[Cin] Vulkan hevc hdr decode regression on ffmpeg master?

Andrew Randrianasulu randrianasulu at gmail.com
Mon May 19 02:21:13 CEST 2025


пн, 19 мая 2025 г., 03:04 Phyllis Smith <phylsmith2017 at gmail.com>:

> Thanks. I suspect patch8 was aimed at mpeg4 (old, ala xvid, not h265)
>> playback via some hw accelerated method? I'll try some files I have from
>> those old times ...
>>
> I loaded small h263 videos in ffmpeg 7.0 (current) which would run
> h263dec.c (I assume) and then encoded them using h264.mp4 format.  I then
> did the same thing in the ffmpeg.git version (future version 8.0) where
> patch8 was deleted.  Visually detected no problem and when I used the
> patchbay arithmetic subtract on the 2 versions of encoded files, they
> showed no anomalies.
>

I am going by my understanding of context diff:



--- a/libavcodec/h263dec.c
+++ b/libavcodec/h263dec.c
@@ -623,7 +623,7 @@
     if (CONFIG_MPEG4_DECODER && avctx->codec_id == AV_CODEC_ID_MPEG4)
         ff_mpeg4_frame_end(avctx, buf, buf_size);

-    if (!s->divx_packed && avctx->hwaccel)
+    if (s->divx_packed && avctx->hwaccel)
         ff_thread_finish_setup(avctx);


yes, file named h263  but also serves (or served? if patch not applicable
anymore) role in decoding

DiVX type of codecs, old msmpeg4 was first of them, divx3/5/XVID followed

So, *I think* you need to raid

samples.mplayerhq.hu

and get some "packed B frame" xvid (or may be just make one with Avidemux?)
and then look if your vainfo/vdpauinfo shows MPEG4 decoding, set cingg to
this decode accel, and play vid in both sw and hw decode mode ?

Sorry still not moved myself to check it out .....





