[Cin] some problems - batch rendering warnings and opening project error, steps to have cinelerraGG officially in Gentoo

[deim31]

Dne 04. 09. 19 v 23:49 Phyllis Smith napsal(a):
> 
> 
> Deim:   today, gg finally had a chance to look at:   deim_broken_edl.tar.xz
> 
> However, we are both having trouble with terminology and neither of us 
> can see the problem.  Sometimes he can see from the EDL an obvious error 
> but unfortunately with more than 8,000 lines in the EDL, nothing jumps 
> out as a problem.
> 
> /*What is a "part"* as you use in describing your method below? /I am 
> not sure we are going to be able to reproduce this error and if we can 
> not, then will not be able to fix anything.  Phyllis/GG
> 
>     I had problems also with this method of work:
>     - load assets for part of video
>     - cut everything for this part on timeline
>     - save project
>     - repeat for each part
> 
>     Then I loaded all saved parts to project as resources - it loaded saved
>     parts as clips and all assets to resources. Then I pasted clips on
>     timeline of final video and made final cut. Then I saved final project.
>     Closed Cinelerra then I was unable to reopen saved project - it only
>     showed one of clips on timeline :-(
> 
> 

I wonder if it's safe method at all - to load projects as resources 
(i.e. they loads as clips). I discovered another problem - I applied 
filter with keys to one (sub)project. Then I loaded them to main project 
and it seemed the filter is spread over the project but there is no 
visible controls (the bar with keys is not visible). I'm not much 
familiar with nesting in CinGG so I can't say if it's this case.

Maybe I discovered source of problem - in (sub)project which made error 
I found the note "Hello world" several times, which displayed in main 
project - I don't understand this xml tags, but I suppose this is the 
relevant part:

<VWINDOW_EDL>
<LOCALSESSION IN_POINT=-1 LOOP_PLAYBACK=0 LOOP_START=0 LOOP_END=0 
OUT_POINT=-1 SELECTION_START=1.0427083333333334e+01 
SELECTION_END=1.0427083333333334e+01 CLIP_TITLE=wethercast.mxf 
CLIP_ICON="" X_PANE=-1 Y_PANE=-1 TRACK_START0=0 VIEW_START0=0 
TRACK_START1=0 VIEW_START1=0 TRACK_START2=0 VIEW_START2=0 TRACK_START3=0 
VIEW_START3=0 ZOOM_SAMPLE=1024 ZOOMY=0 ZOOM_TRACK=0 PREVIEW_START=0 
PREVIEW_END=-1 FLOATAUTO_TYPE=0 RED=0 GREEN=0 BLUE=0 RED_MAX=0 
GREEN_MAX=0 BLUE_MAX=0 USE_MAX=0 AUTOGROUPTYPE_AUDIO_FADE_MIN=-80 
AUTOGROUPTYPE_AUDIO_FADE_MAX=6 AUTOGROUPTYPE_VIDEO_FADE_MIN=0 
AUTOGROUPTYPE_VIDEO_FADE_MAX=100 AUTOGROUPTYPE_ZOOM_MIN=5.000000e-03 
AUTOGROUPTYPE_ZOOM_MAX=5 AUTOGROUPTYPE_SPEED_MIN=5.000000e-03 
AUTOGROUPTYPE_SPEED_MAX=5 AUTOGROUPTYPE_X_MIN=-100 
AUTOGROUPTYPE_X_MAX=100 AUTOGROUPTYPE_Y_MIN=-100 AUTOGROUPTYPE_Y_MAX=100>
<CLIP_NOTES>Hello world</CLIP_NOTES>
</LOCALSESSION>
...

(in this project is no clip visible from cinelerra)

Thanks,
deim