[Cin] HDV manual section need some work
Andrew Randrianasulu
randrianasulu at gmail.com
Sun Nov 6 23:36:50 CET 2022
пн, 7 нояб. 2022 г., 01:18 Terje J. Hanssen <terjejhanssen at gmail.com>:
>
>
> Den 06.11.2022 02:14, skrev Andrew Randrianasulu:
>
>
>
> вс, 6 нояб. 2022 г., 03:30 Terje J. Hanssen <terjejhanssen at gmail.com>:
>
>>
>>
>> Den 06.11.2022 00:56, skrev Andrew Randrianasulu:
>>
>>
>>
>> вс, 6 нояб. 2022 г., 02:06 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>
>>>
>>>
>>> Den 05.11.2022 23:25, skrev Andrew Randrianasulu:
>>>
>>>
>>>
>>> вс, 6 нояб. 2022 г., 01:05 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>>
>>>>
>>>>
>>>> Den 05.11.2022 13:46, skrev Andrew Randrianasulu:
>>>>
>>>>
>>>>
>>>> сб, 5 нояб. 2022 г., 15:39 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>>>
>>>>>
>>>>>
>>>>> Den 03.11.2022 22:13, skrev Andrew Randrianasulu:
>>>>>
>>>>>
>>>>>
>>>>> чт, 3 нояб. 2022 г., 21:28 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>>>>
>>>>>>
>>>>>>
>>>>>> Den 03.11.2022 16:17, skrev Andrew Randrianasulu:
>>>>>>
>>>>>>
>>>>>>
>>>>>> чт, 3 нояб. 2022 г., 17:52 Terje J. Hanssen <terjejhanssen at gmail.com
>>>>>> >:
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Den 03.11.2022 01:42, skrev Andrew Randrianasulu via Cin:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> чт, 3 нояб. 2022 г., 03:34 Andrew Randrianasulu <
>>>>>>> randrianasulu at gmail.com>:
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> чт, 3 нояб. 2022 г., 03:14 Andrew Randrianasulu <
>>>>>>>> randrianasulu at gmail.com>:
>>>>>>>>
>>>>>>>>> I think we can add some clarification
>>>>>>>>>
>>>>>>>>> ---
>>>>>>>>> HDV on a Blu-ray Disc Without Re-encoding
>>>>>>>>>
>>>>>>>>> An MTS file is a video file saved in the high-definition (HD) MPEG
>>>>>>>>> Transport Stream video format, commonly called AVCHD. It contains HD video
>>>>>>>>> compatible with Blu-ray disc format and is based on the MPEG-2 transport
>>>>>>>>> stream. MTS files are often used by Sony, Panasonic, Canon and other HD
>>>>>>>>> camcorders. Legal input for Video – MPEG1VIDEO, MPEG2VIDEO, H264; Audio –
>>>>>>>>> MP1, MP2, AC3, AC3PLUS, DTS, TRUHD.
>>>>>>>>>
>>>>>>>>> Note, mp2 and mp1 audio codecs are valid for transport stream
>>>>>>>>> itself but not as on-disk format for Blu-Rays.
>>>>>>>>>
>>>>>>>>> In this case you still can save original video by using ffmpeg's
>>>>>>>>> switches
>>>>>>>>>
>>>>>>>>> -c:v copy -c:a ac3 , while outputting into another temporal ts
>>>>>>>>> container.
>>>>>>>>>
>>>>>>>>> {waiting for Terje's results on pcm_bluray case}
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ---
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I think all m2ts files you used for testing were h264/aac (or
>>>>>>>>> ac3), not from-camcoder HDVs with mpeg2 video/mp2 audio.
>>>>>>>>>
>>>>>>>>> you can try HDV-in-mov from this folder as ffmpeg test file, I
>>>>>>>>> think
>>>>>>>>>
>>>>>>>>> http://samples.mplayerhq.hu/mov/FCP/
>>>>>>>>>
>>>>>>>>
>>>>>>>> oh, this is not mp2 audio but pcm audio. And ..not exactly kind of
>>>>>>>> pcm used on blurays!
>>>>>>>>
>>>>>>>> so this line work, note mpegts_m2ts_mode switch for enabling more
>>>>>>>> bluray like output, without it ffmpeg will mux audio into private stream -
>>>>>>>> good luck getting it back!
