[Cin] bluray lpcm update!
Andrew Randrianasulu
randrianasulu at gmail.com
Wed Apr 27 20:16:44 CEST 2022
On Wednesday, April 27, 2022, Phyllis Smith <phylsmith2017 at gmail.com> wrote:
> The file is Big Buck Bunny bbb-1920x1080-cfg06.mkv and probably came from:
> https://test-videos.co.uk/bigbuckbunny/mkv
>
> Meanwhile I will try a different file -- I use bbb because it is bigger
> than most of my test cases and then is still only 10 minutes long.
>
I think most tsmuxer users use it from win/mac.... so, our linux-only
program driving Linux tsmuxer with hand-hacked ffmpeg might hit some
less-known codepath.. so if you can upload resultant m2ts file somewhere
I'll link it into issue, because this is what usually asked tehre -
problematic ts file to look at.. ..
If you can prepare appimage with all those patches applied may be someone
will test it on Linux too, but I do not hold my breath for this...
> On Wed, Apr 27, 2022 at 11:19 AM Andrew Randrianasulu <
> randrianasulu at gmail.com> wrote:
>
>>
>>
>> On Wednesday, April 27, 2022, Phyllis Smith <phylsmith2017 at gmail.com>
>> wrote:
>>
>>> Much better - now tsmuxer and profile value seem to be reset
>>> appropriately.
>>> But now tsmuxer error:
>>>
>>> tsMuxeR version 2.6.16-dev. github.com/justdan96/tsMuxer
>>> Decoding H264 stream (track 1): Profile: High at 4.1 Resolution:
>>> 1920:1080i Frame rate: 29.97
>>> H.264 muxing fps is not set. Get fps from stream. Value: 29.97
>>> 0.0% complete
>>> Decoding LPCM stream (track 2): Bitrate: 4608Kbps Sample Rate: 48KHz
>>> Channels: 5.1 Bits per sample: 16bit
>>> 18.2% complete
>>> Finalize ISO disk
>>> Reading buffer overflow. Possible container streams are not syncronized.
>>> Please, verify stream fps. File name: /tmp/bd_20220427-090605/bd.m2ts
>>>
>>
>>
>> can you provide example stream for tsmuxer's developers?
>> https://github.com/justdan96/tsMuxer/issues
>>
>> I can enter issue for you, just need link to file in question...
>>
>>
>>> On Tue, Apr 26, 2022 at 7:13 PM Andrew Randrianasulu <
>>> randrianasulu at gmail.com> wrote:
>>>
>>>>
>>>>
>>>> On Wednesday, April 27, 2022, Phyllis Smith <phylsmith2017 at gmail.com>
>>>> wrote:
>>>>
>>>>> Adding use_tsmuxer = 0 after use_farmed = 0 did not work (I did full
>>>>> rebuild just to make sure). There must be a different spot
>>>>> It is possible that the 5:1 audio limitation is Fedora?
>>>>>
>>>>
>>>> no, just diff between av_ch_layout_5point1 and
>>>> av_ch_layout_5point1_back ....
>>>>
>>>>
>>>> try attached patches? one is for thirdparty/src another for cin
>>>> herself..
>>>>
>>>>
>>>>
>>>>> On Tue, Apr 26, 2022 at 6:26 PM Andrew Randrianasulu <
>>>>> randrianasulu at gmail.com> wrote:
>>>>>
>>>>>>
>>>>>>
>>>>>> On Wednesday, April 27, 2022, Phyllis Smith <phylsmith2017 at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Andrew, 10 million "mega" tests later, I finally figured it out.
>>>>>>> Neither the chosen "Profile" or "tsmuxer" setting is getting reset to
>>>>>>> "Bluray" for profile and "no tsmuxer" for tsmuxer.
>>>>>>>
>>>>>>> So what was happening is I loaded a file with 5:1 audio, chose LPCM
>>>>>>> and TSMUXER and the error message of:
>>>>>>> * [pcm_bluray @ 0x7f002b5ff9c0] Specified channel layout '5.1'
>>>>>>> is not supported*
>>>>>>> which is fine as long as I document that. But then I would load Big
>>>>>>> Buck Bunny (also 5:1 audio) and since I saw that tsmuxer was not checked
>>>>>>> and lpcm was not highlighted, I thought is should work and it did not
>>>>>>> because both LPCM and TSMUXER will still "on".
>>>>>>>
>>>>>>> Since I am not sure if I can get it right, could you provide the
>>>>>>> lines of code to change so that the profile and tsmuxer are reset to
>>>>>>> default "not on" values every time BD Render is chosen from the File
>>>>>>> pulldown? Then I can do a final test and check into GIT. Thanks, Phyllis
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> try to add 'use_tsmuxer = 0;
>>>>>>
>>>>>> at this block?
