[Cin] FFmpeg supported QSV pixel formats and profiles
Andrew Randrianasulu
randrianasulu at gmail.com
Sat Oct 12 21:48:41 CEST 2024
сб, 12 окт. 2024 г., 22:45 Andrew Randrianasulu <randrianasulu at gmail.com>:
>
>
> сб, 12 окт. 2024 г., 22:36 Terje J. Hanssen <terjejhanssen at gmail.com>:
>
>>
>>
>>
>> Den 12.10.2024 21:26, skrev Andrew Randrianasulu:
>>
>>
>>
>> сб, 12 окт. 2024 г., 22:19 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>
>>>
>>>
>>>
>>> Den 12.10.2024 19:56, skrev Andrew Randrianasulu:
>>>
>>>
>>>
>>> сб, 12 окт. 2024 г., 20:45 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>>
>>>>
>>>>
>>>>
>>>> Den 12.10.2024 18:43, skrev Andrew Randrianasulu:
>>>>
>>>>
>>>>
>>>> сб, 12 окт. 2024 г., 16:59 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>>>
>>>>>
>>>>>
>>>>> Den 12.10.2024 15:09, skrev Terje J. Hanssen:
>>>>>
>>>>>
>>>>>
>>>>> Den 12.10.2024 14:39, skrev Andrew Randrianasulu:
>>>>>
>>>>>
>>>>>
>>>>> сб, 12 окт. 2024 г., 13:23 Terje J. Hanssen via Cin <
>>>>> cin at lists.cinelerra-gg.org>:
>>>>>
>>>>>>
>>>>>>
>>>>>> Den 12.10.2024 12:08, skrev Terje J. Hanssen:
>>>>>>
>>>>>> An overview over the system FFmpeg 7.x supported QSV pixel formats
>>>>>> and profiles:
>>>>>>
>>>>>>
>>>>>> ffmpeg -hide_banner -h encoder=hevc_qsv | egrep
>>>>>> 'Supported|profile|main'
>>>>>> Supported hardware devices: qsv qsv qsv
>>>>>> Supported pixel formats: nv12 p010le p012le yuyv422 y210le qsv
>>>>>> bgra x2rgb10le vuyx xv30le
>>>>>> -profile <int> E..V....... (from 0 to INT_MAX)
>>>>>> (default unknown)
>>>>>> main 1 E..V.......
>>>>>> main10 2 E..V.......
>>>>>> mainsp 3 E..V.......
>>>>>> main 0 E..V.......
>>>>>>
>>>>>>
>>>>>> ffmpeg -hide_banner -h encoder=h264_qsv | egrep
>>>>>> 'Supported|profile|main'
>>>>>> Supported hardware devices: qsv qsv qsv
>>>>>> Supported pixel formats: nv12 qsv
>>>>>> -profile <int> E..V....... (from 0 to INT_MAX)
>>>>>> (default unknown)
>>>>>> main 77 E..V.......
>>>>>>
>>>>>>
>>>>> I think we can concentrate on av1 for now.
>>>>>
>>>>> does it fail if you add "-profile main" to ffmpeg command line for dv
>>>>> av1 encode?
>>>>>
>>>>> dv due to it being software codec, so ffmpeg forced to push and
>>>>> convert frames from system memory, as opposed to hdv (hw) = > av1 on-gpu
>>>>> transcode)
>>>>>
>>>>>
>>>>> No, it doesn't fail:
>>>>>
>>>>>
>>>>> but claims:
>>>>> "Please use -profile:a or -profile:v, -profile is ambiguous"
>>>>>
>>>>
>>>>
>>>> ah, I think it mostly relevant to ffmpeg as cli application.
>>>>
>>>> Now, moving to cingg, does adding
>>>>
>>>> preset 4
>>>> b 1570k
>>>>
>>>> into profile file
>>>>
>>>> fix anything?
>>>>
>>>> you can change loglevel to debug in bin/ffmpeg/encode.opts too, it will
>>>> produce bugger log, hopefully with more detailed error msg.
>>>>
>>>>
>>>>
>>>> Sorry, the same error as before:
>>>>
>>>> localhost:/home/cinelerra/cinelerra-5.1/bin/ffmpeg # cat encode.opts
>>>> # apply at init encode
>>>> #loglevel=error
>>>> loglevel=debug
>>>> threads=auto
>>>> side_data_only_packets=1
>>>>
>>>> # cd /home/cinelerra/cinelerra-5.1
>>>>
>>>> bin/cin
>>>>
>>>> Load recent: dv01_07.dv
>>>> Render to: /Videoklipp/QSV/dv01_07_av1_qsv.mp4
>>>> FFMPEG mp4
>>>> Video wrench: Video Preset
>>>> compression: av1_qsv.mp4
>>>> Pixels: nv12
>>>> preset 4
>>>> b 1570k
>>>>
>>>> Cinelerra Message log:
>>>> int FFMPEG::init_encoder(const char*):
>>>> mismatch audio/video file format: /Videoklipp/QSV/dv01_07_av1_qsv.mp4
>>>> Cinelerra Error (widgets)
>>>> Couldn't open /Videoklipp/QSV/dv01 07 av1 qsv.mp4
>>>> Error rendering data
>>>>
>>>> Render::render_single: Session finished.
