[Cin] 10bit VAAPI encoding test thread
Andrew Randrianasulu
randrianasulu at gmail.com
Sun Oct 27 18:16:27 CET 2024
вс, 27 окт. 2024 г., 19:48 Terje J. Hanssen <terjejhanssen at gmail.com>:
>
>
>
> Den 27.10.2024 17:46, skrev Andrew Randrianasulu:
>
>
>
> On Sun, Oct 27, 2024 at 7:28 PM Terje J. Hanssen <terjejhanssen at gmail.com>
> wrote:
>
>>
>>
>>
>> Den 27.10.2024 17:22, skrev Andrew Randrianasulu:
>>
>>
>>
>> вс, 27 окт. 2024 г., 19:02 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>
>>>
>>>
>>>
>>> Den 27.10.2024 16:35, skrev Andrew Randrianasulu:
>>>
>>>
>>>
>>> вс, 27 окт. 2024 г., 18:30 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>>
>>>>
>>>>
>>>>
>>>> Den 27.10.2024 16:21, skrev Andrew Randrianasulu:
>>>>
>>>>
>>>>
>>>> вс, 27 окт. 2024 г., 13:17 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>>>
>>>>>
>>>>>
>>>>>
>>>>> Den 26.10.2024 01:37, skrev Andrew Randrianasulu:
>>>>>
>>>>>
>>>>>
>>>>> On Sat, Oct 26, 2024 at 2:14 AM Andrew Randrianasulu <
>>>>> randrianasulu at gmail.com> wrote:
>>>>>
>>>>>>
>>>>>>
>>>>>> On Sat, Oct 26, 2024 at 1:29 AM Andrew Randrianasulu <
>>>>>> randrianasulu at gmail.com> wrote:
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> сб, 26 окт. 2024 г., 00:58 Terje J. Hanssen <terjejhanssen at gmail.com
>>>>>>> >:
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Den 25.10.2024 21:48, skrev Andrew Randrianasulu:
>>>>>>>>
>>>>>>>> We branching!
>>>>>>>>
>>>>>>>> I looked at gpu-screen-recorder
>>>>>>>>
>>>>>>>>
>>>>>>>> https://git.dec05eba.com/gpu-screen-recorder/tree/src/encoder/video/vaapi.c
>>>>>>>>
>>>>>>>> it sets
>>>>>>>>
>>>>>>>> AVHWFramesContext *hw_frame_context = (AVHWFramesContext*)frame_context->data;
>>>>>>>> hw_frame_context->width = video_codec_context->width;
>>>>>>>> hw_frame_context->height = video_codec_context->height;
>>>>>>>> hw_frame_context->sw_format = self->params.color_depth == GSR_COLOR_DEPTH_10_BITS ? AV_PIX_FMT_P010LE : AV_PIX_FMT_NV12;
>>>>>>>> hw_frame_context->format = video_codec_context->pix_fmt;
>>>>>>>> hw_frame_context->device_ctx = (AVHWDeviceContext*)self->device_ctx->data;
>>>>>>>>
>>>>>>>> so may be we need to set AV_PIX_FMT_P010LE and not just P010?
>>>>>>>>
>>>>>>>>
>>>>>>>> Sorry, It didn't render more than 8bit yuv420p
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> yeahh ... probably need more debugging (seeing what pixel format
>>>>>>> goes into ffmpeg vaapi interface at least).
>>>>>>>
>>>>>>> I only have decoding on nouveau, and quite flaky at that - only 2
>>>>>>> files so far worked w,/o crashing, from around 2011/12.
>>>>>>>
>>>>>>>
>>>>>>> I tried to change two instances of NV12 to P010LE and it shows no
>>>>>>> visible effect, so I assume it was supposed to work with encoding ...?
>>>>>>>
>>>>>>> it does not work even with qsv set to p010 AND patch ?
>>>>>>>
>>>>>>> if so, I am afraid I only can put this item on shelf ... for now.
>>>>>>> Look at mantis bug database, if there is no entry about 10bit vaapi
>>>>>>> deciding/encoding - add it please ....
>>>>>>>
>>>>>>> you can also test (at some point in time ) this gpu_screen_recorder,
>>>>>>> it builds but does not work for me due to "nouveau" driver.
