[Cin] Capturing DV/HDV via Firewire

[Andrew Randrianasulu]

пт, 24 февр. 2023 г., 14:25 Terje J. Hanssen <terjejhanssen at gmail.com>:

> Happily, the DN-300 came back from the dead and is currently converting
> and recording S-video to DV again, though it somewhat fickly to get mounted
> "HDD enabled" via Firewire to Linux  :).
>


\o/ I hope box will remain undead for at least as long as needed for all
works and tests :)

>
> Den 19.02.2023 17:15, skrev Terje J. Hanssen:
>
>
>
> Den 19.02.2023 16:54, skrev Phyllis Smith:
>
> Terje,
> I can say with 100% certainty that here we have never tested FIREWIRE but
> I did notice that the CV contributors did add "ifdef FIREWIRE" in a few of
> the .C programs which conceivably means that it can be built with the
> capability. However, I guess I do not understand why you would want this
> option since you stated:
>    "The reason is my 10 years old FireWire based DV/HDV recorder seemingly
> is dead."
>
>
> Sony FX7/HDV tape Playback/i.LINK -> Datavideo DN-300 DV/HDV HDD recorder
> -> FireWire/Linux WS
>
> Now when the M2T and DV recorder in the middle is dead, I have to transfer
> the files directly from the camcorder/player to the Linux WS.
>
> Terje
>
>
> Recently I successfully was able to do:  "Transfer VHS/DVD Media or
> Video8/Hi8 Tapes into CINELERRA-GG" though.
>
>> Does this mean that Firewire/dv capture already is supported or optional
>>> can be configured?
>>>
>>
>>
>> it was not tested in ages .....
>> guess try to install all -dev version of libraries and look at output of
>> cingg's configure .... then connect device and try to set capture device to
>> iec* ....
>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20230224/0fa2d0c9/attachment.htm>