>>>>
>>>
>>> what kind of audio compression you use?
>>>
>>>
>>> Audio preset was set to h264.mp4
>>> tried also h265.mp4 without any change
>>> there is no aac available for av1_qsv
>>>
>>>
>>> may be set video profile to something else, then set in gui both
>>> av1_qsv.mp4 and relevant audio like aac?
>>>
>>>
>>> Ok, I misunderstood when I tried something quite else below, software
>> av1_svt.webm below.
>> Should aac audio be available for av1_qsv.mp4, I couldn't see it?
>>
>
>
> it hides behind h264.mp4 audio profile ....
>
>
> but can you check two more things with cmd line ffmpeg?
>
>
> first change .webm part of working command line to .mp4
>
> try it and report if and how it fail
>
> and then to mkv
>
> also report if it work or not.
>
> so we will try more common (for now ) container formats for av1, may be
> 7.0 simply can't make AV1 IN mp4 container ....?
>
>
> sorry for such long road ...
>
>
>>
>> Rendered also to av1_svt.webm that worked as shown below. Then back again
>>> to av1_qsv.mp4 from scratch, but got the same error.
>>>
>>> Load recent: dv01_07.dv
>>> Render to: /Videoklipp/QSV/dv01_07_av1_svt.webm
>>> -----------
>>> FFMPEG webm
>>> Audio preset: opus.webm
>>> Video Preset
>>> compression: av1_svt.webm
>>> Pixels: yuv420p
>>> preset 4
>>> b 1570k
>>> ----------
>>> Svt[warn]: Failed to set thread priority: Invalid argument
>>> [SWR @ 0x7f7b47452b00] Using fltp internally between filters
>>> [libopus @ 0x7f7b473d2500] No bit rate set. Defaulting to 96000 bps.
>>> FFStream::encode_frame: encode failed.
>>> file: /Videoklipp/QSV/dv01_07_av1_svt.webm
>>> err: Resource temporarily unavailable
>>> FFStream::flush failed
>>> :file:/Videoklipp/QSV/dv01_07_av1_svt.webm
>>> err: Operation not permitted
>>> FFStream::encode_frame: encode failed.
>>> file: /Videoklipp/QSV/dv01_07_av1_svt.webm
>>> err: Resource temporarily unavailable
>>> FFStream::flush failed
>>> :file:/Videoklipp/QSV/dv01_07_av1_svt.webm
>>> err: Operation not permitted
>>> Svt[error]: deinit called without sending EOS!
>>> Render::render_single: Session finished.
>>> ** rendered 2832 frames in 109.469 secs, 25.870 fps
>>> FFMPEG::open_decoder: some stream times estimated:
>>> /Videoklipp/QSV/dv01_07_av1_svt.webm
>>> FFMPEG::open_decoder: some stream times estimated:
>>> /Videoklipp/QSV/dv01_07_av1_svt.webm
>>> audio0 pad 32 -335 (367)
>>> FFMPEG::open_decoder: some stream times estimated:
>>> /Videoklipp/QSV/dv01_07_av1_svt.webm
>>> FFMPEG::open_decoder: some stream times estimated:
>>> /Videoklipp/QSV/dv01_07_av1_svt.webm
>>> Total excess of backups: -50
>>> Session time: 0:27:05
>>> Cpu time: user: 0:10:21.894 sys: 0:00:10.195
>>>
>>
>>
>> to be honest this log does not show SAME error about mismatching format,
>> so it probably was only first half.
>>
>> can you try to cut av1_qsv.mp4 back to just first non-comment line?
>>
>>
>> I don't understand:
>> Can you explain "cut av1_qsv.mp4 back to just first non-comment line"
>> ....?
>>
>
just open it with editor as text file, remove all but very first line where
it says
mp4 av1_qsv
but I think we trying something unsupported here ....
>>
>>
>>>
>>>
>>>
>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>> ffmpeg -hide_banner -hwaccel_output_format qsv -qsv_device
>>>>> /dev/dri/renderD128 -i dv01_07.dv -c:v av1_qsv -preset 4 -profile main -b:v
>>>>> 1570k dv01_07_av1_qsv_main_pr4_bv1570k.webm
>>>>> libva info: VA-API version 1.22.0
>>>>> libva info: Trying to open /usr/lib64/dri/iHD_drv_video.so
>>>>> libva info: Found init function __vaDriverInit_1_22
>>>>> libva info: va_openDriver() returns 0
>>>>> libva info: VA-API version 1.22.0
>>>>> libva info: Trying to open /usr/lib64/dri/iHD_drv_video.so
>>>>> libva info: Found init function __vaDriverInit_1_22
>>>>> libva info: va_openDriver() returns 0
>>>>> [dv @ 0x5606d5914c00] Estimating duration from bitrate, this may be
>>>>> inaccurate
>>>>> Input #0, dv, from 'dv01_07.dv':
>>>>> Metadata:
>>>>> timecode : 01:09:35:09
>>>>> Duration: 00:01:53.28, start: 0.000000, bitrate: 28800 kb/s
>>>>> Stream #0:0: Video: dvvideo, yuv420p, 720x576 [SAR 16:15 DAR 4:3],
>>>>> 28800 kb/s, 60k fps, 25 tbr, 60k tbn
>>>>> Stream #0:1: Audio: pcm_s16le, 48000 Hz, stereo, s16, 1536 kb/s
>>>>> Please use -profile:a or -profile:v, -profile is ambiguous
>>>>> Stream mapping:
>>>>> Stream #0:0 -> #0:0 (dvvideo (native) -> av1 (av1_qsv))
>>>>> Stream #0:1 -> #0:1 (pcm_s16le (native) -> opus (libopus))
>>>>> Press [q] to stop, [?] for help
>>>>> [libopus @ 0x5606d5ac5100] No bit rate set. Defaulting to 96000 bps.
