[Cin] Debian 11 build good but problems on execution

[Andrew Randrianasulu]

On Thursday, December 2, 2021, Phyllis Smith via Cin <
cin at lists.cinelerra-gg.org> wrote:

> This is what I did:
> - installed Debian Bullseye from 18 CDs
>

wow, you have some serious patience!

- installed the minimum amount of stuff I thought I needed but still not
> enough...
> - ran blds/bld_prepare.sh debian to install the rest of necessary packages
> - executed ./bld.sh and there were no errors
> - built with the debugger
> - Cinelerra comes up successfully
> - a video .mov file with no audio loads successfully
>

can you post ffprobe/mediainfo of this mov?
I suspect it will have different yuv subsampling from usual yuv420...


- a .jpg fails and backtrace below
> - a big buck bunny .mkv file fails and backtrace below
> Just Loading a x.jpg file:
> --------------------------
> Thread 48 "ci" received signal SIG32, Real-time event 32.
> [Switching to Thread 0x94afdb40 (LWP 23149)]
> 0xb7fd2559 in __kernel_vsyscall ()
> (gdb) bt
> #0  0xb7fd2559 in __kernel_vsyscall ()
> #1  0xb75c03ed in __GI___clock_nanosleep_time64 (clock_id=<optimized out>,
> flags=0, req=0x94afd1cc,
>     rem=0x94afd1dc) at ../sysdeps/unix/sysv/linux/clock_nanosleep.c:52
> #2  0xb75c04be in __GI___clock_nanosleep (clock_id=0, flags=0,
> req=0x94afd238, rem=0x0)
>     at ../sysdeps/unix/sysv/linux/clock_nanosleep.c:92
> #3  0xb75c6a20 in __GI___nanosleep (requested_time=0x94afd238,
> remaining=0x0) at nanosleep.c:27
> #4  0x00d83dbc in Timer::delay (milliseconds=1500) at bctimer.C:100
> #5  0x00d97d45 in BC_Repeater::run (this=0x5e2f3e0) at bcrepeater.C:172
> #6  0x00d832da in Thread::entrypoint (parameters=0x5e2f3e0) at thread.C:68
> #7  0xb7c920b4 in start_thread (arg=<optimized out>) at
> pthread_create.c:477
> #8  0xb7600296 in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:108
>
> this one is new for me!

>
>
> Just loading bigbuckbunny...mxf
> -------------------------------
> Thread 19 "ci" received signal SIGSEGV, Segmentation fault.
> [Switching to Thread 0xa44fab40 (LWP 23194)]
> BC_Xfer::xfer_rgb888_to_rgb888 (this=0xa44f9ffc, y0=<optimized out>,
> y1=64) at xfer_bc_rgb888.C:38
> 38       int r = *inp++, g = *inp++, b = *inp++;
> (gdb) bt
> #0  BC_Xfer::xfer_rgb888_to_rgb888 (this=0xa44f9ffc, y0=<optimized out>,
> y1=64) at xfer_bc_rgb888.C:38
> #1  0x00d95c45 in BC_Xfer::xfer_slices (this=0xa44f9ffc, slices=1) at
> ../bcxfer.C:304
> #2  0x00d9609a in BC_Xfer::xfer (this=0xa44f9ffc) at xfer.C:840
> #3  BC_CModels::transfer (output_ptrs=0x96311760, out_colormodel=9,
> out_x=0, out_y=0, out_w=64, out_h=64,
>     out_rowspan=192, input_ptrs=0x96300d30, in_colormodel=9, in_x=0,
> in_y=0, in_w=808, in_h=808,
>     in_rowspan=2424, bg_color=0) at ../bcxfer.C:205
> #4  0x00d8a099 in VFrame::transfer_from (this=0x96311690, that=0x963007a0,
> bg_color=0, in_x=0, in_y=0,
>     in_w=808, in_h=808) at vframe.C:1236
> #5  0x009c115f in VFrame::transfer_from (this=0x96311690,
> frame=0x963007a0, bg_color=0)
>     at /mnt0/cintoday/cinelerra-5.1/cinelerra/../guicast/vframe.h:147
> #6  0x00c1b3aa in ResourceVideoThread::do_video (this=0x583a130,
> item=0x5a986a0) at resourcethread.C:428
> #7  0x00c1b01e in ResourceVideoThread::draw_item (this=0x583a130,
> item=0x5a986a0) at resourcethread.C:351
> #8  0x00c1ad78 in ResourceThreadBase::run (this=0x583a130) at
> resourcethread.C:303
>





> #9  0x00d832da in Thread::entrypoint (parameters=0x583a130) at thread.C:68
> #10 0xb7c920b4 in start_thread (arg=<optimized out>) at
> pthread_create.c:477
> #11 0xb7600296 in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:108
> is=0x583a130) at resourcethread.C:303
>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20211202/46659a86/attachment.htm>