[Cin] 10bit VAAPI encoding test thread
Andrew Randrianasulu
randrianasulu at gmail.com
Sun Oct 27 17:46:46 CET 2024
On Sun, Oct 27, 2024 at 7:28 PM Terje J. Hanssen <terjejhanssen at gmail.com>
wrote:
>
>
>
> Den 27.10.2024 17:22, skrev Andrew Randrianasulu:
>
>
>
> вс, 27 окт. 2024 г., 19:02 Terje J. Hanssen <terjejhanssen at gmail.com>:
>
>>
>>
>>
>> Den 27.10.2024 16:35, skrev Andrew Randrianasulu:
>>
>>
>>
>> вс, 27 окт. 2024 г., 18:30 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>
>>>
>>>
>>>
>>> Den 27.10.2024 16:21, skrev Andrew Randrianasulu:
>>>
>>>
>>>
>>> вс, 27 окт. 2024 г., 13:17 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>>
>>>>
>>>>
>>>>
>>>> Den 26.10.2024 01:37, skrev Andrew Randrianasulu:
>>>>
>>>>
>>>>
>>>> On Sat, Oct 26, 2024 at 2:14 AM Andrew Randrianasulu <
>>>> randrianasulu at gmail.com> wrote:
>>>>
>>>>>
>>>>>
>>>>> On Sat, Oct 26, 2024 at 1:29 AM Andrew Randrianasulu <
>>>>> randrianasulu at gmail.com> wrote:
>>>>>
>>>>>>
>>>>>>
>>>>>> сб, 26 окт. 2024 г., 00:58 Terje J. Hanssen <terjejhanssen at gmail.com
>>>>>> >:
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Den 25.10.2024 21:48, skrev Andrew Randrianasulu:
>>>>>>>
>>>>>>> We branching!
>>>>>>>
>>>>>>> I looked at gpu-screen-recorder
>>>>>>>
>>>>>>>
>>>>>>> https://git.dec05eba.com/gpu-screen-recorder/tree/src/encoder/video/vaapi.c
>>>>>>>
>>>>>>> it sets
>>>>>>>
>>>>>>> AVHWFramesContext *hw_frame_context = (AVHWFramesContext*)frame_context->data;
>>>>>>> hw_frame_context->width = video_codec_context->width;
>>>>>>> hw_frame_context->height = video_codec_context->height;
>>>>>>> hw_frame_context->sw_format = self->params.color_depth == GSR_COLOR_DEPTH_10_BITS ? AV_PIX_FMT_P010LE : AV_PIX_FMT_NV12;
>>>>>>> hw_frame_context->format = video_codec_context->pix_fmt;
>>>>>>> hw_frame_context->device_ctx = (AVHWDeviceContext*)self->device_ctx->data;
>>>>>>>
>>>>>>> so may be we need to set AV_PIX_FMT_P010LE and not just P010?
>>>>>>>
>>>>>>>
>>>>>>> Sorry, It didn't render more than 8bit yuv420p
>>>>>>>
>>>>>>
>>>>>>
>>>>>> yeahh ... probably need more debugging (seeing what pixel format
>>>>>> goes into ffmpeg vaapi interface at least).
>>>>>>
>>>>>> I only have decoding on nouveau, and quite flaky at that - only 2
>>>>>> files so far worked w,/o crashing, from around 2011/12.
>>>>>>
>>>>>>
>>>>>> I tried to change two instances of NV12 to P010LE and it shows no
>>>>>> visible effect, so I assume it was supposed to work with encoding ...?
>>>>>>
>>>>>> it does not work even with qsv set to p010 AND patch ?
>>>>>>
>>>>>> if so, I am afraid I only can put this item on shelf ... for now.
>>>>>> Look at mantis bug database, if there is no entry about 10bit vaapi
>>>>>> deciding/encoding - add it please ....
