[Cin] ms2130 HDMI-USB3 UHD capture card - not quite as expected?
Terje J. Hanssen
terjejhanssen at gmail.com
Sat Feb 25 21:25:15 CET 2023
Den 25.02.2023 19:27, skrev Andrew Randrianasulu:
>
>
> сб, 25 февр. 2023 г., 21:19 Terje J. Hanssen via Cin
> <cin at lists.cinelerra-gg.org>:
>
> So I have received the ms2130 HDMI-USB3 capture card.
> The A/D AV converter & SV-HDMI/adapter is not received so far, and
> I have not avialable my HDV camcorder (on service) to output HDMI
> video stream with.
>
> Yet, I have initially run some verification tests on the ms2130
> HDMI-USB3 UHD capture card alone, for what they are worth.
>
> As "UHD" (and/or USB3) is mostly generic used to identify this
> card (while ms2130 almost not), the some output is piped and
> stripped with grep "UHD".
>
> ----------------
>
> dmesg | grep UHD
> [ 2.798210] usb 2-5: Product: USB3.0 UHD
> [ 2.827772] hid-generic 0003:345F:2130.0005:
> hiddev97,hidraw4: USB HID v1.10 Device [MACROSILICON USB3.0
> UHD] on usb-0000:00:14.0-5/input4
> [ 4.805554] usb 2-5: Found UVC 1.00 device USB3.0 UHD
> (345f:2130)
>
>
> udevadm info /dev/video* | egrep 'DEVNAME|ID_V4L_PRODUCT'
> E: DEVNAME=/dev/video0
> E: ID_V4L_PRODUCT=USB 2.0 Camera: HD 720P Webcam
> E: DEVNAME=/dev/video1
> E: ID_V4L_PRODUCT=USB 2.0 Camera: HD 720P Webcam
> E: DEVNAME=/dev/video2
> E: ID_V4L_PRODUCT=USB3.0 UHD: USB3.0 UHD
> E: DEVNAME=/dev/video3
> E: ID_V4L_PRODUCT=USB3.0 UHD: USB3.0 UHD
>
>
> udevadm info /dev/video* | egrep UHD
> S: v4l/by-id/usb-MACROSILICON_USB3.0_UHD_20210623-video-index0
> E: ID_V4L_PRODUCT=USB3.0 UHD: USB3.0 UHD
> E: ID_MODEL=USB3.0_UHD
> E: ID_MODEL_ENC=USB3.0\x20UHD
> E: ID_SERIAL=MACROSILICON_USB3.0_UHD_20210623
> E:
> DEVLINKS=/dev/v4l/by-id/usb-MACROSILICON_USB3.0_UHD_20210623-video-index0
> /dev/v4l/by-path/pci-0000:00:14.0-usb-0:5:1.0-video-index0
> S: v4l/by-id/usb-MACROSILICON_USB3.0_UHD_20210623-video-index1
> E: ID_V4L_PRODUCT=USB3.0 UHD: USB3.0 UHD
> E: ID_MODEL=USB3.0_UHD
> E: ID_MODEL_ENC=USB3.0\x20UHD
> E: ID_SERIAL=MACROSILICON_USB3.0_UHD_20210623
> E:
> DEVLINKS=/dev/v4l/by-path/pci-0000:00:14.0-usb-0:5:1.0-video-index1
> /dev/v4l/by-id/usb-MACROSILICON_USB3.0_UHD_20210623-video-index1
>
>
> lsusb | grep UHD
> Bus 002 Device 004: ID 345f:2130 MACROSILICON USB3.0 UHD
>
> cat /proc/asound/cards | grep UHD
> 2 [UHD ]: USB-Audio - USB3.0 UHD
> MACROSILICON USB3.0 UHD at
> usb-0000:00:14.0-5, super speed
>
> ll /dev/video*
> crw-rw----+ 1 root video 81, 0 feb. 25 14:15 /dev/video0
> crw-rw----+ 1 root video 81, 1 feb. 25 14:15 /dev/video1
> crw-rw----+ 1 root video 81, 2 feb. 25 14:15 /dev/video2
> crw-rw----+ 1 root video 81, 3 feb. 25 14:15 /dev/video3
>
> ---------------------
>
> v4l2-ctl --list-devices
> USB 2.0 Camera: HD 720P Webcam (usb-0000:00:14.0-11):
> /dev/video0
> /dev/video1
>
> USB3.0 UHD: USB3.0 UHD (usb-0000:00:14.0-5):
> /dev/video2
> /dev/video3
>
> -----------
>
> v4l2-ctl --list-formats-ext
> ioctl: VIDIOC_ENUM_FMT
> Index : 0
> Type : Video Capture
> Pixel Format: 'YUYV'
> Name : YUYV 4:2:2
> Size: Discrete 640x480
> Interval: Discrete 0.030s (33.000 fps)
> Interval: Discrete 0.067s (15.000 fps)
> Size: Discrete 1280x720
> Interval: Discrete 0.100s (10.000 fps)
> Size: Discrete 640x360
> Interval: Discrete 0.030s (33.000 fps)
> Interval: Discrete 0.067s (15.000 fps)
> ................
