[Cin] megapile 12 (freebsd, ffmpeg 5, dynamic build, opencv trim)

[Andrea paz]

> just add this line (-DWITH_JASPER=OFF) without '+' to  your opencv_build file in cinegg src root...?

I tried adding the line with jasper in opencv_build and then compiling
CinGG. The result is the same: the OpenCV plugins are not present.

Ho decommentato la riga con truehd in bdcreate.C e provato a fare un
rendring con "BD Render...".
Render::render_single: Session finished.
** rendered 677 frames in 16.477 secs, 41.088 fps
++ dirname /tmp/bd_20220515-185631/bd.sh
+ sdir=/tmp/bd_20220515-185631
++ cd /tmp/bd_20220515-185631
++ pwd
+ dir=/tmp/bd_20220515-185631
+ PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/opt/rocm-5.1.2/bin:/opt/rocm-5.1.2/hip/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl:/home/paz/cinelerra5/cinelerra-5.1/bin
+ mkdir -p /tmp/bd_20220515-185631/udfs
++ du -cb /tmp/bd_20220515-185631/bd.m2ts
++ tail -1
++ sed -e 's/[  ].*//'
+ sz=44414976
+ blks=25783
+ rm -f /tmp/bd_20220515-185631/bd.udfs
+ '[' -f /tmp/bd_20220515-185631/bd.meta ']'
+ mkudffs -b 2048 /tmp/bd_20220515-185631/bd.udfs 25783
filename=/tmp/bd_20220515-185631/bd.udfs
label=LinuxUDF
uuid=628130f3e97336f3
blocksize=2048
blocks=25783
udfrev=2.01
start=0, blocks=16, type=ERASE
start=16, blocks=4, type=VRS
start=20, blocks=76, type=ERASE
start=96, blocks=16, type=MVDS
start=112, blocks=16, type=ERASE
start=128, blocks=4, type=LVID
start=132, blocks=124, type=ERASE
start=256, blocks=1, type=ANCHOR
start=257, blocks=25264, type=PSPACE
start=25521, blocks=5, type=ERASE
start=25526, blocks=1, type=ANCHOR
start=25527, blocks=73, type=ERASE
start=25600, blocks=16, type=RVDS
start=25616, blocks=166, type=ERASE
start=25782, blocks=1, type=ANCHOR
+ mount -t udf -o loop /tmp/bd_20220515-185631/bd.udfs
/tmp/bd_20220515-185631/udfs
+ bdwrite /tmp/bd_20220515-185631/udfs /tmp/bd_20220515-185631/bd.m2ts
unknown bluray audio format 0 ch

CinGG crashes at the end of rendering; but the bd.m2ts file is
produced anyway. This is not read by VLC but works in mpv. As you
anticipated only 2 audio tracks were produced: The 2 source files were
m2ts (plus a h264 .mov video) with 22 audio channels each.

$ ffprobe bd.m2ts
ffprobe version n5.0 Copyright (c) 2007-2022 the FFmpeg developers
  built with gcc 11.2.0 (GCC)
  configuration: --prefix=/usr --disable-debug --disable-static
--disable-stripping --enable-amf --enable-avisynth --enable-cuda-llvm
--enable-lto --enable-fontconfig --enable-gmp --enable-gnutls
--enable-gpl --enable-ladspa --enable-libaom --enable-libass
--enable-libbluray --enable-libdav1d --enable-libdrm
--enable-libfreetype --enable-libfribidi --enable-libgsm
--enable-libiec61883 --enable-libjack --enable-libmfx
--enable-libmodplug --enable-libmp3lame --enable-libopencore_amrnb
--enable-libopencore_amrwb --enable-libopenjpeg --enable-libopus
--enable-libpulse --enable-librav1e --enable-librsvg --enable-libsoxr
--enable-libspeex --enable-libsrt --enable-libssh --enable-libsvtav1
--enable-libtheora --enable-libv4l2 --enable-libvidstab
--enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp
--enable-libx264 --enable-libx265 --enable-libxcb --enable-libxml2
--enable-libxvid --enable-libzimg --enable-nvdec --enable-nvenc
--enable-shared --enable-version3
  libavutil      57. 17.100 / 57. 17.100
  libavcodec     59. 18.100 / 59. 18.100
  libavformat    59. 16.100 / 59. 16.100
  libavdevice    59.  4.100 / 59.  4.100
  libavfilter     8. 24.100 /  8. 24.100
  libswscale      6.  4.100 /  6.  4.100
  libswresample   4.  3.100 /  4.  3.100
  libpostproc    56.  3.100 / 56.  3.100
[mpegts @ 0x55cd19a640c0] start time for stream 2 is not set in
estimate_timings_from_pts
[mpegts @ 0x55cd19a640c0] stream 2 : no TS found at start of file,
duration not set
[mpegts @ 0x55cd19a640c0] Could not find codec parameters for stream 2
(Audio: ac3 ([131][0][0][0] / 0x0083), 0 channels, fltp): unspecified
sample rate
Consider increasing the value for the 'analyzeduration' (0) and
'probesize' (5000000) options
Input #0, mpegts, from 'bd.m2ts':
  Duration: 00:00:28.24, start: 0.083422, bitrate: 12584 kb/s
  Program 1
  Stream #0:0[0x1011]: Video: h264 (High) ([27][0][0][0] / 0x001B),
yuv420p(tv, bt709, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 23.98
fps, 23.98 tbr, 90k tbn
  Stream #0:1[0x1100](ita): Audio: truehd ([131][0][0][0] / 0x0083),
48000 Hz, stereo, s32 (24 bit)
  Stream #0:2[0x1100]: Audio: ac3 ([131][0][0][0] / 0x0083), 0 channels, fltp


I also add cin5.log and config.log in case you ever need it.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cin-log.tar.gz
Type: application/gzip
Size: 476781 bytes
Desc: not available
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20220515/a7b28ca6/attachment-0001.bin>