>>>>>>>>
>>>>>>>> ffmpeg -i HDV_1080i50.mov -c:v copy -c:a pcm_bluray
>>>>>>>> -mpegts_m2ts_mode 1 hdv.mts
>>>>>>>>
>>>>>>>> then tsmuxer recognizes mts file as below:
>>>>>>>>
>>>>>>>> ~/tsMuxer $ tsmuxer hdv.mts
>>>>>>>> tsMuxeR version 2.6.16-dev. github.com/justdan96/tsMuxer
>>>>>>>> Track ID: 4113
>>>>>>>> Stream type: MPEG-2
>>>>>>>> Stream ID: V_MPEG-2
>>>>>>>> Stream info: Profile: Main at 6. Resolution: 1440:1080i. Frame rate:
>>>>>>>> 25
>>>>>>>> Stream lang:
>>>>>>>>
>>>>>>>> Track ID: 4352
>>>>>>>> Stream type: LPCM
>>>>>>>> Stream ID: A_LPCM
>>>>>>>> Stream info: Bitrate: 1536Kbps Sample Rate: 48KHz Channels: 2
>>>>>>>> Bits per sample: 16bit
>>>>>>>> Stream lang: eng
>>>>>>>>
>>>>>>>> Duration: 00:00:08.000
>>>>>>>>
>>>>>>>> ====
>>>>>>>>
>>>>>>>> I wonder if you can cp this file few times and then cat them back
>>>>>>>> together for simulating longer video ) ?
>>>>>>>>
>>>>>>>>
>>>>>>> https://github.com/OpenShot/openshot-qt/issues/3428#top
>>>>>>>
>>>>>>> this one contain real very short hdv sample with mp2 sound
>>>>>>>
>>>>>>> http://twenkid.com/os/3.m2t
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> I can try to dig and test further into this matter later this month
>>>>>>> - or possibly more realistic next month.
>>>>>>> Currently I spend some holiday weeks on Gran Canaria 😎
>>>>>>>
>>>>>>
>>>>>>
>>>>>> have good times (even without camcoder!)
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Some thoughts in advance:
>>>>>>>
>>>>>>> Would it possibly be better/clear to differ/split between the
>>>>>>> formats, HDV video on tape (M2T container) and the successor H264/AVC(HD)
>>>>>>> video on disk?
>>>>>>> https://en.wikipedia.org/wiki/HDV
>>>>>>>
>>>>>>
>>>>>> sure, right now it confusing.
>>>>>>
>>>>>>
>>>>>>
>>>>>>>
>>>>>>> Possibly you still have the probably little longer HDV 1080i sample
>>>>>>> file, "20081103140154.m2t" we used for the HDV format patch here
>>>>>>> https://www.mail-archive.com/cin@lists.cinelerra-gg.org/msg02048.html
>>>>>>>
>>>>>>
>>>>>>
>>>>>> yeah, will call my friend 'find' )
>>>>>>
>>>>>> thanks!
>>>>>>
>>>>>>
>>>>>>
>>>>>>>
>>>>>>> And if Phyllis has access to a Blu-ray disc burner and BD hw
>>>>>>> player, testing could possibly start sooner(?)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>> ----
>>>>>>>>>
>>>>>>>>> For creating a blu-ray disc, if you have HDV MPEG-2 media that is
>>>>>>>>> in blu-ray format, you can save the original quality of your work, rather
>>>>>>>>> than rendering it to another format.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> {I hope Terje will let us know if bdwrite still works with bluray
>>>>>>>>> pcm audio as produced by ffmpeg 5.1+}
>>>>>>>>>
>>>>>>>>
>>>>>> I forgot one question:
>>>>>> Will it be possible and how to access and use ffmpeg-5.x included
>>>>>> with Cin-GG in a terminal as usual?
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> if you compile your own cinelerra ffmpeg binary will be in
>>>>> thirdparty/ffmpeg-5.1/ffmpeg
>>>>>
>>>>>
>>>>> we do not install this binary because cin does all work via library
>>>>> interface.
>>>>>
>>>>> So I think you can do single-user build and then play with compiled
>>>>> binary and may be even use it in shell scripting as described in
>>>>>
>>>>>
>>>>> https://cinelerra-gg.org/download/CinelerraGG_Manual/Menu_Bar_Shell_Commands.html
>>>>>
>>>>>
>>>>>
>>>>>> The latest openSUSE Leap 15.4 distro I use, has so far no official
>>>>>> ffmpeg-5.x package or codec enabled from Packman.
