[Cin] another set of test profiles
Terje J. Hanssen
terjejhanssen at gmail.com
Mon Oct 14 22:54:59 CEST 2024
Den 14.10.2024 21:53, skrev Terje J. Hanssen:
>
>
>
> Den 14.10.2024 21:30, skrev Andrew Randrianasulu:
>>
>>
>> пн, 14 окт. 2024 г., 22:20 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>
>>
>>
>>
>> Den 14.10.2024 20:03, skrev Andrew Randrianasulu:
>>>
>>>
>>> On Mon, Oct 14, 2024 at 8:46 PM Andrew Randrianasulu
>>> <randrianasulu at gmail.com> wrote:
>>>
>>>
>>>
>>> пн, 14 окт. 2024 г., 18:58 Terje J. Hanssen
>>> <terjejhanssen at gmail.com>:
>>>
>>>
>>> Den 14.10.2024 00:38, skrev Andrew Randrianasulu:
>>>>
>>>>
>>>> пн, 14 окт. 2024 г., 01:36 Phyllis Smith
>>>> <phylsmith2017 at gmail.com>:
>>>>
>>>> Andrew, so it seems prudent to check into GIT, the
>>>> av1_vaapi.mp4 render format (after successfully
>>>> tested of course); but what about the QSV encoders?
>>>>
>>>>
>>>>
>>>> wait for Terje's testing OR try to build oneVPL-cpu (it
>>>> sort of circles back to different branch of ffmpeg, so
>>>> ffmpeg will think it uses qsv but it in fact will use
>>>> another ffmpeg .... well, in theory! it does not work
>>>> for me on 32-bit!)
>>>>
>>>>
>>>> On Sun, Oct 13, 2024 at 2:36 PM Andrew
>>>> Randrianasulu via Cin <cin at lists.cinelerra-gg.org>
>>>> wrote:
>>>>
>>>> hopefully with very silly top-line-as-comment
>>>> error fixed
>>>>
>>>> SORRY!
>>>>
>>>
>>> I saved the 6 profiles in ffmpeg/video and tested them
>>> with SD-DV input.
>>>
>>>
>>> in cinelerra-5.1/bin/ffmpeg/video
>>>
>>
>> Yes, in /home/cinelerra/cinelerra-5.1/ffmpeg/video
>>
>>
>>
>> you need either execute make install or put them in
>> cinelerra/bin/ffmpeg/video manually
>
> Sorry, my fault that I had "lost" that bin level in the path. Actually
> I also found the mentioned dfl file there..
> I save the complete set of test profiles from this first post in
> /home/cinelerra/cinelerra-5.1/bin/ffmpeg/video and retest them
>
That went much better. Now 5 of 6 profiles work, except 2) that still
not work:
2)
dv01_07_av1_qsv.mp4
Audio preset: h264.mp4
Video compression: av1_qsv.mp4
Pixels: nv12
int FFMPEG::init_encoder(const char*):
mismatch audio/video file format: /Videoklipp/QSV/dv01_07_av1_qsv.mp4
Doesn't work with Audio disabled either
>>
>>
>>>
>>> with cin launched as bin/cin from this directory?
>>>
>>
>> /home/cinelerra/cinelerra-5.1# bin/cin (all testing as root)
>>
>>
>> so, permission problem is not for you .....
>>
>>
>>
>>>
>>> sorry for such pedantry, but I get same mismatch and
>>> generally just moving commentary to second line worked.
>>>
>>> may be you need additional dfl file in ffmpeg/audio ?
>>>
>>
>> You remember I also got - and thought I saved 13/10:
>> "can you test those two attached files (profile for av1_qsv.webm
>> and default file for av1_qsv, put both in bin/ffmpeg/video) ?"
>>
>> But I have only
>> /home/cinelerra/cinelerra-5.1/ffmpeg/video # lls -1 av1*qsv*
>> av1_qsv.mp4
>> av1_qsv.webm
>>
>> That is no av1_qsv.dfl there!
>>
>>
>>
>>
>> note, cinelerra-5.1/ffmpeg is that git controls, normally.
>>
>> on make install files from there copied to bin/ffmpeg if single-user
>> or into /usr/share/cin/ffmpeg if system install.
>>
>> so please double-check that files you get from me in
>> bin/ffmpeg/video, not just in ffmpeg/video!
>>
>> Also check out nuclear option (tar.gz) You can see into it via say
>> midnight commander (enter on archive) and copy files you need to
>> cinelerra-5.1/bin/ffmpeg
>>
>> sorry for confusion!
>>
>>
>>
>>>
>>> can you test without audio (checkbox audio unchecked)?
>>>
>>
>> Tested 2) below without audio (unchecked): same error
>>
>>>
>>>
>>> Only 1) av1_qsv.webm of them worked, so hopefully I have
>>> installed and tested them correctly(?)
>>>
>>>
>>> 1) av1_qsv.webm:
>>> webm av1_qsv
>>> # only usable with ext. ffmpeg
>>> cin_pix_fmt=nv12
>>>
>>> works with pixelformats nv12 AND p010le
>>>
>>>
>>> 2) av1_qsv.mp4
>>> # only usable with ext. ffmpeg
>>> mp4 av1_qsv
>>> cin_pix_fmt=nv12
>>>
>>> doesn't work: pixelformat nv12
>>> int FFMPEG::init_encoder(const char*):
>>> mismatch audio/video file format
>>>
>>>
>>>
>>> does adding attached file into ffmpeg/audio/ fix this?
>>
>> Sorry, no change for 2)
>> But is the attached av1_qsv.webm for av1_qsv.mp4 also, where
>> audio preset is h264.mp4 and no libvorbis visible option
>> cat /home/cinelerra/cinelerra-5.1/ffmpeg/audio/av1_qsv.webm
>> webm libvorbis
>>
>>
>>
>>
>>
>>
>>>
>>>
>>> 3) av1_vaapi.mp4
>>> mp4 av1_vaapi
>>> cin_hw_dev=vaapi
>>> profile=main
>>>
>>> not available?
>>>
>>>
>>> 4) h264_qsv.mp4
>>> mp4 h264_qsv
>>> # only usable with ext. ffmpeg
>>> profile=high
>>> cin_pix_fmt=nv12
>>>
>>> doesn't work:
>>> int FFMPEG::init_encoder(const char*):
>>> mismatch audio/video file format:
>>>
>>>
>>> 5) hevc_qsv.mp4
>>> mp4 hevc_qsv
>>> # only usable with ext. ffmpeg, another pixfmt is yuyv422
>>> profile=main
>>> cin_pix_fmt=nv12
>>>
>>> doesn't work:
>>> int FFMPEG::init_encoder(const char*):
>>> mismatch audio/video file format:
>>>
>>>
>>> 6)
>>> cat vp9_qsv.mp4
>>> mp4 vp9_qsv
>>> # only usable with ext. ffmpeg
>>>
>>> doesn't work:
>>> int FFMPEG::init_encoder(const char*):
>>> mismatch audio/video file format:
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20241014/f7131c19/attachment-0001.htm>
More information about the Cin
mailing list