[Cin] Tested vaapi hwaccel presets

[Phyllis Smith]

>
> Note, we do not talk about changing default globally, just about machinery
> behind


Sorry, I misunderstood and thought you meant default for all instead of
Andrey's packages.  (I need to pay more attention to the details in the
email.)
FYI - I believe for Fedora 40, oneVPL is installed with the O/S by default
BUT I had to install oneVPL-devel to build CinGG.

but at 3am (GMT+3) I think we surely can stop holding our breath for
same-minute answer ;)


Andrew, I just send email when I happen to see it, hoping that you ignore
it until the next day - I will endeavor to track time better.

I did not looked at labels issue yet


MatN will not be able to address the labels issue until Wednesday so we
should probably wait until we hear back from him -- it may be an anomaly
that may not be a bug due to some kind of interruption or it could just be
a really esoteric bug.  I did update the BT #666.


On Mon, Dec 2, 2024 at 5:16 PM Andrew Randrianasulu <randrianasulu at gmail.com>
wrote:

>
>
> вт, 3 дек. 2024 г., 02:42 Phyllis Smith <phylsmith2017 at gmail.com>:
>
>> Well, yes, BUT the point is people have procedures set up to build this
>> automatically for years and now all of a sudden they will have to install
>> more software.  Probably not a good idea.
>>
>
> Note, we do not talk about changing default globally, just about machinery
> behind
>
> https://github.com/einhander/cin-gg-packages/releases
>
> but at 3am (GMT+3) I think we surely can stop holding our breath for
> same-minute answer ;)
>
> Good night, sorry I did not looked at labels issue yet
>
>
>> On Mon, Dec 2, 2024 at 4:40 PM Andrew Randrianasulu <
>> randrianasulu at gmail.com> wrote:
>>
>>>
>>>
>>> вт, 3 дек. 2024 г., 02:36 Phyllis Smith <phylsmith2017 at gmail.com>:
>>>
>>>> Unfortunately, it won't even build when I add:   --with-onevpl    on
>>>> the configure line:
>>>> configure: error: requires onevpl support.
>>>> make: *** No targets specified and no makefile found.  Stop.
>>>>
>>>> This is my 6 year old AMD laptop.
>>>>
>>>
>>> you need to install
>>>
>>> https://github.com/intel/libvpl
>>>
>>> I used 2.13 for my dummy tests, but something down to 2.6 (I think)
>>> should work, at least as build requirement.
>>>
>>>
>>>
>>>
>>>>>
>>>>>
>>>>>
>>>> On Mon, Dec 2, 2024 at 4:01 PM Terje J. Hanssen <
>>>> terjejhanssen at gmail.com> wrote:
>>>>
>>>>>
>>>>> Den 02.12.2024 23:32, skrev Phyllis Smith:
>>>>>
>>>>> Adding OneVPL by default, which only works on the latest Intel
>>>>> computers and not on older ones or AMD, would not be a good idea;
>>>>> especially not for the RPM packaging.  That is my opinion based on our
>>>>> attempt to keep CinGG generically usable on older computers and even 32-bit
>>>>> systems.
>>>>>
>>>>>
>>>>> I didn't think "onevpl on" would prohibit other than Intel hardware to
>>>>> work as else, and that hwaccell work or not, dependent of the platform
>>>>> support.
>>>>> Actually my thought was to test what legacy Intel hardware are good
>>>>> for. Is possibly a Cingg user-switch possible instead?
>>>>>
>>>>>
>>>>>
>>>>> I have yet to go through the last 5 attachment patches that Andrew
>>>>> graciously put all in one place for viability on all systems.
>>>>>
>>>>> On Mon, Dec 2, 2024 at 2:01 PM Terje J. Hanssen <
>>>>> terjejhanssen at gmail.com> wrote:
>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Den 30.11.2024 01:03, skrev Andrew Randrianasulu:
>>>>>>
>>>>>>
>>>>>>
>>>>>> сб, 30 нояб. 2024 г., 01:07 Phyllis Smith via Cin <
>>>>>> cin at lists.cinelerra-gg.org>:
>>>>>>
>>>>>>> Andrew, should these and the QSV presets be checked into GIT now
>>>>>>> that Terje has tested them on his specific hardware?
>>>>>>>
>>>>>>
>>>>>> yes, but 10bit ones require patch for themselves and recent one
>>>>>> removing addition of ildct flag for some qsv encoders ....
>>>>>>
>>>>>>
>>>>>> "Exp: do not set ildct flag for qsv_av1/h264/vp9"
>>>>>> 0001-yet-another-10bit-attempt.patch
>>>>>> 0002-Hopefully-wire-up-various-cin_pix_fmt-for-vaapi-enco.patch
>>>>>>
>>>>>> re-attached so you do not need to hunt them in mailthreads ....
>>>>>>
>>>>>>
>>>>>>
>>>>>> Is the onevpl patch already included in the buildsystem?
>>>>>> It was said it was "default to off", so I wonder if it will be
>>>>>> available or "on" in the upcoming rpm?
>>>>>>
>>>>>>
>>>>>>
>>>>>> I also have mediacodec/termux related profiles, and one hackfix for
>>>>>> mjpegtools failing to build here on clang.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> P.S. There will not be new Appimages created at the end of this
>>>>>>> month, but will wait until December.
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Nov 26, 2024 at 3:52 PM Terje J. Hanssen <
>>>>>>> terjejhanssen at gmail.com> wrote:
>>>>>>>
>>>>>>>> Attached tested vaapi hwaccel presets as gzip'd tar file
>>>>>>>>
>>>>>>>> av1_vaapi_10b420.mp4
>>>>>>>> av1_vaapi_10b420.webm
>>>>>>>> av1_vaapi_8b420.mp4
>>>>>>>> av1_vaapi_8b420.webm
>>>>>>>> h264_vaapi_8b420.mp4
>>>>>>>> hevc_vaapi_10b420.mp4
>>>>>>>> hevc_vaapi_10b422.mp4
>>>>>>>> hevc_vaapi_8b420.mp4
>>>>>>>> vp9_vaapi_10b420.mp4
>>>>>>>> vp9_vaapi_10b420.webm
>>>>>>>> vp9_vaapi_8b420.mp4
>>>>>>>> vp9_vaapi_8b420.webm
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>> Cin mailing list
>>>>>>> Cin at lists.cinelerra-gg.org
>>>>>>> https://lists.cinelerra-gg.org/mailman/listinfo/cin
>>>>>>>
>>>>>>
>>>>>>
>>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20241203/3eab335c/attachment.htm>