>>>>>> I have add-installed ffmpeg-5.1.2 from OBS (Open Build Service), but
>>>>>> don't know if it works.
>>>>>>
>>>>>>
>>>>>>
>>>>> ===========================
>>>>
>>>>
>>>>> A first test step with add-installed Experimental
>>>>> ffmpeg-5-5.1.2-lp154.35.1.x86_64.rpm for Leap 15.4 from
>>>>>
>>>>> https://software.opensuse.org/download/package?package=ffmpeg-5&project=multimedia%3Alibs
>>>>> https://build.opensuse.org/package/show/multimedia%3Alibs/ffmpeg-5
>>>>>
>>>>> zypper addrepo
>>>>> https://download.opensuse.org/repositories/multimedia:libs/15.4/multimedia:libs.repo
>>>>> zypper refresh
>>>>> zypper install ffmpeg-5
>>>>>
>>>>> ----------------
>>>>>
>>>>> ffmpeg -i 3.m2t -c:v copy -c:a pcm_bluray output.ts
>>>>> ffmpeg version 5.1.2 Copyright (c) 2000-2022 the FFmpeg developers
>>>>> built with gcc 7 (SUSE Linux)
>>>>> -------------
>>>>> Input #0, mpegts, from '3.m2t':
>>>>> Duration: 00:00:03.10, start: 1.400000, bitrate: 21633 kb/s
>>>>> Program 1
>>>>> Metadata:
>>>>> service_name : Service01
>>>>> service_provider: FFmpeg
>>>>> Stream #0:0[0x100]: Video: mpeg2video (Main) ([2][0][0][0] /
>>>>> 0x0002), yuv420p(tv, bt709, top first), 1440x1080 [SAR 4:3 DAR 16:9], 25000
>>>>> kb/s, 29.97 fps, 29.97 tbr, 90k tbn
>>>>> Side data:
>>>>> cpb: bitrate max/min/avg: 25000000/0/0 buffer size: 7340032
>>>>> vbv_delay: N/A
>>>>> Stream #0:1[0x101]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz,
>>>>> stereo, fltp, 384 kb/s
>>>>> Unknown encoder 'pcm_bluray'
>>>>>
>>>>> -----------
>>>>>
>>>>> Obviously pcm_bluray encoder is not enabled - only the decoder is
>>>>> enabled. Then it will be difficult ...
>>>>>
>>>>> ffmpeg -codecs -hide_banner | egrep "pcm|pcm_bluray"
>>>>>
>>>>> ..AIL. adpcm_4xm ADPCM 4X Movie
>>>>> ..AIL. adpcm_adx SEGA CRI ADX ADPCM
>>>>> ..AIL. adpcm_afc ADPCM Nintendo Gamecube AFC
>>>>> ..AIL. adpcm_agm ADPCM AmuseGraphics Movie AGM
>>>>> ..AIL. adpcm_aica ADPCM Yamaha AICA
>>>>> ..AIL. adpcm_argo ADPCM Argonaut Games
>>>>> ..AIL. adpcm_ct ADPCM Creative Technology
>>>>> ..AIL. adpcm_dtk ADPCM Nintendo Gamecube DTK
>>>>> ..AIL. adpcm_ea ADPCM Electronic Arts
>>>>> ..AIL. adpcm_ea_maxis_xa ADPCM Electronic Arts Maxis CDROM XA
>>>>> ..AIL. adpcm_ea_r1 ADPCM Electronic Arts R1
>>>>> ..AIL. adpcm_ea_r2 ADPCM Electronic Arts R2
>>>>> ..AIL. adpcm_ea_r3 ADPCM Electronic Arts R3
>>>>> ..AIL. adpcm_ea_xas ADPCM Electronic Arts XAS
>>>>> ..AIL. adpcm_g722 G.722 ADPCM
>>>>> ..AIL. adpcm_g726 G.726 ADPCM
>>>>> ..AIL. adpcm_g726le G.726 ADPCM little-endian
>>>>> ..AIL. adpcm_ima_acorn ADPCM IMA Acorn Replay
>>>>> ..AIL. adpcm_ima_alp ADPCM IMA High Voltage Software ALP
>>>>> ..AIL. adpcm_ima_amv ADPCM IMA AMV
>>>>> ..AIL. adpcm_ima_apc ADPCM IMA CRYO APC
>>>>> ..AIL. adpcm_ima_apm ADPCM IMA Ubisoft APM