>>>>> Output #0, webm, to 'dv01_07_av1_qsv_main_pr4_bv1570k.webm':
>>>>> Metadata:
>>>>> timecode : 01:09:35:09
>>>>> encoder : Lavf61.1.100
>>>>> Stream #0:0: Video: av1, nv12(bottom coded first (swapped)), 720x576
>>>>> [SAR 16:15 DAR 4:3], q=2-31, 1570 kb/s, 25 fps, 1k tbn
>>>>> Metadata:
>>>>> encoder : Lavc61.3.100 av1_qsv
>>>>> Stream #0:1: Audio: opus, 48000 Hz, stereo, s16, 96 kb/s
>>>>> Metadata:
>>>>> encoder : Lavc61.3.100 libopus
>>>>> [out#0/webm @ 0x5606d591cf40] video:22613KiB audio:1186KiB
>>>>> subtitle:0KiB other streams:0KiB global headers:0KiB muxing overhead:
>>>>> 0.223557%
>>>>> frame= 2832 fps=1764 q=-0.0 Lsize= 23852KiB time=00:01:53.24
>>>>> bitrate=1725.5kbits/s speed=70.5x
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>
>>>>>> hevc_qsv and h264_qsv encoders also have "high" profile:
>>>>>>
>>>>>>
>>>>>> ffmpeg -hide_banner -h encoder=hevc_qsv | egrep
>>>>>> 'Supported|profile|main|high'
>>>>>> Supported hardware devices: qsv qsv qsv
>>>>>> Supported pixel formats: nv12 p010le p012le yuyv422 y210le qsv
>>>>>> bgra x2rgb10le vuyx xv30le
>>>>>> -profile <int> E..V....... (from 0 to INT_MAX)
>>>>>> (default unknown)
>>>>>> main 1 E..V.......
>>>>>> main10 2 E..V.......
>>>>>> mainsp 3 E..V.......
>>>>>> -tier <int> E..V....... Set the encoding tier
>>>>>> (only level >= 4 can support high tier) (from 0 to 256) (default high)
>>>>>> main 0 E..V.......
>>>>>> high 256 E..V.......
>>>>>>
>>>>>>
>>>>>> ffmpeg -hide_banner -h encoder=h264_qsv | egrep
>>>>>> 'Supported|profile|main|high'
>>>>>> Supported hardware devices: qsv qsv qsv
>>>>>> Supported pixel formats: nv12 qsv
>>>>>> -profile <int> E..V....... (from 0 to INT_MAX)
>>>>>> (default unknown)
>>>>>> main 77 E..V.......
>>>>>> high 100 E..V.......
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> ffmpeg -hide_banner -h encoder=av1_qsv | egrep
>>>>>> 'Supported|profile|main'
>>>>>> Supported hardware devices: qsv qsv qsv
>>>>>> Supported pixel formats: nv12 p010le qsv
>>>>>> -profile <int> E..V....... (from 0 to INT_MAX)
>>>>>> (default unknown)
>>>>>> main 1 E..V.......
>>>>>>
>>>>>>
>>>>>> ffmpeg -hide_banner -h encoder=vp9_qsv | egrep
>>>>>> 'Supported|profile|main'
>>>>>> Supported hardware devices: qsv qsv qsv
>>>>>> Supported pixel formats: nv12 p010le vuyx qsv xv30le
>>>>>> -profile <int> E..V....... (from 0 to INT_MAX)
>>>>>> (default unknown)
>>>>>> profile0 1 E..V.......
>>>>>> profile1 2 E..V.......
>>>>>> profile2 3 E..V.......
>>>>>> profile3 4 E..V.......
>>>>>>
>>>>>>
>>>>>> ffmpeg -hide_banner -h encoder=vp9_qsv | egrep 'Supported|main'
>>>>>> Supported hardware devices: qsv qsv qsv
>>>>>> Supported pixel formats: nv12 p010le vuyx qsv xv30le
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Cin mailing list
>>>>>> Cin at lists.cinelerra-gg.org
>>>>>> https://lists.cinelerra-gg.org/mailman/listinfo/cin
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20241012/32c82643/attachment-0001.htm>
More information about the Cin
mailing list