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> at least with another patch (attached) I can get this:
>>>>>>
>>>>>> bash-5.1$ bin/cin ~/6029.mp4
>>>>>> Cinelerra Infinity - built: Oct 17 2024 16:18:31
>>>>>> git://git.cinelerra-gg.org/goodguy/cinelerra.git
>>>>>> (c) 2006-2019 Heroine Virtual Ltd. by Adam Williams
>>>>>> 2007-2020 mods for Cinelerra-GG by W.P.Morrow aka goodguy
>>>>>> 2003-2017 mods for Cinelerra-CV by CinelerraCV team
>>>>>> 2015-2024 mods for Cinelerra-GG by Cinelerra-GG team
>>>>>>
>>>>>> Libav version: Lavc61.3.100
>>>>>>
>>>>>> Cinelerra is free software, covered by the GNU General Public License,
>>>>>> and you are welcome to change it and/or distribute copies of it under
>>>>>> certain conditions. There is absolutely no warranty for Cinelerra.
>>>>>>
>>>>>> RenderFarmClient::main_loop: client started
>>>>>> [AVHWDeviceContext @ 0xf925c00] Trying to use DRM render node for
>>>>>> device 0.
>>>>>> [AVHWDeviceContext @ 0xf925c00] libva: VA-API version 1.19.0
>>>>>> [AVHWDeviceContext @ 0xf925c00] libva: Trying to open
>>>>>> /usr/lib/dri/nouveau_drv_video.so
>>>>>> [AVHWDeviceContext @ 0xf925c00] libva: Found init function
>>>>>> __vaDriverInit_1_19
>>>>>> [AVHWDeviceContext @ 0xf925c00] libva: va_openDriver() returns 0
>>>>>> [AVHWDeviceContext @ 0xf925c00] Initialised VAAPI connection: version
>>>>>> 1.19
>>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x3231564e -> nv12.
>>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x30313050 -> p010le.
>>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x36313050 -> unknown.
>>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x30323449 -> yuv420p.
>>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x32315659 -> yuv420p.
>>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x56595559 -> unknown.
>>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x32595559 -> yuyv422.
>>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x59565955 -> uyvy422.
>>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x41524742 -> bgra.
>>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x41424752 -> rgba.
>>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x58524742 -> bgr0.
>>>>>> [AVHWDeviceContext @ 0xf925c00] Format 0x58424752 -> rgb0.
>>>>>> [AVHWDeviceContext @ 0xf925c00] VAAPI driver: Mesa Gallium driver
>>>>>> 22.1.7 for NV106.
>>>>>> [AVHWDeviceContext @ 0xf925c00] Driver not found in known nonstandard
>>>>>> list, using standard behaviour.
>>>>>> [AVHWFramesContext @ 0xea43980] Created surface 0x1.
>>>>>> [AVHWFramesContext @ 0xea43980] Direct mapping possible.
>>>>>> [av1_vaapi @ 0xf978680] Input surface format is p010le.
>>>>>> [av1_vaapi @ 0xf978680] Compatible profile VAProfileAV1Profile0 (32)
>>>>>> is not supported by driver.
>>>>>> [av1_vaapi @ 0xf978680] No usable encoding profile found.
>>>>>> FFMPEG::open_encoder err: Function not implemented
>>>>>> int FFMPEG::open_encoder(const char*, const char*):
>>>>>> open failed av1_vaapi:/dev/shm/yuv-test-reenc-rgba8-mpeg-range.webm
>>>>>> Render::render_single: Session finished.
>>>>>> Total excess of backups: -50
>>>>>> [AVIOContext @ 0xeaf1aa40] Statistics: 4570842 bytes read, 5 seeks
>>>>>> [AVIOContext @ 0xeaf348c0] Statistics: 2997978 bytes read, 2 seeks
>>>>>> [AVIOContext @ 0xd7aa8900] Statistics: 4272574 bytes read, 2 seeks
>>>>>> [AVIOContext @ 0xd7954080] Statistics: 2997978 bytes read, 2 seeks
>>>>>> [AVIOContext @ 0xf40c2840] Statistics: 9351290 bytes read, 18 seeks
>>>>>> [AVIOContext @ 0xf4008a00] Statistics: 2997978 bytes read, 2 seeks
>>>>>> Session time: 0:00:48
>>>>>> Cpu time: user: 0:00:09.659 sys: 0:00:03.077
>>>>>>
>>>>>> so i guess it sets surface format now correctly, just no encoder
>>>>>> entrypoint (obviously on my hw)?