>>>>> ..AIL. adpcm_ima_cunning ADPCM IMA Cunning Developments
>>>>> ..AIL. adpcm_ima_dat4 ADPCM IMA Eurocom DAT4
>>>>> ..AIL. adpcm_ima_dk3 ADPCM IMA Duck DK3
>>>>> ..AIL. adpcm_ima_dk4 ADPCM IMA Duck DK4
>>>>> ..AIL. adpcm_ima_ea_eacs ADPCM IMA Electronic Arts EACS
>>>>> ..AIL. adpcm_ima_ea_sead ADPCM IMA Electronic Arts SEAD
>>>>> ..AIL. adpcm_ima_iss ADPCM IMA Funcom ISS
>>>>> ..AIL. adpcm_ima_moflex ADPCM IMA MobiClip MOFLEX
>>>>> ..AIL. adpcm_ima_mtf ADPCM IMA Capcom's MT Framework
>>>>> ..AIL. adpcm_ima_oki ADPCM IMA Dialogic OKI
>>>>> ..AIL. adpcm_ima_qt ADPCM IMA QuickTime
>>>>> ..AIL. adpcm_ima_rad ADPCM IMA Radical
>>>>> ..AIL. adpcm_ima_smjpeg ADPCM IMA Loki SDL MJPEG
>>>>> ..AIL. adpcm_ima_ssi ADPCM IMA Simon & Schuster Interactive
>>>>> ..AIL. adpcm_ima_wav ADPCM IMA WAV
>>>>> ..AIL. adpcm_ima_ws ADPCM IMA Westwood
>>>>> ..AIL. adpcm_ms ADPCM Microsoft
>>>>> ..AIL. adpcm_mtaf ADPCM MTAF
>>>>> ..AIL. adpcm_psx ADPCM Playstation
>>>>> ..AIL. adpcm_sbpro_2 ADPCM Sound Blaster Pro 2-bit
>>>>> ..AIL. adpcm_sbpro_3 ADPCM Sound Blaster Pro 2.6-bit
>>>>> ..AIL. adpcm_sbpro_4 ADPCM Sound Blaster Pro 4-bit
>>>>> ..AIL. adpcm_swf ADPCM Shockwave Flash
>>>>> ..AIL. adpcm_thp ADPCM Nintendo THP
>>>>> ..AIL. adpcm_thp_le ADPCM Nintendo THP (Little-Endian)
>>>>> ..AIL. adpcm_vima LucasArts VIMA audio
>>>>> ..AIL. adpcm_xa ADPCM CDROM XA
>>>>> ..AIL. adpcm_yamaha ADPCM Yamaha
>>>>> ..AIL. adpcm_zork ADPCM Zork
>>>>> ..AIL. derf_dpcm DPCM Xilam DERF
>>>>> ..AIL. gremlin_dpcm DPCM Gremlin
>>>>> ..AIL. interplay_dpcm DPCM Interplay
>>>>> DEAIL. pcm_alaw PCM A-law / G.711 A-law
>>>>> D.AI.S pcm_bluray PCM signed 16|20|24-bit big-endian for
>>>>> Blu-ray media
>>>>> D.AI.S pcm_dvd PCM signed 20|24-bit big-endian
>>>>> ..AI.S pcm_f16le PCM 16.8 floating point little-endian
>>>>> ..AI.S pcm_f24le PCM 24.0 floating point little-endian
>>>>> DEAI.S pcm_f32be PCM 32-bit floating point big-endian
>>>>> DEAI.S pcm_f32le PCM 32-bit floating point little-endian
>>>>> DEAI.S pcm_f64be PCM 64-bit floating point big-endian
>>>>> DEAI.S pcm_f64le PCM 64-bit floating point little-endian
>>>>> ..AI.S pcm_lxf PCM signed 20-bit little-endian planar
>>>>> DEAIL. pcm_mulaw PCM mu-law / G.711 mu-law
>>>>> DEAI.S pcm_s16be PCM signed 16-bit big-endian
>>>>> DEAI.S pcm_s16be_planar PCM signed 16-bit big-endian planar
>>>>> DEAI.S pcm_s16le PCM signed 16-bit little-endian
>>>>> DEAI.S pcm_s16le_planar PCM signed 16-bit little-endian planar
>>>>> DEAI.S pcm_s24be PCM signed 24-bit big-endian
>>>>> ..AI.S pcm_s24daud PCM D-Cinema audio signed 24-bit
>>>>> DEAI.S pcm_s24le PCM signed 24-bit little-endian
>>>>> DEAI.S pcm_s24le_planar PCM signed 24-bit little-endian planar
>>>>> DEAI.S pcm_s32be PCM signed 32-bit big-endian
>>>>> DEAI.S pcm_s32le PCM signed 32-bit little-endian
