 chapters: 4 angles: 1 clips: 1
> (playlist: 00000.mpls) V:1 A:1 PG:0 IG:0 SV:0 SA:0
>
>
> =========================
>
>
> ffprobe -hide_banner bluray:/dev/sr0
> [bluray @ 0x560bad897b80] 1 usable playlists:
> [bluray @ 0x560bad897b80] playlist 00000.mpls (0:10:58)
> [bluray @ 0x560bad897b80] selected 00000.mpls
> [mpegts @ 0x560bad898f80] probed stream 2 failed
> [mpegts @ 0x560bad898f80] stream 1 : no PTS found at end of file, duration
> not set
> bluray.c:300: 00000.m2ts: no timestamp for SPN 0 (got 0). clip
> 66600-29714400.
> [mpegts @ 0x560bad898f80] Could not find codec parameters for stream 2
> (Unknown: none): unknown codec
> Consider increasing the value for the 'analyzeduration' (0) and
> 'probesize' (5000000) options
> Input #0, mpegts, from 'bluray:/dev/sr0':
> Duration: 00:10:58.92, start: 1.440000, bitrate: 27912 kb/s
> Program 1
> Metadata:
> service_name : Service01
> service_provider: FFmpeg
> Stream #0:0[0x1011]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002),
> yuv420p(tv, bt709, top first), 1440x1080 [SAR 4:3 DAR 16:9], 25000 kb/s, 25
> fps, 25 tbr, 90k tbn
> Side data:
> cpb: bitrate max/min/avg: 25000000/0/0 buffer size: 7340032
> vbv_delay: N/A
> Stream #0:1[0x1100]: Audio: pcm_bluray ([128][0][0][0] / 0x0080), 48000
> Hz, stereo, s16, 1536 kb/s
> No Program
> Stream #0:2[0x1fff]: Unknown: none
> Unsupported codec with id 0 for input stream 2
>
> ===================
>
> terje at localhost:~> udfinfo /dev/sr0
> udfinfo: Warning: Device '/dev/sr0' is busy, udfinfo may report bogus
> information
> udfinfo: Warning: Second and third Anchor Volume Descriptor Pointer not
> found
> udfinfo: Warning: Logical Volume is in inconsistent state
> filename=/dev/sr0
> label=LinuxUDF
> uuid=63890d51c6cae8fc
> lvid=LinuxUDF
> vid=LinuxUDF
> vsid=LinuxUDF
> fsid=LinuxUDF
> fullvsid=63890d51c6cae8fcLinuxUDF
> owner=Linux mkudffs 1.3
> organization=Linux udftools 1.3
> contact=https://github.com/pali/udftools/
> appid=*Linux mkudffs
> impid=*Linux UDFFS
> winserialnum=0xd72b26b6
> blocksize=2048
> blocks=23652352
> usedblocks=1122679
> freeblocks=3453
> behindblocks=22525690
> numfiles=9
> numdirs=24
> udfrev=2.01
> udfwriterev=2.01
> integrity=opened
> accesstype=overwritable
> softwriteprotect=no
> hardwriteprotect=no
> start=16, blocks=3, type=VRS
> start=256, blocks=1, type=ANCHOR
> start=257, blocks=16, type=MVDS
> start=273, blocks=1, type=LVID
> start=274, blocks=1126132, type=PSPACE
> start=1126646, blocks=16, type=RVDS
>
> #################################
>
>
>
>
>
>
> .
>
>
>
>
>
>
> --
> Cin mailing list
> Cin at lists.cinelerra-gg.org
> https://lists.cinelerra-gg.org/mailman/listinfo/cin
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20221206/9f9de2da/attachment-0001.htm>
More information about the Cin
mailing list