[Cin] 10bit VAAPI encoding test thread
Andrew Randrianasulu
randrianasulu at gmail.com
Sun Oct 27 16:35:09 CET 2024
вс, 27 окт. 2024 г., 18:30 Terje J. Hanssen <terjejhanssen at gmail.com>:
>
>
>
> Den 27.10.2024 16:21, skrev Andrew Randrianasulu:
>
>
>
> вс, 27 окт. 2024 г., 13:17 Terje J. Hanssen <terjejhanssen at gmail.com>:
>
>>
>>
>>
>> Den 26.10.2024 01:37, skrev Andrew Randrianasulu:
>>
>>
>>
>> On Sat, Oct 26, 2024 at 2:14 AM Andrew Randrianasulu <
>> randrianasulu at gmail.com> wrote:
>>
>>>
>>>
>>> On Sat, Oct 26, 2024 at 1:29 AM Andrew Randrianasulu <
>>> randrianasulu at gmail.com> wrote:
>>>
>>>>
>>>>
>>>> сб, 26 окт. 2024 г., 00:58 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>>>
>>>>>
>>>>>
>>>>>
>>>>> Den 25.10.2024 21:48, skrev Andrew Randrianasulu:
>>>>>
>>>>> We branching!
>>>>>
>>>>> I looked at gpu-screen-recorder
>>>>>
>>>>>
>>>>> https://git.dec05eba.com/gpu-screen-recorder/tree/src/encoder/video/vaapi.c
>>>>>
>>>>> it sets
>>>>>
>>>>> AVHWFramesContext *hw_frame_context = (AVHWFramesContext*)frame_context->data;
>>>>> hw_frame_context->width = video_codec_context->width;
>>>>> hw_frame_context->height = video_codec_context->height;
>>>>> hw_frame_context->sw_format = self->params.color_depth == GSR_COLOR_DEPTH_10_BITS ? AV_PIX_FMT_P010LE : AV_PIX_FMT_NV12;
>>>>> hw_frame_context->format = video_codec_context->pix_fmt;
>>>>> hw_frame_context->device_ctx = (AVHWDeviceContext*)self->device_ctx->data;
>>>>>
>>>>> so may be we need to set AV_PIX_FMT_P010LE and not just P010?
>>>>>
>>>>>
>>>>> Sorry, It didn't render more than 8bit yuv420p
>>>>>
>>>>
>>>>
>>>> yeahh ... probably need more debugging (seeing what pixel format goes
>>>> into ffmpeg vaapi interface at least).
>>>>
>>>> I only have decoding on nouveau, and quite flaky at that - only 2 files
>>>> so far worked w,/o crashing, from around 2011/12.
>>>>
>>>>
>>>> I tried to change two instances of NV12 to P010LE and it shows no
>>>> visible effect, so I assume it was supposed to work with encoding ...?
>>>>
>>>> it does not work even with qsv set to p010 AND patch ?
>>>>
>>>> if so, I am afraid I only can put this item on shelf ... for now. Look
>>>> at mantis bug database, if there is no entry about 10bit vaapi
>>>> deciding/encoding - add it please ....
>>>>
>>>> you can also test (at some point in time ) this gpu_screen_recorder, it
>>>> builds but does not work for me due to "nouveau" driver.
>>>>
>>>>
>>>
>>> at least with another patch (attached) I can get this:
>>>
>>> bash-5.1$ bin/cin ~/6029.mp4
>>> Cinelerra Infinity - built: Oct 17 2024 16:18:31
>>> git://git.cinelerra-gg.org/goodguy/cinelerra.git
>>> (c) 2006-2019 Heroine Virtual Ltd. by Adam Williams
>>> 2007-2020 mods for Cinelerra-GG by W.P.Morrow aka goodguy
>>> 2003-2017 mods for Cinelerra-CV by CinelerraCV team
>>> 2015-2024 mods for Cinelerra-GG by Cinelerra-GG team
>>>
>>> Libav version: Lavc61.3.100
>>>
>>> Cinelerra is free software, covered by the GNU General Public License,
>>> and you are welcome to change it and/or distribute copies of it under
>>> certain conditions. There is absolutely no warranty for Cinelerra.
>>>
>>> RenderFarmClient::main_loop: client started
>>> [AVHWDeviceContext @ 0xf925c00] Trying to use DRM render node for device
>>> 0.
>>> [AVHWDeviceContext @ 0xf925c00] libva: VA-API version 1.19.0
>>> [AVHWDeviceContext @ 0xf925c00] libva: Trying to open
>>> /usr/lib/dri/nouveau_drv_video.so
>>> [AVHWDeviceContext @ 0xf925c00] libva: Found init function
>>> __vaDriverInit_1_19
>>> [AVHWDeviceContext @ 0xf925c00] libva: va_openDriver() returns 0
>>> [AVHWDeviceContext @ 0xf925c00] Initialised VAAPI connection: version
>>> 1.19
>>> [AVHWDeviceContext @ 0xf925c00] Format 0x3231564e -> nv12.
>>> [AVHWDeviceContext @ 0xf925c00] Format 0x30313050 -> p010le.