>>>>> DEAI.S pcm_s32le_planar PCM signed 32-bit little-endian planar
>>>>> ..AI.S pcm_s64be PCM signed 64-bit big-endian
>>>>> ..AI.S pcm_s64le PCM signed 64-bit little-endian
>>>>> DEAI.S pcm_s8 PCM signed 8-bit
>>>>> DEAI.S pcm_s8_planar PCM signed 8-bit planar
>>>>> ..AI.S pcm_sga PCM SGA
>>>>> DEAI.S pcm_u16be PCM unsigned 16-bit big-endian
>>>>> DEAI.S pcm_u16le PCM unsigned 16-bit little-endian
>>>>> DEAI.S pcm_u24be PCM unsigned 24-bit big-endian
>>>>> DEAI.S pcm_u24le PCM unsigned 24-bit little-endian
>>>>> DEAI.S pcm_u32be PCM unsigned 32-bit big-endian
>>>>> DEAI.S pcm_u32le PCM unsigned 32-bit little-endian
>>>>> DEAI.S pcm_u8 PCM unsigned 8-bit
>>>>> ..AIL. pcm_vidc PCM Archimedes VIDC
>>>>> ..AIL. roq_dpcm DPCM id RoQ
>>>>> ..AIL. sdx2_dpcm DPCM Squareroot-Delta-Exact
>>>>> ..AIL. sol_dpcm DPCM Sol
>>>>> ..AIL. xan_dpcm DPCM Xan
>>>>>
>>>>
>>>> for me it says
>>>>
>>>> DEAI.S pcm_bluray PCM signed 16|20|24-bit big-endian for
>>>> Blu-ray media
>>>>
>>>>
>>>> on termux. Guess suse people a bit afraid about enabling anything
>>>> bluray related in widely-distributed packages. Just for checking you can
>>>> ask package maintainer, may be he (?) disabled it by oversight.
>>>>
>>>> So yeah, for this test self-compiled ffmpeg will be more interesting
>>>> (on x86/glibc system simple configure/make should give you ff* binaries)
>>>>
>>>>
>>>>
>>>>>
>>>> ======================
>>>>
>>>>
>>>> I upgraded instead my rolling openSUSE Tumbleweed with the recent
>>>> multimedia codec enabled ffmpeg 5.1.2 from Packman
>>>> https://opensuse.github.io/openSUSE-docs-revamped-temp/codecs/
>>>>
>>>> where also the pcm_bluray encoder is enabled:
>>>>
>>>> ffmpeg -codecs -hide_banner | grep pcm_bluray
>>>> DEAI.S pcm_bluray PCM signed 16|20|24-bit big-endian for
>>>> Blu-ray media
>>>>
>>>>
>>>> and verified first the input file
>>>>
>>>> ffprobe -hide_banner 3.m2t
>>>> Input #0, mpegts, from '3.m2t':
>>>> Duration: 00:00:03.10, start: 1.400000, bitrate: 21633 kb/s
>>>> Program 1
>>>> Metadata:
>>>> service_name : Service01
>>>> service_provider: FFmpeg
>>>> Stream #0:0[0x100]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002),
>>>> yuv420p(tv, bt709, top first), 1440x1080 [SAR 4:3 DAR 16:9], 25000 kb/s,
>>>> 29.97 fps, 29.97 tbr, 90k tbn
>>>> Side data:
>>>> cpb: bitrate max/min/avg: 25000000/0/0 buffer size: 7340032
>>>> vbv_delay: N/A
>>>> Stream #0:1[0x101]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz,
>>>> stereo, fltp, 384 kb/s
>>>>
>>>>
>>>> Then a new attempt with the first step to transcode the mp2 audio to
>>>> pcm_blu-ray.
>>>> Added also for this case the "-mpegts_m2ts_mode 1" switch for enabling
>>>> more bluray like output, because without it didn't seem to be recognized!?
