[Cin] another set of test profiles

[Andrew Randrianasulu]

пн, 14 окт. 2024 г., 23:55 Terje J. Hanssen <terjejhanssen at gmail.com>:

>
>
> Den 14.10.2024 21:53, skrev Terje J. Hanssen:
>
>
>
>
> Den 14.10.2024 21:30, skrev Andrew Randrianasulu:
>
>
>
> пн, 14 окт. 2024 г., 22:20 Terje J. Hanssen <terjejhanssen at gmail.com>:
>
>>
>>
>>
>> Den 14.10.2024 20:03, skrev Andrew Randrianasulu:
>>
>>
>>
>> On Mon, Oct 14, 2024 at 8:46 PM Andrew Randrianasulu <
>> randrianasulu at gmail.com> wrote:
>>
>>>
>>>
>>> пн, 14 окт. 2024 г., 18:58 Terje J. Hanssen <terjejhanssen at gmail.com>:
>>>
>>>>
>>>> Den 14.10.2024 00:38, skrev Andrew Randrianasulu:
>>>>
>>>>
>>>>
>>>> пн, 14 окт. 2024 г., 01:36 Phyllis Smith <phylsmith2017 at gmail.com>:
>>>>
>>>>> Andrew, so it seems prudent to check into GIT, the av1_vaapi.mp4
>>>>> render format (after successfully tested of course); but what about the QSV
>>>>> encoders?
>>>>>
>>>>
>>>>
>>>> wait for Terje's testing OR try to build oneVPL-cpu (it sort of circles
>>>> back to different branch of ffmpeg, so ffmpeg will think it uses qsv but it
>>>> in fact will use another ffmpeg .... well, in theory! it does not work for
>>>> me on 32-bit!)
>>>>
>>>>>
>>>>> On Sun, Oct 13, 2024 at 2:36 PM Andrew Randrianasulu via Cin <
>>>>> cin at lists.cinelerra-gg.org> wrote:
>>>>>
>>>>>> hopefully with very silly top-line-as-comment error fixed
>>>>>>
>>>>>> SORRY!
>>>>>>
>>>>>>
>>>> I saved the 6 profiles in ffmpeg/video and tested them with SD-DV input.
>>>>
>>>
>>> in cinelerra-5.1/bin/ffmpeg/video
>>>
>>
>> Yes, in /home/cinelerra/cinelerra-5.1/ffmpeg/video
>>
>
>
> you need either execute make install or put them in
> cinelerra/bin/ffmpeg/video manually
>
>
> Sorry, my fault that I had "lost" that bin level in the path. Actually I
> also found the mentioned dfl file there..
> I save the complete set of test profiles from this first post in
> /home/cinelerra/cinelerra-5.1/bin/ffmpeg/video and retest them
>
>
> That went much better. Now 5 of 6 profiles work, except 2) that still not
> work:
>
> 2)
> dv01_07_av1_qsv.mp4
> Audio preset: h264.mp4
> Video compression: av1_qsv.mp4
> Pixels: nv12
>
> int FFMPEG::init_encoder(const char*):
> mismatch audio/video file format: /Videoklipp/QSV/dv01_07_av1_qsv.mp4
>
> Doesn't work with Audio disabled either
>


can you double-check that first line in this file reads

mp4 av1_qsv

and comment (line starting with #)  is second?

may be I missed this one ...





>
>
>
>
>
>
>>> with cin launched as bin/cin from this directory?
>>>
>>
>> /home/cinelerra/cinelerra-5.1# bin/cin (all testing as root)
>>
>
> so, permission problem is not for you .....
>
>
>
>>
>>> sorry for such pedantry, but I get same mismatch and generally just
>>> moving commentary to second line worked.
>>>
>>> may be you need additional dfl file in ffmpeg/audio ?
>>>
>>
>> You remember I also got - and thought I saved 13/10:
>> "can you test those two attached files (profile for av1_qsv.webm and
>> default file for av1_qsv, put both in bin/ffmpeg/video) ?"
>>
>> But I have only
>> /home/cinelerra/cinelerra-5.1/ffmpeg/video # lls -1 av1*qsv*
>> av1_qsv.mp4
>> av1_qsv.webm
>>
>> That is no av1_qsv.dfl there!
>>
>
>
>
> note, cinelerra-5.1/ffmpeg is that git controls, normally.
>
> on make install files from there copied to bin/ffmpeg if single-user or
> into /usr/share/cin/ffmpeg if system install.
>
> so please double-check that files you get from me in bin/ffmpeg/video, not
> just in ffmpeg/video!
>
> Also check out nuclear option (tar.gz) You can see into it via say
> midnight commander (enter on archive) and copy files you need to
> cinelerra-5.1/bin/ffmpeg
>
> sorry for confusion!
>
>>
>>
>>
>>> can you test without audio (checkbox audio unchecked)?
>>>
>>
>> Tested 2) below without audio (unchecked): same error
>>
>>
>>>
>>> Only 1) av1_qsv.webm of them worked, so hopefully I have installed and
>>>> tested them correctly(?)
>>>>
>>>>
>>>> 1) av1_qsv.webm:
>>>> webm av1_qsv
>>>> # only usable with ext. ffmpeg
>>>> cin_pix_fmt=nv12
>>>>
>>>> works with pixelformats nv12 AND p010le
>>>>
>>>>
>>>> 2) av1_qsv.mp4
>>>> # only usable with ext. ffmpeg
>>>> mp4 av1_qsv
>>>> cin_pix_fmt=nv12
>>>>
>>>> doesn't work: pixelformat nv12
>>>> int FFMPEG::init_encoder(const char*):
>>>> mismatch audio/video file format
>>>>
>>>
>>
>> does adding attached file into ffmpeg/audio/ fix this?
>>
>>
>> Sorry, no change for 2)
>> But is the attached av1_qsv.webm  for av1_qsv.mp4 also, where audio
>> preset is h264.mp4 and no libvorbis visible option
>> cat /home/cinelerra/cinelerra-5.1/ffmpeg/audio/av1_qsv.webm
>> webm libvorbis
>>
>>
>>
>>
>>
>>
>>
>>
>>>
>>>>
>>>> 3) av1_vaapi.mp4
>>>> mp4 av1_vaapi
>>>> cin_hw_dev=vaapi
>>>> profile=main
>>>>
>>>> not available?
>>>>
>>>>
>>>> 4) h264_qsv.mp4
>>>> mp4 h264_qsv
>>>> # only usable with ext. ffmpeg
>>>> profile=high
>>>> cin_pix_fmt=nv12
>>>>
>>>> doesn't work:
>>>> int FFMPEG::init_encoder(const char*):
>>>> mismatch audio/video file format:
>>>>
>>>>
>>>> 5) hevc_qsv.mp4
>>>> mp4 hevc_qsv
>>>> # only usable with ext. ffmpeg, another pixfmt is yuyv422
>>>> profile=main
>>>> cin_pix_fmt=nv12
>>>>
>>>> doesn't work:
>>>> int FFMPEG::init_encoder(const char*):
>>>> mismatch audio/video file format:
>>>>
>>>>
>>>> 6)
>>>> cat vp9_qsv.mp4
>>>> mp4 vp9_qsv
>>>> # only usable with ext. ffmpeg
>>>>
>>>> doesn't work:
>>>> int FFMPEG::init_encoder(const char*):
>>>> mismatch audio/video file format:
>>>>
>>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20241014/9ea82a0f/attachment-0001.htm>