>>> [AVHWDeviceContext @ 0xf925c00] Format 0x36313050 -> unknown.
>>> [AVHWDeviceContext @ 0xf925c00] Format 0x30323449 -> yuv420p.
>>> [AVHWDeviceContext @ 0xf925c00] Format 0x32315659 -> yuv420p.
>>> [AVHWDeviceContext @ 0xf925c00] Format 0x56595559 -> unknown.
>>> [AVHWDeviceContext @ 0xf925c00] Format 0x32595559 -> yuyv422.
>>> [AVHWDeviceContext @ 0xf925c00] Format 0x59565955 -> uyvy422.
>>> [AVHWDeviceContext @ 0xf925c00] Format 0x41524742 -> bgra.
>>> [AVHWDeviceContext @ 0xf925c00] Format 0x41424752 -> rgba.
>>> [AVHWDeviceContext @ 0xf925c00] Format 0x58524742 -> bgr0.
>>> [AVHWDeviceContext @ 0xf925c00] Format 0x58424752 -> rgb0.
>>> [AVHWDeviceContext @ 0xf925c00] VAAPI driver: Mesa Gallium driver 22.1.7
>>> for NV106.
>>> [AVHWDeviceContext @ 0xf925c00] Driver not found in known nonstandard
>>> list, using standard behaviour.
>>> [AVHWFramesContext @ 0xea43980] Created surface 0x1.
>>> [AVHWFramesContext @ 0xea43980] Direct mapping possible.
>>> [av1_vaapi @ 0xf978680] Input surface format is p010le.
>>> [av1_vaapi @ 0xf978680] Compatible profile VAProfileAV1Profile0 (32) is
>>> not supported by driver.
>>> [av1_vaapi @ 0xf978680] No usable encoding profile found.
>>> FFMPEG::open_encoder err: Function not implemented
>>> int FFMPEG::open_encoder(const char*, const char*):
>>> open failed av1_vaapi:/dev/shm/yuv-test-reenc-rgba8-mpeg-range.webm
>>> Render::render_single: Session finished.
>>> Total excess of backups: -50
>>> [AVIOContext @ 0xeaf1aa40] Statistics: 4570842 bytes read, 5 seeks
>>> [AVIOContext @ 0xeaf348c0] Statistics: 2997978 bytes read, 2 seeks
>>> [AVIOContext @ 0xd7aa8900] Statistics: 4272574 bytes read, 2 seeks
>>> [AVIOContext @ 0xd7954080] Statistics: 2997978 bytes read, 2 seeks
>>> [AVIOContext @ 0xf40c2840] Statistics: 9351290 bytes read, 18 seeks
>>> [AVIOContext @ 0xf4008a00] Statistics: 2997978 bytes read, 2 seeks
>>> Session time: 0:00:48
>>> Cpu time: user: 0:00:09.659 sys: 0:00:03.077
>>>
>>> so i guess it sets surface format now correctly, just no encoder
>>> entrypoint (obviously on my hw)?
>>>
>>> Terje, Andrea - can you test this hack ?
>>>
>>>
>> one more time, this time with env variable
>>
>> CIN_10BIT_ENC=1 bin/cin ~/6029.mp4
>>
>> should enable P010LE input surface format ...but you probably need to set
>> profile etc manually?
>>
>>
>>
>> OK, P010 should be a 10bit 420 format, while Y210 is the 10bit 422 format.
>>
>>
>> I tried your last suggestion and started Cin with
>>
>> CIN_10BIT_ENC=1 bin/cin
>>
>> rendered a 10bit 422 mov input file and got
>>
>> ffprobe -hide_banner hd01_hevc_vaapi.mp4
>> Stream #0:0[0x1](und): Video: hevc (Main) (hev1 / 0x31766568),
>> yuv420p(tv, bt709/unknown/unknown, top coded first (swapped)), 1920x1080
>> [SAR 1:1 DAR 16:9], 11225 kb/s, 25 fps, 25 tbr, 12800 tbn (default)
>>
>> from Mediainfo
>> Color space : YUV
>> Chroma subsampling : 4:2:0
>> Bit depth : 8 bits
>>
>>
>> But how should I apply your attached "10bit.diff" patch?
>>
>> It didn't work with
>>
>> localhost:/Cin # git am 10bit.diff
>> fatal: previous rebase directory .git/rebase-apply still exists but mbox
>> given.
>>
>
>
> try to
>
> rm .git/rebase-apply
>
>
> localhost:/Cin # rm .git/rebase-apply
> rm: cannot remove '.git/rebase-apply': No such file or directory
>
> localhost:/Cin # git am 10bit.diff
> fatal: previous rebase directory .git/rebase-apply still exists but mbox
> given.
>
> Am I in wrong directory?
>
oh sorry yes
rm ../.git/rebase-apply (from one level up)
>
> localhost:/Cin # ls -la /Cin
> lrwxrwxrwx 1 root root 29 Oct 22 20:23 /Cin ->
> /home/cinelerra/cinelerra-5.1
>
> localhost:/Cin # ls 10bit.diff
> 10bit.diff
>
>
>
>>
>>
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20241027/6c1e5f4a/attachment-0001.htm>
More information about the Cin
mailing list