>>>>
>>>>
>>>> ffmpeg -i 3.m2t -c:v copy -c:a pcm_bluray -mpegts_m2ts_mode 1 output.mts
>>>> ffmpeg version 5.1.2 Copyright (c) 2000-2022 the FFmpeg developers
>>>> built with gcc 12 (SUSE Linux)
>>>> ..........
>>>> Input #0, mpegts, from '3.m2t':
>>>> Duration: 00:00:03.10, start: 1.400000, bitrate: 21633 kb/s
>>>> Program 1
>>>> Metadata:
>>>> service_name : Service01
>>>> service_provider: FFmpeg
>>>> Stream #0:0[0x100]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002),
>>>> yuv420p(tv, bt709, top first), 1440x1080 [SAR 4:3 DAR 16:9], 25000 kb/s,
>>>> 29.97 fps, 29.97 tbr, 90k tbn
>>>> Side data:
>>>> cpb: bitrate max/min/avg: 25000000/0/0 buffer size: 7340032
>>>> vbv_delay: N/A
>>>> Stream #0:1[0x101]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz,
>>>> stereo, fltp, 384 kb/s
>>>> Stream mapping:
>>>> Stream #0:0 -> #0:0 (copy)
>>>> Stream #0:1 -> #0:1 (mp2 (native) -> pcm_bluray (native))
>>>> Press [q] to stop, [?] for help
>>>> Output #0, mpegts, to 'output.mts':
>>>> Metadata:
>>>> encoder : Lavf59.27.100
>>>> Stream #0:0: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002),
>>>> yuv420p(tv, bt709, top first), 1440x1080 [SAR 4:3 DAR 16:9], q=2-31, 25000
>>>> kb/s, 29.97 fps, 29.97 tbr, 90k tbn
>>>> Side data:
>>>> cpb: bitrate max/min/avg: 25000000/0/0 buffer size: 7340032
>>>> vbv_delay: N/A
>>>> Stream #0:1: Audio: pcm_bluray, 48000 Hz, stereo, s16, 128 kb/s
>>>> Metadata:
>>>> encoder : Lavc59.37.100 pcm_bluray
>>>> frame= 76 fps=0.0 q=-1.0 Lsize= 8898kB time=00:00:03.00
>>>> bitrate=24297.5kbits/s speed= 139x
>>>> video:7854kB audio:565kB subtitle:0kB other streams:0kB global
>>>> headers:0kB muxing overhead: 5.697285%
>>>>
>>>> ---------------------
>>>>
>>>> At last verified the output file:
>>>>
>>>> ffprobe -hide_banner output.ts
>>>> Input #0, mpegts, from 'output.ts':
>>>>
>>>
>>> above you output in mts not ts .... ?
>>>
>>>
>>>
>>> =======================
>>>
>>> It looks to be copy-error from my note. To be sure I repete it below
>>> for ffprobe and additional mediainfo. (I also had "output.ts" from the
>>> attempt without the mode switch.)
>>> Not sure if TS and MTS by the way can be used interchangeable, both are
>>> MPEG-transport streams, possibly TS is for MPEG-2 and MTS for H264/AVC only?
>>> My HDV files on disk get .M2T extension when transfered from tape.
>>>
>>
>>
>>
>> from output it seems audio is there? Can you hear it in vlc/mpv ?
>>
>>
>>
>> Yes, the "output.mts" audio can be heard ok via playback in vlc and mpv.
>>
>
>
>
> so, let stick to this specific 'extension' and hope ffmpeg behavior will
> not change!
>
> now attempt to use this *.mts file as input to bdwrite or tsmuxer ...
>
>
> =====================
>
> BDWRITE:
>
> Tried to follow the manual's 6 procedure steps to create a Blu-ray
> structure, but lost or mis-interpreted the paths(?) around steps 4-5,
> because I got an empty 12 directory-structure but 0 files?
>
> 1. du -sb /yourHDVfile.MTS
>
> du -sb output.mts
> 9111552 output.mts
>
>
put your output.mts in /tmp , or point bbwrite to exact location of
output.mts
yes, second run over same mountpoint/ file pair will fail ...
>
> 2. blocks=((size-in-bytes/2048 + 4096))
>
> (9111552/2048) + 4096 = 8545
>
> 3. mkudffs /tmp/newfilename.udfs blocks
>
> mkudffs /tmp/out
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20221107/58aa708a/attachment-0001.htm>
More information about the Cin
mailing list