[Cin] megapile 12 (freebsd, ffmpeg 5, dynamic build, opencv trim)

Sun May 15 20:48:58 CEST 2022

On Sunday, May 15, 2022, Andrea paz <gamberucci.andrea at gmail.com> wrote:

> > just add this line (-DWITH_JASPER=OFF) without '+' to  your opencv_build
> file in cinegg src root...?
>
> I tried adding the line with jasper in opencv_build and then compiling
> CinGG. The result is the same: the OpenCV plugins are not present.

(

thanks for trying....

>
> Ho decommentato la riga con truehd in bdcreate.C e provato a fare un
> rendring con "BD Render...".
> Render::render_single: Session finished.
> ** rendered 677 frames in 16.477 secs, 41.088 fps
> ++ dirname /tmp/bd_20220515-185631/bd.sh
> + sdir=/tmp/bd_20220515-185631
> ++ cd /tmp/bd_20220515-185631
> ++ pwd
> + dir=/tmp/bd_20220515-185631
> + PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/
> jvm/default/bin:/opt/rocm-5.1.2/bin:/opt/rocm-5.1.2/hip/bin:
> /usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_
> perl:/home/paz/cinelerra5/cinelerra-5.1/bin
> + mkdir -p /tmp/bd_20220515-185631/udfs
> ++ du -cb /tmp/bd_20220515-185631/bd.m2ts
> ++ tail -1
> ++ sed -e 's/[  ].*//'
> + sz=44414976
> + blks=25783
> + rm -f /tmp/bd_20220515-185631/bd.udfs
> + '[' -f /tmp/bd_20220515-185631/bd.meta ']'
> + mkudffs -b 2048 /tmp/bd_20220515-185631/bd.udfs 25783
> filename=/tmp/bd_20220515-185631/bd.udfs
> label=LinuxUDF
> uuid=628130f3e97336f3
> blocksize=2048
> blocks=25783
> udfrev=2.01
> start=0, blocks=16, type=ERASE
> start=16, blocks=4, type=VRS
> start=20, blocks=76, type=ERASE
> start=96, blocks=16, type=MVDS
> start=112, blocks=16, type=ERASE
> start=128, blocks=4, type=LVID
> start=132, blocks=124, type=ERASE
> start=256, blocks=1, type=ANCHOR
> start=257, blocks=25264, type=PSPACE
> start=25521, blocks=5, type=ERASE
> start=25526, blocks=1, type=ANCHOR
> start=25527, blocks=73, type=ERASE
> start=25600, blocks=16, type=RVDS
> start=25616, blocks=166, type=ERASE
> start=25782, blocks=1, type=ANCHOR
> + mount -t udf -o loop /tmp/bd_20220515-185631/bd.udfs
> /tmp/bd_20220515-185631/udfs
> + bdwrite /tmp/bd_20220515-185631/udfs /tmp/bd_20220515-185631/bd.m2ts
> unknown bluray audio format 0 ch

I have workaround for this, just not sure if it makes any sense without
proper ac3/thd interleaving ... currently I think you can try to render
just video in ts and ac3 + thd audio separately, then use thdmerge on audio
and tsmuxer on video ts + result of thdmerge...

>
> CinGG crashes at the end of rendering; but the bd.m2ts file is
> produced anyway. This is not read by VLC but works in mpv. As you
> anticipated only 2 audio tracks were produced: The 2 source files were
> m2ts (plus a h264 .mov video) with 22 audio channels each.
>
> $ ffprobe bd.m2ts
> ffprobe version n5.0 Copyright (c) 2007-2022 the FFmpeg developers
>   built with gcc 11.2.0 (GCC)
>   configuration: --prefix=/usr --disable-debug --disable-static
> --disable-stripping --enable-amf --enable-avisynth --enable-cuda-llvm
> --enable-lto --enable-fontconfig --enable-gmp --enable-gnutls
> --enable-gpl --enable-ladspa --enable-libaom --enable-libass
> --enable-libbluray --enable-libdav1d --enable-libdrm
> --enable-libfreetype --enable-libfribidi --enable-libgsm
> --enable-libiec61883 --enable-libjack --enable-libmfx
> --enable-libmodplug --enable-libmp3lame --enable-libopencore_amrnb
> --enable-libopencore_amrwb --enable-libopenjpeg --enable-libopus
> --enable-libpulse --enable-librav1e --enable-librsvg --enable-libsoxr
> --enable-libspeex --enable-libsrt --enable-libssh --enable-libsvtav1
> --enable-libtheora --enable-libv4l2 --enable-libvidstab
> --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp
> --enable-libx264 --enable-libx265 --enable-libxcb --enable-libxml2
> --enable-libxvid --enable-libzimg --enable-nvdec --enable-nvenc
> --enable-shared --enable-version3
>   libavutil      57. 17.100 / 57. 17.100
>   libavcodec     59. 18.100 / 59. 18.100
>   libavformat    59. 16.100 / 59. 16.100
>   libavdevice    59.  4.100 / 59.  4.100
>   libavfilter     8. 24.100 /  8. 24.100
>   libswscale      6.  4.100 /  6.  4.100
>   libswresample   4.  3.100 /  4.  3.100
>   libpostproc    56.  3.100 / 56.  3.100
> [mpegts @ 0x55cd19a640c0] start time for stream 2 is not set in
> estimate_timings_from_pts
> [mpegts @ 0x55cd19a640c0] stream 2 : no TS found at start of file,
> duration not set
> [mpegts @ 0x55cd19a640c0] Could not find codec parameters for stream 2
> (Audio: ac3 ([131][0][0][0] / 0x0083), 0 channels, fltp): unspecified
> sample rate
> Consider increasing the value for the 'analyzeduration' (0) and
> 'probesize' (5000000) options
> Input #0, mpegts, from 'bd.m2ts':
>   Duration: 00:00:28.24, start: 0.083422, bitrate: 12584 kb/s
>   Program 1
>   Stream #0:0[0x1011]: Video: h264 (High) ([27][0][0][0] / 0x001B),
> yuv420p(tv, bt709, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 23.98
> fps, 23.98 tbr, 90k tbn
>   Stream #0:1[0x1100](ita): Audio: truehd ([131][0][0][0] / 0x0083),
> 48000 Hz, stereo, s32 (24 bit)
>   Stream #0:2[0x1100]: Audio: ac3 ([131][0][0][0] / 0x0083), 0 channels,
> fltp
>
>
> I also add cin5.log and config.log in case you ever need it.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20220515/12c0ba39/attachment.htm>