>>>>>>
>>>>>> you can also test (at some point in time ) this gpu_screen_recorder,
>>>>>> it builds but does not work for me due to "nouveau" driver.
>>>>>>
>>>>>>
>>>>>
>>>>> at least with another patch (attached) I can get this:
>>>>>
>>>>> bash-5.1$ bin/cin ~/6029.mp4
>>>>> Cinelerra Infinity - built: Oct 17 2024 16:18:31
>>>>> git://git.cinelerra-gg.org/goodguy/cinelerra.git
>>>>> (c) 2006-2019 Heroine Virtual Ltd. by Adam Williams
>>>>> 2007-2020 mods for Cinelerra-GG by W.P.Morrow aka goodguy
>>>>> 2003-2017 mods for Cinelerra-CV by CinelerraCV team
>>>>> 2015-2024 mods for Cinelerra-GG by Cinelerra-GG team
>>>>>
>>>>> Libav version: Lavc61.3.100
>>>>>
>>>>> Cinelerra is free software, covered by the GNU General Public License,
>>>>> and you are welcome to change it and/or distribute copies of it under
>>>>> certain conditions. There is absolutely no warranty for Cinelerra.
>>>>>
>>>>> RenderFarmClient::main_loop: client started
>>>>> [AVHWDeviceContext @ 0xf925c00] Trying to use DRM render node for
>>>>> device 0.
>>>>> [AVHWDeviceContext @ 0xf925c00] libva: VA-API version 1.19.0
>>>>> [AVHWDeviceContext @ 0xf925c00] libva: Trying to open
>>>>> /usr/lib/dri/nouveau_drv_video.so
>>>>> [AVHWDeviceContext @ 0xf925c00] libva: Found init function
>>>>> __vaDriverInit_1_19
>>>>> [AVHWDeviceContext @ 0xf925c00] libva: va_openDriver() returns 0
>>>>> [AVHWDeviceContext @ 0xf925c00] Initialised VAAPI connection: version
>>>>> 1.19
>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x3231564e -> nv12.
>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x30313050 -> p010le.
>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x36313050 -> unknown.
>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x30323449 -> yuv420p.
>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x32315659 -> yuv420p.
>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x56595559 -> unknown.
>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x32595559 -> yuyv422.
>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x59565955 -> uyvy422.
>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x41524742 -> bgra.
>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x41424752 -> rgba.
>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x58524742 -> bgr0.
>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x58424752 -> rgb0.
>>>>> [AVHWDeviceContext @ 0xf925c00] VAAPI driver: Mesa Gallium driver
>>>>> 22.1.7 for NV106.
>>>>> [AVHWDeviceContext @ 0xf925c00] Driver not found in known nonstandard
>>>>> list, using standard behaviour.
>>>>> [AVHWFramesContext @ 0xea43980] Created surface 0x1.
>>>>> [AVHWFramesContext @ 0xea43980] Direct mapping possible.
>>>>> [av1_vaapi @ 0xf978680] Input surface format is p010le.
>>>>> [av1_vaapi @ 0xf978680] Compatible profile VAProfileAV1Profile0 (32)
>>>>> is not supported by driver.
>>>>> [av1_vaapi @ 0xf978680] No usable encoding profile found.
>>>>> FFMPEG::open_encoder err: Function not implemented
>>>>> int FFMPEG::open_encoder(const char*, const char*):
>>>>> open failed av1_vaapi:/dev/shm/yuv-test-reenc-rgba8-mpeg-range.webm
>>>>> Render::render_single: Session finished.
