<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<br>
<br>
<div class="moz-cite-prefix">Den 16.01.2024 16:34, skrev Andrew
Randrianasulu:<br>
</div>
<blockquote type="cite"
cite="mid:CA+rFky64QP6yNm0UcpHZyTtfAfuPPHvPznc0eOAUyihGQhty=w@mail.gmail.com">
<pre class="moz-quote-pre" wrap="">Start cinelerra-gg from terminal so you can see terminal output
Open your source in cinelerra-gg as usual, choice format settings, go
to DVD creation window.</pre>
</blockquote>
<br>
What source, a DV file, and should this be a Raw "PCM Audio CD"
without video?<br>
I ask because as default on the next Batchrender window only the
Video track is checked, while the Audio track is unchecked and
locked.<br>
<br>
<br>
<blockquote type="cite"
cite="mid:CA+rFky64QP6yNm0UcpHZyTtfAfuPPHvPznc0eOAUyihGQhty=w@mail.gmail.com">
<pre class="moz-quote-pre" wrap="">
Select all values as you need, click ok, wait for batchrender window to appear
In it, select second line and change codec to RAW PCM, and set it to
16 bit, signed, byteorder Lo-Hi (big endian)</pre>
</blockquote>
<br>
Now the Audio track is being checked, while the Video track is being
uncheked and locked.<br>
<br>
What I don't see, is the possibility to make a DVD Video with PCM
audio from the source DV file?<br>
<br>
like this:<br>
<blockquote><font face="Courier New, Courier, monospace">Input #0,
mpeg, from
'/run/media/terje/Seagate_8TB_back/video/DVD/paldvdhqFS+pcm_PS_DVD_dv01/movies/movie_0.mpg':</font><br>
<font face="Courier New, Courier, monospace"> Duration:
00:09:56.48, start: 0.540000, bitrate: 9655 kb/s</font><br>
<font face="Courier New, Courier, monospace"> Stream #0:0[0x1bf]:
Data: dvd_nav_packet</font><br>
<font face="Courier New, Courier, monospace"> Stream #0:1[0x1e0]:
Video: mpeg2video (Main), yuv420p(tv, progressive), 720x576 [SAR
16:15 DAR 4:3], 25 fps, 25 tbr, 90k tbn, 50 tbc</font><br>
<font face="Courier New, Courier, monospace"> Side data:</font><br>
<font face="Courier New, Courier, monospace"> cpb: bitrate
max/min/avg: 9000000/0/0 buffer size: 1835008 vbv_delay: N/A</font><br>
<font face="Courier New, Courier, monospace"> Stream #0:2[0xa0]:
Audio: pcm_dvd, 48000 Hz, 2 channels, s16, 1536 kb/s</font><br>
<br>
</blockquote>
<br>
<br>
<blockquote type="cite"
cite="mid:CA+rFky64QP6yNm0UcpHZyTtfAfuPPHvPznc0eOAUyihGQhty=w@mail.gmail.com">
<pre class="moz-quote-pre" wrap="">
click "start". Cingg will finish but job is not!
from terminal, note location of dvd.sh file and open it in editor
running /dev/shm//dvd_20240116-182336/dvd.sh
INFO: [mplex] mplex version 2.1.0 (2.2.7 $Date: 2012/11/17 01:55:16 $)
**ERROR: [mplex] Unable to open file
/dev/shm/dvd_20240116-182336/dvd.ac3 for reading.
so
mcedit /dev/shm//dvd_20240116-182336/dvd.sh
and set mplex parameter " -L 48000:2:16" so full string will look like
mplex -f 8 -L 48000:2:16 -o $dir/dvd.mpg $dir/dvd.m2v $dir/dvd.lpcm
note, lpcm extension is important!
now mv pcm file into same but with new extension (in theory you can
change audio file extension into lpcm at batchrender window, not
tested)
mv /dev/shm//dvd_20240116-182336/dvd.pcm /dev/shm//dvd_20240116-182336/dvd.lpcm
run script:
bash-5.1$ /dev/shm//dvd_20240116-182336/dvd.sh
running /dev/shm//dvd_20240116-182336/dvd.sh
INFO: [mplex] mplex version 2.1.0 (2.2.7 $Date: 2012/11/17 01:55:16 $)
INFO: [mplex] File /dev/shm/dvd_20240116-182336/dvd.m2v looks like
an MPEG Video stream.
INFO: [mplex] File /dev/shm/dvd_20240116-182336/dvd.lpcm looks like
an LPCM Audio stream.
INFO: [mplex] Video stream 0: profile 8 selected - ignoring
non-standard options!
INFO: [mplex] Found 1 audio streams, 1 video streams and 0 subtitle streams
INFO: [mplex] Selecting dvdauthor DVD output profile
INFO: [mplex] Multiplexing video program stream!