>>>>>>
>>>>>> Terje, Andrea - can you test this hack ?
>>>>>>
>>>>>>
>>>>> one more time, this time with env variable
>>>>>
>>>>> CIN_10BIT_ENC=1 bin/cin ~/6029.mp4
>>>>>
>>>>> should enable P010LE input surface format ...but you probably need to
>>>>> set profile etc manually?
>>>>>
>>>>>
>>>>>
>>>>> OK, P010 should be a 10bit 420 format, while Y210 is the 10bit 422
>>>>> format.
>>>>>
>>>>>
>>>>> I tried your last suggestion and started Cin with
>>>>>
>>>>> CIN_10BIT_ENC=1 bin/cin
>>>>>
>>>>> rendered a 10bit 422 mov input file and got
>>>>>
>>>>> ffprobe -hide_banner hd01_hevc_vaapi.mp4
>>>>> Stream #0:0[0x1](und): Video: hevc (Main) (hev1 / 0x31766568),
>>>>> yuv420p(tv, bt709/unknown/unknown, top coded first (swapped)), 1920x1080
>>>>> [SAR 1:1 DAR 16:9], 11225 kb/s, 25 fps, 25 tbr, 12800 tbn (default)
>>>>>
>>>>> from Mediainfo
>>>>> Color space : YUV
>>>>> Chroma subsampling : 4:2:0
>>>>> Bit depth : 8 bits
>>>>>
>>>>>
>>>>> But how should I apply your attached "10bit.diff" patch?
>>>>>
>>>>> It didn't work with
>>>>>
>>>>> localhost:/Cin # git am 10bit.diff
>>>>> fatal: previous rebase directory .git/rebase-apply still exists but
>>>>> mbox given.
>>>>>
>>>>
>>>>
>>>> try to
>>>>
>>>> rm .git/rebase-apply
>>>>
>>>>
>>>> localhost:/Cin # rm .git/rebase-apply
>>>> rm: cannot remove '.git/rebase-apply': No such file or directory
>>>>
>>>> localhost:/Cin # git am 10bit.diff
>>>> fatal: previous rebase directory .git/rebase-apply still exists but
>>>> mbox given.
>>>>
>>>> Am I in wrong directory?
>>>>
>>>
>>>
>>>
>>>
>>> oh sorry yes
>>>
>>>
>>>
>>> rm ../.git/rebase-apply (from one level up)
>>>
>>>
>>> you mean deleting the whole directory?
>>>
>>> rm -r ../.git/rebase-apply
>>>
>>
>> yes
>>
>>
>> Sorry, but now I get
>>
>> localhost:/Cin # rm -r ../.git/rebase-apply
>>
>> localhost:/Cin # git am 10bit.diff
>> Patch format detection failed.
>>
>> I was wondering if the patch needs .patch at the end like the previous
>> patches?
>>
>
> sorry, it was git diff, not git add/git commit/git format-patch.
>
> may be apply it with just cat | patch -p1 or something
>
> or try attached
>
>
> Hm?
>
> localhost:/Cin # git am 0001-Experimental-try-10bit-vaapi-encoding.patch
> Applying: Experimental: try 10bit vaapi encoding
> error: cinelerra-5.1/cinelerra/ffmpeg.C: does not match index
> Patch failed at 0001 Experimental: try 10bit vaapi encoding
> hint: Use 'git am --show-current-patch=diff' to see the failed patch
> hint: When you have resolved this problem, run "git am --continue".
> hint: If you prefer to skip this patch, run "git am --skip" instead.
> hint: To restore the original branch and stop patching, run "git am
> --abort".
> hint: Disable this message with "git config advice.mergeConflict false"
>
you probably have previous patch applied
try git reset --hard before git am.
>
>
>
>
>>
>>
>>
>>>
>>>> localhost:/Cin # ls -la /Cin
>>>> lrwxrwxrwx 1 root root 29 Oct 22 20:23 /Cin ->
>>>> /home/cinelerra/cinelerra-5.1
>>>>
>>>> localhost:/Cin # ls 10bit.diff
>>>> 10bit.diff
>>>>
>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20241027/6cbad238/attachment-0001.htm>
More information about the Cin
mailing list