>>>>> Total excess of backups: -50
>>>>> [AVIOContext @ 0xeaf1aa40] Statistics: 4570842 bytes read, 5 seeks
>>>>> [AVIOContext @ 0xeaf348c0] Statistics: 2997978 bytes read, 2 seeks
>>>>> [AVIOContext @ 0xd7aa8900] Statistics: 4272574 bytes read, 2 seeks
>>>>> [AVIOContext @ 0xd7954080] Statistics: 2997978 bytes read, 2 seeks
>>>>> [AVIOContext @ 0xf40c2840] Statistics: 9351290 bytes read, 18 seeks
>>>>> [AVIOContext @ 0xf4008a00] Statistics: 2997978 bytes read, 2 seeks
>>>>> Session time: 0:00:48
>>>>> Cpu time: user: 0:00:09.659 sys: 0:00:03.077
>>>>>
>>>>> so i guess it sets surface format now correctly, just no encoder
>>>>> entrypoint (obviously on my hw)?
>>>>>
>>>>> Terje, Andrea - can you test this hack ?
>>>>>
>>>>>
>>>> one more time, this time with env variable
>>>>
>>>> CIN_10BIT_ENC=1 bin/cin ~/6029.mp4
>>>>
>>>> should enable P010LE input surface format ...but you probably need to
>>>> set profile etc manually?
>>>>
>>>>
>>>>
>>>> OK, P010 should be a 10bit 420 format, while Y210 is the 10bit 422
>>>> format.
>>>>
>>>>
>>>> I tried your last suggestion and started Cin with
>>>>
>>>> CIN_10BIT_ENC=1 bin/cin
>>>>
>>>> rendered a 10bit 422 mov input file and got
>>>>
>>>> ffprobe -hide_banner hd01_hevc_vaapi.mp4
>>>> Stream #0:0[0x1](und): Video: hevc (Main) (hev1 / 0x31766568),
>>>> yuv420p(tv, bt709/unknown/unknown, top coded first (swapped)), 1920x1080
>>>> [SAR 1:1 DAR 16:9], 11225 kb/s, 25 fps, 25 tbr, 12800 tbn (default)
>>>>
>>>> from Mediainfo
>>>> Color space : YUV
>>>> Chroma subsampling : 4:2:0
>>>> Bit depth : 8 bits
>>>>
>>>>
>>>> But how should I apply your attached "10bit.diff" patch?
>>>>
>>>> It didn't work with
>>>>
>>>> localhost:/Cin # git am 10bit.diff
>>>> fatal: previous rebase directory .git/rebase-apply still exists but
>>>> mbox given.
>>>>
>>>
>>>
>>> try to
>>>
>>> rm .git/rebase-apply
>>>
>>>
>>> localhost:/Cin # rm .git/rebase-apply
>>> rm: cannot remove '.git/rebase-apply': No such file or directory
>>>
>>> localhost:/Cin # git am 10bit.diff
>>> fatal: previous rebase directory .git/rebase-apply still exists but mbox
>>> given.
>>>
>>> Am I in wrong directory?
>>>
>>
>>
>>
>>
>> oh sorry yes
>>
>>
>>
>> rm ../.git/rebase-apply (from one level up)
>>
>>
>> you mean deleting the whole directory?
>>
>> rm -r ../.git/rebase-apply
>>
>
> yes
>
>
> Sorry, but now I get
>
> localhost:/Cin # rm -r ../.git/rebase-apply
>
> localhost:/Cin # git am 10bit.diff
> Patch format detection failed.
>
> I was wondering if the patch needs .patch at the end like the previous
> patches?
>
sorry, it was git diff, not git add/git commit/git format-patch.
may be apply it with just cat | patch -p1 or something
or try attached
>
>
>
>>
>>> localhost:/Cin # ls -la /Cin
>>> lrwxrwxrwx 1 root root 29 Oct 22 20:23 /Cin ->
>>> /home/cinelerra/cinelerra-5.1
>>>
>>> localhost:/Cin # ls 10bit.diff
>>> 10bit.diff
>>>
>>>
>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20241027/a4e489b7/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-Experimental-try-10bit-vaapi-encoding.patch
Type: text/x-patch
Size: 2416 bytes
Desc: not available
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20241027/a4e489b7/attachment-0001.patch>
More information about the Cin
mailing list