> Index : 1
> Type : Video Capture
> Pixel Format: 'MJPG' (compressed)
> Name : Motion-JPEG
> Size: Discrete 640x480
> Interval: Discrete 0.030s (33.000 fps)
> Interval: Discrete 0.067s (15.000 fps)
> Size: Discrete 1280x720
> Interval: Discrete 0.030s (33.000 fps)
> Interval: Discrete 0.067s (15.000 fps)
> Size: Discrete 640x360
> Interval: Discrete 0.030s (33.000 fps)
> Interval: Discrete 0.067s (15.000 fps)
> ......................
>
>
>
> As the above doesn't list any 1920x1080 resolution, I wonder if it
> list just format for the usb2 webcam and not for ms2130 capture card?
>
>
>
> Yeah, looking at how webcam listed first it makes sense. Try to
> instruct v4l2-ctl to use another device? (my guess it will be "-d"
> switch but I can be wrong! Manyal or "--help" output is better guide ..)
Be aware that "v4l2-ctl --list-formats-ext" was the same (I think) as
used for the previous ms2109 Hama card, and I thought formats for all
connected devices were listed then.
Obviously there is a default (or first device) used, when no device is
specified, so thank you for the tip.
By help of google and "superuser" I found out that actually both "-D -d
/dev/video2" are needed to get both frame sizes and fps listed:
v4l2-ctl -D -d /dev/video2 --list-formats-ext
Driver Info (not using libv4l2):
Driver name : uvcvideo
Card type : USB3.0 UHD: USB3.0 UHD
Bus info : usb-0000:00:14.0-5
Driver version: 5.14.21
Capabilities : 0x84A00001
Video Capture
Metadata Capture
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04200001
Video Capture
Streaming
Extended Pix Format
ioctl: VIDIOC_ENUM_FMT
Index : 0
Type : Video Capture
Pixel Format: 'YUYV'
Name : YUYV 4:2:2
Size: Discrete 1920x1080
Interval: Discrete 0.017s (60.000 fps)
Interval: Discrete 0.020s (50.000 fps)
Interval: Discrete 0.033s (30.000 fps)
Interval: Discrete 0.050s (20.000 fps)
Interval: Discrete 0.100s (10.000 fps)
............
Size: Discrete 1280x720
Interval: Discrete 0.017s (60.000 fps)
Interval: Discrete 0.020s (50.000 fps)
Interval: Discrete 0.033s (30.000 fps)
Interval: Discrete 0.050s (20.000 fps)
Interval: Discrete 0.100s (10.000 fps)
...............
Size: Discrete 720x576
Interval: Discrete 0.017s (60.000 fps)
Interval: Discrete 0.020s (50.000 fps)
Interval: Discrete 0.033s (30.000 fps)
Interval: Discrete 0.050s (20.000 fps)
Interval: Discrete 0.100s (10.000 fps)
................
>
> -------------------------------------
>
> Try also ffplay to list supported formats for a video4linux2 device:
>
> ffplay -hide_banner -f v4l2 -list_formats all /dev/video2
> [video4linux2,v4l2 @ 0x7f8280000cc0] Raw : yuyv422
> : YUYV 4:2:2 : 1920x1080 1600x1200 1360x768
> 1280x1024 1280x960 1280x720 1024x768 800x600 720x576 720x480
> 640x480
> /dev/video2: Immediate exit requested
> nan : 0.000 fd= 0 aq= 0KB vq= 0KB sq= 0B f=0/0
>
>
>
> this one at least list all formats but not their framerates ...
>
>
>
>
> ffplay -hide_banner -f v4l2 -list_formats all /dev/video3
> [video4linux2,v4l2 @ 0x7f3bd0000cc0] ioctl(VIDIOC_G_INPUT):
> Inappropriate ioctl for device
> /dev/video3: Inappropriate ioctl for device
>
>
> -------------
>
> I am not sure about what the following command really does, but it
> was described to
>
> "Grab and record the input of a video4linux2 device, leave the
> frame rate and size as previously set:"
>
> ffmpeg -hide_banner -f v4l2 -input_format yuyv422 -i
> /dev/video2 out_test.mpeg
>
> [video4linux2,v4l2 @ 0x55c22212cfc0] Dequeued v4l2 buffer
> contains corrupted data (0 bytes).