INFO: [mplex] Scanning for header info: Video stream e0
(/dev/shm/dvd_20240116-182336/dvd.m2v)
INFO: [mplex] VIDEO STREAM: e0
INFO: [mplex] Frame width : 720
INFO: [mplex] Frame height : 576
INFO: [mplex] Aspect ratio : 16:9 display
INFO: [mplex] Picture rate : 25.000 frames/sec
INFO: [mplex] Bit rate : 9000000 bits/sec
INFO: [mplex] Vbv buffer size : 229376 bytes
INFO: [mplex] CSPF : 0
INFO: [mplex] Scanning for header info: LPCM Audio stream 00
(/dev/shm/dvd_20240116-182336/dvd.lpcm)
INFO: [mplex] LPCM AUDIO STREAM:
INFO: [mplex] Bit rate : 192000 bytes/sec (1536000) bit/sec)
INFO: [mplex] Channels : 2
INFO: [mplex] Bits per sample: 16
INFO: [mplex] Frequency : 48000 Hz
INFO: [mplex] SYSTEMS/PROGRAM stream:
INFO: [mplex] rough-guess multiplexed stream data rate : 10753200
INFO: [mplex] target data-rate specified : 10080000
++ WARN: [mplex] Target data rate lower than computed requirement!
++ WARN: [mplex] N.b. a 20% or so discrepancy in variable bit-rate
++ WARN: [mplex] streams is common and harmless provided no time-outs will occur
INFO: [mplex] Run-in delay = 10800 Video delay = 10800 Audio delay = 14400
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 0 frame=000000 sector=00000000
INFO: [mplex] Audio bd: buf= 0 frame=000000 sector=00000000
INFO: [mplex] STREAM e0 completed
INFO: [mplex] STREAM bd completed
INFO: [mplex] Multiplex completion at SCR=265362.
INFO: [mplex] Video e0: completed
INFO: [mplex] Audio bd: completed
INFO: [mplex] VIDEO_STATISTICS: e0
INFO: [mplex] Video Stream length: 3101158 bytes
INFO: [mplex] Sequence headers: 5
INFO: [mplex] Sequence ends : 0
INFO: [mplex] No. Pictures : 75
INFO: [mplex] No. Groups : 5
INFO: [mplex] No. I Frames : 5 avg. size 51909 bytes
INFO: [mplex] No. P Frames : 71 avg. size 39569 bytes
INFO: [mplex] No. B Frames : 0 avg. size 0 bytes
INFO: [mplex] Average bit-rate : 8160800 bits/sec
INFO: [mplex] Peak bit-rate : 8992000 bits/sec
INFO: [mplex] BUFFERING min 22252 Buf max 219233
INFO: [mplex] AUDIO_STATISTICS: bd
INFO: [mplex] Audio stream length 583680 bytes.
INFO: [mplex] Frames : 1823
INFO: [mplex] BUFFERING min 12112 Buf max 52344
INFO: [mplex] MUX STATUS: no under-runs detected.
DVDAuthor::dvdauthor, version 0.7.2.
Build options: gnugetopt imagemagick iconv freetype fribidi fontconfig
Send bug reports to <a class="moz-txt-link-rfc2396E" href="mailto:dvdauthor-users@lists.sourceforge.net"><dvdauthor-users@lists.sourceforge.net></a>
INFO: default video format is PAL
INFO: dvdauthor creating VTS
STAT: Picking VTS 01
STAT: Processing /dev/shm/dvd_20240116-182336/dvd.mpg...
INFO: Video pts = 0.160 .. 3.160
INFO: Audio[16] pts = 0.160 .. 3.200
STAT: VOBU 5 at 3MB, 1 PGCs
CHAPTERS: VTS[1/1] 0.000
INFO: Generating VTS with the following video attributes:
INFO: MPEG version: mpeg2
INFO: TV standard: pal
INFO: Aspect ratio: 16:9
INFO: Resolution: 720x576
INFO: Audio ch 0 format: ac3/6ch, 48khz drc, 'en'
WARN: Audio ch 0 is not used!
INFO: Audio ch 1 format: pcm/2ch, 48khz 16bps
STAT: fixed 5 VOBUs
INFO: dvdauthor creating table of contents
INFO: Scanning /dev/shm/dvd_20240116-182336/iso/VIDEO_TS/VTS_01_0.IFO
To burn dvd, load blank media and run:
growisofs -dvd-compat -Z /dev/dvd -dvd-video /dev/shm/dvd_20240116-182336/iso
Завершено
====
you probably need to tweak dvdauthor file to so our audio will be
audio channel 0.
I'm thinking about making "use PCM" checkbox in (already a bit
crowded) DVD creation window ..lets see now it will progress ...
example files attached ...
</pre>
</blockquote>
<br>
</body>
</html>