>>>>>>
>>>>>> int CreateBD_Thread::
>>>>>> option_presets()
>>>>>> {
>>>>>> // reset only probed options
>>>>>> use_deinterlace = 0;
>>>>>> use_scale = Rescale::none;
>>>>>> use_resize_tracks = 0;
>>>>>> use_wide_audio = 0;
>>>>>> use_labeled = 0;
>>>>>> use_farmed = 0;
>>>>>>
>>>>>> in cinelerra/bdcreate.C?
>>>>>>
>>>>>>
>>>>>>
>>>>>>> On Tue, Apr 26, 2022 at 7:22 AM Andrew Randrianasulu <
>>>>>>> randrianasulu at gmail.com> wrote:
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tuesday, April 26, 2022, Phyllis Smith <phylsmith2017 at gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Andrew, if instead of choosing lpcm as the profile with the 2
>>>>>>>>> patches in, I choose the standard bluray, it works.
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> note, even if file named like c file it actually diff..
>>>>>>>>>>
>>>>>>>>>> but both patches as send works for me as after full rebuild..
>>>>>>>>>> /
>>>>>>>>>>
>>>>>>>>>> if you (re)move those last two patches from tirdparty/src error
>>>>>>>>>> (can't find codec..) disappears?
>>>>>>>>>>
>>>>>>>>> Yes.
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> do you have some other libavcodec headers installed?
>>>>>>>>
>>>>>>>> what ldd bin/cin (assuming you run from src root for single user)
>>>>>>>> says?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>> but strange. you rebuild cin executable too? (because we link
>>>>>>>>>>>> statically I typed "touch cinelerra/new.C" and this forced rebuild of
>>>>>>>>>>>> this file and re-linking of executable...)
>>>>>>>>>>>>
>>>>>>>>>>> I do full rebuilds by running "make clean" which deletes all of
>>>>>>>>>>> the thirdparty libraries and then do a full rebuild with "./bld.sh". Goes
>>>>>>>>>>> pretty fast on this laptop and it is not worth the aggravation to only
>>>>>>>>>>> rebuild changed itemsl
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> does ffmpeg from thirdparty lists pcm_bluray as supported
>>>>>>>>>>>> encoder?
>>>>>>>>>>>>
>>>>>>>>>>> It must because what is checked into GIT, lets me choose the
>>>>>>>>>>> lpcm profile and on the bluray player, the info button clearly displays it
>>>>>>>>>>> as lpcm.
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> try thirdparty/ffmpeg-4.4/ffmpeg -codecs | grep bluray
>>>>>>>>>>
>>>>>>>>>> [root at keystone cinelerra-5.1]# thirdparty/ffmpeg-4.4/ffmpeg
>>>>>>>>> -codecs | grep bluray
>>>>>>>>> DEAI.S pcm_bluray PCM signed 16|20|24-bit big-endian
>>>>>>>>> for Blu-ray media
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>> On Mon, Apr 25, 2022 at 2:00 PM Andrew Randrianasulu <
>>>>>>>>>>>>> randrianasulu at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Monday, April 25, 2022, Phyllis Smith <
>>>>>>>>>>>>>> phylsmith2017 at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Andrew, applied ffmpeg-4.4.patch_12 and ffmpeg-4.4.patch99
>>>>>>>>>>>>>>> and it compiles but fails with error message "open failed
>>>>>>>>>>>>>>> pcm_bluray:/tmp/bd_date_tme/bd.m2ts" as seen in the
>>>>>>>>>>>>>>> attached png file.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> strange.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> can you double-check patches applied correctly (by comparing
>>>>>>>>>>>>>> pcm-bluenc.c I attached earlier and actual file in
>>>>>>>>>>>>>> thirdparty/ffmpeg/libavcodec? )
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Sun, Apr 24, 2022 at 9:18 AM Andrew Randrianasulu <
>>>>>>>>>>>>>>> randrianasulu at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Paul fixed bug preventing tsmuxer from recognizing our lpcm
>>>>>>>>>>>>>>>> audio stream
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I backshoed fix into our ffmpeg 4.4..
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I think having it all worked in monthly release quite
>>>>>>>>>>>>>>>> important, even if names of patches kinda high...
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> also attached raw pcm-bluenc file as I hacked it, and
>>>>>>>>>>>>>>>> fix/patch as downloaded from gitweb..
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> https://github.com/justdan96/tsMuxer/issues/580
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> https://git.ffmpeg.org/gitweb/ffmpeg.git/blobdiff/
>>>>>>>>>>>>>>>> 037fa0437d2aead40c1f786c6ad4d343afe0546d..
>>>>>>>>>>>>>>>> 058a1ff9b4cdbd2e1a93acc8bf0365e7d01cc9f4:/libavcodec/pcm-
>>>>>>>>>>>>>>>> blurayenc.c
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> https://git.ffmpeg.org/gitweb/ffmpeg.git/commit/
>>>>>>>>>>>>>>>> 93dfb6afddb278218da7f8c696bf35ede2ba05aa
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20220427/744f724d/attachment-0001.htm>
More information about the Cin
mailing list