> Input #0, video4linux2,v4l2, from '/dev/video2':
> Duration: N/A, start: 0.000000, bitrate: 1990656 kb/s
> Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422,
> 1920x1080, 1990656 kb/s, 60 fps, 60 tbr, 1000k tbn
> Stream mapping:
> Stream #0:0 -> #0:0 (rawvideo (native) -> mpeg1video (native))
> Press [q] to stop, [?] for help
> [video4linux2,v4l2 @ 0x55c22212cfc0] Dequeued v4l2 buffer
> contains corrupted data (0 bytes).
> Last message repeated 30 times
> [mpeg @ 0x55c22214f800] VBV buffer size not set, using default
> size of 230KB
> If you want the mpeg file to be compliant to some specification
> Like DVD, VCD or others, make sure you set the correct buffer size
> Output #0, mpeg, to 'out_test.mpeg':
> Metadata:
> encoder : Lavf59.27.100
> Stream #0:0: Video: mpeg1video, yuv420p(tv, progressive),
> 1920x1080, q=2-31, 200 kb/s, 60 fps, 90k tbn
> Metadata:
> encoder : Lavc59.37.100 mpeg1video
> Side data:
> cpb: bitrate max/min/avg: 0/0/200000 buffer size: 0
> vbv_delay: N/A
> frame= 1628 fps= 60 q=2.0 Lsize= 4702kB time=03:13:19.68
> bitrate= 3.3kbits/s speed= 427x
> video:4675kB audio:0kB subtitle:0kB other streams:0kB global
> headers:0kB muxing overhead: 0.572162%
> Exiting normally, received signal 2.
>
>
>
> try 30 fps instead of 60?
Like this?
But shouldn't a 422 and not a 420 output format be created?
ffmpeg -hide_banner -f v4l2 -input_format yuyv422 -video_size
1920x1080 -framerate 30 -t 10 -i /dev/video2 out_1920x1024.mpeg
[video4linux2,v4l2 @ 0x564d7d7c3040] Dequeued v4l2 buffer contains
corrupted data (0 bytes).
Input #0, video4linux2,v4l2, from '/dev/video2':
Duration: N/A, start: 0.000000, bitrate: 995328 kb/s
Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422,
1920x1080, 995328 kb/s, 30 fps, 30 tbr, 1000k tbn
Stream mapping:
Stream #0:0 -> #0:0 (rawvideo (native) -> mpeg1video (native))
Press [q] to stop, [?] for help
[video4linux2,v4l2 @ 0x564d7d7c3040] Dequeued v4l2 buffer contains
corrupted data (0 bytes).
Last message repeated 30 times
[mpeg @ 0x564d7d7e5a80] VBV buffer size not set, using default size
of 230KB
If you want the mpeg file to be compliant to some specification
Like DVD, VCD or others, make sure you set the correct buffer size
Output #0, mpeg, to 'out_1920x1024.mpeg':
Metadata:
encoder : Lavf59.27.100
Stream #0:0: Video: mpeg1video, yuv420p(tv, progressive),
1920x1080, q=2-31, 200 kb/s, 30 fps, 90k tbn
Metadata:
encoder : Lavc59.37.100 mpeg1video
Side data:
cpb: bitrate max/min/avg: 0/0/200000 buffer size: 0
vbv_delay: N/A
frame= 301 fps= 30 q=1.6 Lsize= 896kB time=06:56:05.30
bitrate= 0.3kbits/s speed=2.47e+03x
video:890kB audio:0kB subtitle:0kB other streams:0kB global
headers:0kB muxing overhead: 0.710403%
-----------
ffprobe -hide_banner out_1920x1024.mpeg
Input #0, mpeg, from 'out_1920x1024.mpeg':
Duration: 00:00:10.03, start: 24955.333333, bitrate: 731 kb/s
Stream #0:0[0x1e0]: Video: mpeg1video, yuv420p(tv), 1920x1080
[SAR 1:1 DAR 16:9], 104857 kb/s, 30 fps, 30 tbr, 90k tbn
------------
mediainfo out_1920x1024.mpeg
General
Complete name : out_1920x1024.mpeg
Format : MPEG-PS
File size : 896 KiB
Duration : 10 s 33 ms
Overall bit rate mode : Variable
Overall bit rate : 732 kb/s
Video
ID : 224 (0xE0)
Format : MPEG Video
Format version : Version 1
Format settings, BVOP : No
Format settings, Matrix : Default
Format settings, GOP : N=12
Duration : 10 s 33 ms
Bit rate mode : Variable
Bit rate : 717 kb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 30.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.012
Time code of first frame : 00:00:00:00
Time code source : Group of pictures header
GOP, Open/Closed : Open
GOP, Open/Closed of first frame : Closed
Stream size : 878 KiB (98%)
>
>
>
>
> --
> Cin mailing list
> Cin at lists.cinelerra-gg.org
> https://lists.cinelerra-gg.org/mailman/listinfo/cin
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20230225/5a747a0a/attachment-0001.htm>
More information about the Cin
mailing list