[Cin] Tested vaapi hwaccel presets
Terje J. Hanssen
terjejhanssen at gmail.com
Sun Dec 29 17:04:07 CET 2024
On 03.12.2024 17:25, Phyllis Smith wrote:
>
> Note, we do not talk about changing default globally, just about
> machinery behind
>
>
> Sorry, I misunderstood and thought you meant default for all instead
> of Andrey's packages. (I need to pay more attention to the details in
> the email.)
> FYI - I believe for Fedora 40, oneVPL is installed with the O/S by
> default BUT I had to install oneVPL-devel to build CinGG.
I started Cingg on Leap 15.5 with the latest RPM
Cinelerra Infinity - built: Dec 29 2024 03:47:56
and tried to test the "h264/5_vaapi,mp4" and "h264/5_qsv.mp4" presets.
But as they didn't work, I guess the onVPL support is not added (yet)?
>
> but at 3am (GMT+3) I think we surely can stop holding our breath
> for same-minute answer ;)
>
> Andrew, I just send email when I happen to see it, hoping that you
> ignore it until the next day - I will endeavor to track time better.
>
> I did not looked at labels issue yet
>
> MatN will not be able to address the labels issue until Wednesday so
> we should probably wait until we hear back from him -- it may be an
> anomaly that may not be a bug due to some kind of interruption or it
> could just be a really esoteric bug. I did update the BT #666.
>
>
> On Mon, Dec 2, 2024 at 5:16 PM Andrew Randrianasulu
> <randrianasulu at gmail.com> wrote:
>
>
>
> вт, 3 дек. 2024 г., 02:42 Phyllis Smith <phylsmith2017 at gmail.com>:
>
> Well, yes, BUT the point is people have procedures set up to
> build this automatically for years and now all of a sudden
> they will have to install more software. Probably not a good
> idea.
>
>
> Note, we do not talk about changing default globally, just about
> machinery behind
>
> https://github.com/einhander/cin-gg-packages/releases
>
> but at 3am (GMT+3) I think we surely can stop holding our breath
> for same-minute answer ;)
>
> Good night, sorry I did not looked at labels issue yet
>
>
> On Mon, Dec 2, 2024 at 4:40 PM Andrew Randrianasulu
> <randrianasulu at gmail.com> wrote:
>
>
>
> вт, 3 дек. 2024 г., 02:36 Phyllis Smith
> <phylsmith2017 at gmail.com>:
>
> Unfortunately, it won't even build when I add:
> --with-onevpl on the configure line:
>
>
>
> configure: error: requires onevpl support.
> make: *** No targets specified and no makefile found.
> Stop.
>
> This is my 6 year old AMD laptop.
>
>
> you need to install
>
> https://github.com/intel/libvpl
>
> I used 2.13 for my dummy tests, but something down to 2.6
> (I think) should work, at least as build requirement.
>
>
>
>
>
>
>
>
> On Mon, Dec 2, 2024 at 4:01 PM Terje J. Hanssen
> <terjejhanssen at gmail.com> wrote:
>
>
> Den 02.12.2024 23:32, skrev Phyllis Smith:
>> Adding OneVPL by default, which only works on the
>> latest Intel computers and not on older ones or
>> AMD, would not be a good idea; especially not for
>> the RPM packaging. That is my opinion based on
>> our attempt to keep CinGG generically usable on
>> older computers and even 32-bit systems.
>
> I didn't think "onevpl on" would prohibit other
> than Intel hardware to work as else, and that
> hwaccell work or not, dependent of the platform
> support.
> Actually my thought was to test what legacy Intel
> hardware are good for. Is possibly a Cingg
> user-switch possible instead?
>
>>
>> I have yet to go through the last 5 attachment
>> patches that Andrew graciously put all in one
>> place for viability on all systems.
>>
>> On Mon, Dec 2, 2024 at 2:01 PM Terje J. Hanssen
>> <terjejhanssen at gmail.com> wrote:
>>
>>
>>
>>
>> Den 30.11.2024 01:03, skrev Andrew Randrianasulu:
>>>
>>>
>>> сб, 30 нояб. 2024 г., 01:07 Phyllis Smith
>>> via Cin <cin at lists.cinelerra-gg.org>:
>>>
>>> Andrew, should these and the QSV presets
>>> be checked into GIT now that Terje has
>>> tested them on his specific hardware?
>>>
>>>
>>> yes, but 10bit ones require patch for
>>> themselves and recent one removing addition
>>> of ildct flag for some qsv encoders ....
>>>
>>> "Exp: do not set ildct flag for
>>> qsv_av1/h264/vp9"
>>> 0001-yet-another-10bit-attempt.patch
>>> 0002-Hopefully-wire-up-various-cin_pix_fmt-for-vaapi-enco.patch
>>>
>>> re-attached so you do not need to hunt them
>>> in mailthreads ....
>>
>>
>> Is the onevpl patch already included in the
>> buildsystem?
>> It was said it was "default to off", so I
>> wonder if it will be available or "on" in the
>> upcoming rpm?
>>
>>
>>>
>>> I also have mediacodec/termux related
>>> profiles, and one hackfix for mjpegtools
>>> failing to build here on clang.
>>>
>>>
>>>
>>>
>>>
>>>
>>> P.S. There will not be new Appimages
>>> created at the end of this month, but
>>> will wait until December.
>>>
>>>
>>> On Tue, Nov 26, 2024 at 3:52 PM Terje J.
>>> Hanssen <terjejhanssen at gmail.com> wrote:
>>>
>>> Attached tested vaapi hwaccel
>>> presets as gzip'd tar file
>>>
>>> av1_vaapi_10b420.mp4
>>> av1_vaapi_10b420.webm
>>> av1_vaapi_8b420.mp4
>>> av1_vaapi_8b420.webm
>>> h264_vaapi_8b420.mp4
>>> hevc_vaapi_10b420.mp4
>>> hevc_vaapi_10b422.mp4
>>> hevc_vaapi_8b420.mp4
>>> vp9_vaapi_10b420.mp4
>>> vp9_vaapi_10b420.webm
>>> vp9_vaapi_8b420.mp4
>>> vp9_vaapi_8b420.webm
>>>
>>>
>>> --
>>> Cin mailing list
>>> Cin at lists.cinelerra-gg.org
>>> https://lists.cinelerra-gg.org/mailman/listinfo/cin
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20241229/bcc845b1/attachment-0001.htm>
More information about the Cin
mailing list