[Cin] megapatch series 8

[Andrew Randrianasulu]

On Sunday, April 17, 2022, Phyllis Smith <phylsmith2017 at gmail.com> wrote:

> Andrew,
>
> The 2 modifications I made are in bdcreate.C to temporarily comment out
>>> the choices of lpcm and truehd as neither 1 works for me (see error
>>> messages in previous email).
>>>
>>
>> those mesages come from players themselves?
>>
>
> No, from bdwrite -- see the last line in the terminal output below for the
> error message when I choose "truehd" and then "lpcm".  I verified that
> 0004-Improve-truehd-decoder-encoder-from-ffmpeg.git.patch is in as well
> as all of the patches as stated earlier.
>


be sure there is no old bdwrite binary in PATH?


 PATH=/root/.local/bin:/root/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/tmp/cinelerra-5.1/bin





> FFMPEG::open_decoder: some stream times estimated: /root/media/hockey.ts
> Render::render_single: Session finished.
> ** rendered 679 frames in 15.393 secs, 44.111 fps
> ++ dirname /tmp/bd_20220417-102756/bd.sh
> + sdir=/tmp/bd_20220417-102756
> ++ cd /tmp/bd_20220417-102756
> ++ pwd
> + dir=/tmp/bd_20220417-102756
> + PATH=/root/.local/bin:/root/bin:/usr/local/sbin:/usr/
> local/bin:/usr/sbin:/usr/bin:/tmp/cinelerra-5.1/bin
> + mkdir -p /tmp/bd_20220417-102756/udfs
> ++ tail -1
> ++ du -cb /tmp/bd_20220417-102756/bd.m2ts
> ++ sed -e 's/[  ].*//'
> + sz=40396800
> + blks=23821
> + rm -f /tmp/bd_20220417-102756/bd.udfs
> + '[' -f bd.meta ']'
> + mkudffs -b 2048 /tmp/bd_20220417-102756/bd.udfs 23821
> filename=/tmp/bd_20220417-102756/bd.udfs
> label=LinuxUDF
> uuid=625c4025cebbb06e
> blocksize=2048
> blocks=23821
> udfrev=2.01
> start=0, blocks=16, type=ERASE
> start=16, blocks=4, type=VRS
> ...
> start=23648, blocks=16, type=RVDS
> start=23664, blocks=156, type=ERASE
> start=23820, blocks=1, type=ANCHOR
> + mount -t udf -o loop /tmp/bd_20220417-102756/bd.udfs
> /tmp/bd_20220417-102756/udfs
> + bdwrite /tmp/bd_20220417-102756/udfs /tmp/bd_20220417-102756/bd.m2ts
> *unknown bluray audio format 0 ch*
>
> FFMPEG::open_decoder: some stream times estimated: /root/media/hockey.ts
> Render::render_single: Session finished.
> ** rendered 679 frames in 15.329 secs, 44.295 fps
> ++ dirname /tmp/bd_20220417-105416/bd.sh
> + sdir=/tmp/bd_20220417-105416
> ++ cd /tmp/bd_20220417-105416
> ++ pwd
> + dir=/tmp/bd_20220417-105416
> + PATH=/root/.local/bin:/root/bin:/usr/local/sbin:/usr/
> local/bin:/usr/sbin:/usr/bin:/tmp/cinelerra-5.1/bin
> + mkdir -p /tmp/bd_20220417-105416/udfs
> ++ du -cb /tmp/bd_20220417-105416/bd.m2ts
> ++ tail -1
> ++ sed -e 's/[  ].*//'
> + sz=44015616
> + blks=25588
> + rm -f /tmp/bd_20220417-105416/bd.udfs
> + '[' -f bd.meta ']'
> + mkudffs -b 2048 /tmp/bd_20220417-105416/bd.udfs 25588
> filename=/tmp/bd_20220417-105416/bd.udfs
> label=LinuxUDF
> uuid=625c464fcd7855e8
> blocksize=2048
> blocks=25588
> udfrev=2.01
> start=0, blocks=16, type=ERASE
> start=16, blocks=4, type=VRS
> start=20, blocks=76, type=ERASE
> start=96, blocks=16, type=MVDS
> ...
> start=25587, blocks=1, type=ANCHOR
> + mount -t udf -o loop /tmp/bd_20220417-105416/bd.udfs
> /tmp/bd_20220417-105416/udfs
> + bdwrite /tmp/bd_20220417-105416/udfs /tmp/bd_20220417-105416/bd.m2ts
> *unknown bluray stream type pcm_bluray*
>
> may be I misread code, but I thought they were set  at fixed 5 min
>> intervals.. I thought making them at say 10 mins or even 15 mins from cmd
>> line will be good idea.. apparently not (
>>
> No, it is a good idea, that is why I keep testing it because for a 2 hour
> movie which I might put on bluray, every 5 minutes is overkill for a
> chapter.  But I will take your advice and move on for now.  The biggest
> problem with the chapter patch is that on the bluray attached to the TV,
> when you move to the back to the previous chapter,  it acts like it moves
> back but plays where you already were instead.
>
> However, the choice of "tsmuxer" works, or at least does something and
>>> creates no problem but I do not see or hear any difference if checked off
>>> or on.
>>>
>> you need to have tsmuxer binary in $PATH   to see it used
>>
> I wonder why the output is different when I check the tsmuxer box than
> when I don't?
>
>
>

Because I do not check for tsmuxer existence in C code, and just  write
universal sh script doing check for us?



>
>   I do not have tsmuxer binary in the $PATH and when I do "whereis
> tsmuxer", I get nothing so I do not think it is installed. Also, when I
> play each of the blurary with and without tsmuxer checked, I don't really
> notice a difference but I have bad eyes (and ears).
>

this is good to know..

now try to install tsmuxer? :)? You can manually (or in qt5 gui) mark
chapters there and see how players behave....

>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20220417/f8a03496/attachment.htm>