> But I completely re-run make clean,  ./autogen.sh/configure/make dance
>>
> Finally, it compiled but I am not sure what made the difference as I
> always use "make clean" and then run "bld.sh" which includes "autogen.sh";
> i.e. -
>
>> #!/bin/bash
>> ...
>> ( ./autogen.sh
>>   ./configure --with-single-user --with-git-ffmpeg=
>> https://git.ffmpeg.org/ffmpeg.git
>>   make && make install ) 2>&1 | tee log
>> mv Makefile Makefile.cfg
>> cp Makefile.devel Makefile
>>
>
>
> On Sat, May 17, 2025 at 6:04 PM Andrew Randrianasulu <
> randrianasulu at gmail.com> wrote:
>
>>
>>
>> вс, 18 мая 2025 г., 02:56 Phyllis Smith <phylsmith2017 at gmail.com>:
>>
>>> Checked into GIT the updated ffmpeg.git.patches for future potential
>>> upgrade to ffmpeg version 8.0.  And deleted ffmpeg.git.patch8 after
>>> attempting to determine what it was actually for and could find no
>>> information on that when included sometime in 2019 as patch7.  It is
>>> possible that it is no longer needed though - it may have been intended as
>>> a speed improvement; but if some relevant error resurfaces, it can then be
>>> revisited.
>>>
>>
>>
>> Thanks. I suspect patch8 was aimed at mpeg4 (old, ala xvid, not h265)
>> playback via some hw accelerated method? I'll try some files I have from
>> those old times ...
>>
>>
>>
>>> Andrea, the failure in your last attached cin5.log as shown below
>>> appears to be due to commenting out libpostproc.a in configure.ac
>>> because that is needed by cinelerra-5.1/mpeg2enc build.
>>>
>>>> make[2]: *** [Makefile:75: x86_64/hveg2enc] Error 1
>>>> make[2]: uscita dalla directory
>>>> «/home/paz/cinelerra5/cinelerra-5.1/mpeg2enc»
>>>>
>>>
>>
>> For me deleting libpostproc.a from configure.ac worked for compiling
>> with ffmpeg.git
>>
>> But I completely re-run make clean,  ./autogen.sh/configure/make dance
>>
>> not sure why it did not work for you ....
>> make sure your user can rewrite global_config in the root of cinelerra's
>> main src tree? (if you tried building from root and then from ordinary user)
>>
>>>
>>>
>>> On Wed, May 14, 2025 at 7:49 AM Andrew Randrianasulu <
>>> randrianasulu at gmail.com> wrote:
>>>
>>>> On Wed, May 14, 2025 at 1:31 PM Andrew Randrianasulu
>>>> <randrianasulu at gmail.com> wrote:
>>>> >
>>>> > So I was experimenting  with Vulkan decoding in cinelerra-gg.
>>>> >
>>>> > After some fight I get build using ffmpeg git
>>>> >
>>>> > commit 038314bc6be2f35a82e9fba2228bcac2e4fee648 for ffmpeg
>>>> >
>>>> > here is bunch of errors like this:
>>>> >
>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 296
>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 9
>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 296
>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 8
>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 298
>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 8
>>>> > [hevc @ 0x6f789480] Could not find ref with POC 300
>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 300
>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 300
>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 302
>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f789480] Could not find ref with POC 304
>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 304
>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 304
>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 306
>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f789480] Could not find ref with POC 308
>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 308
>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 308
>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 310
>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f789480] Could not find ref with POC 312
>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 312
>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 312
>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 314
>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f789480] Could not find ref with POC 316
>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 316
>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 316
>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 318
>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f789480] Could not find ref with POC 320
>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 320
>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 320
>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 322
>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f789480] Could not find ref with POC 324
>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 324
>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 324
>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 326
>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f789480] Could not find ref with POC 328
>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 328
>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 328
>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 330
>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>> > [hevc @ 0x6f789480] Could not find ref with POC 332
>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 332
>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>> >
>>>> > file itself:
>>>> >
>>>> https://drive.google.com/file/d/1Ic9DZXMSo07EJMqCFaQRKSSrSw6y1mYv/view
>>>> >
>>>> > But I see some kind of first frame corruption I never saw on 7.0 build
>>>> >
>>>> > https://paste.pics/860707666060d195485e07ea7b057ce8
>>>> >
>>>> > and speed kinda down from 58 fps to just 50-51  relative to ffmpeg
>>>> libs 7.0?
>>>> >
>>>> > hw:
>>>> > 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
>>>> > [AMD/ATI] Lexa PRO [Radeon 540/540X/550/550X / RX 540X/550/550X] (rev
>>>> > c7)
>>>> >
>>>> > mesa:
>>>> >
>>>> > OpenGL renderer string: AMD Radeon RX 550 / 550 Series (radeonsi,
>>>> > polaris12, ACO, DRM 3.61, 6.12.26-x64)
>>>> > OpenGL core profile version string: 4.6 (Core Profile) Mesa
>>>> > 25.2.0-devel (git-ef63e3e4d2)
>>>> >
>>>> > cingg home git:
>>>> > git://git.cinelerra-gg.org/goodguy/cinelerra.git
>>>> >
>>>> > I set two evn. variables specific to my system, but mostly I wanted to
>>>> > get libplacebo and libzimg for HDR->SDR conversion
>>>> >
>>>> > EXTRA_LIBS :=  -lOpenCL -lSvtAv1Enc -lvpl -ldav1d -lxvidcore -lass
>>>> > -lbluray -lsnappy -lzimg -lplacebo -lshaderc_shared -lnuma -lva
>>>> > -lva-x11 `pkg-config --libs x11` -lva-drm -ldl
>>>> > FFMPEG_EXTRA_CFG :=  --enable-libvpl --disable-doc --enable-opencl
>>>> > --enable-libsvtav1 --enable-frei0r --enable-libdav1d --enable-libzimg
>>>> > --enable-libxvid --enable-libass --enable-libbluray --enable-libsnappy
>>>> > --enable-libshaderc --enable-libplacebo --enable-vulkan
>>>> > --disable-debug --extra-cflags=-I/usr/local/include/vpl
>>>> > --extra-cflags=-I/usr/include/svt-av1 --extra-ldflags=" -lva
>>>> > `pkg-config --libs libva` -lva-x11 -lva-drm -ldl"
>>>> >
>>>> >
>>>> > cingg configure:
>>>> >
>>>> > ./configure --with-git-ffmpeg=https://git.ffmpeg.org/ffmpeg.git
>>>> > --with-single-user --enable-libsvtav1 --disable-dav1d
>>>> >
>>>> > I used bunch of patches (attached, done by Phyllis and me) and
>>>> > manually removed posprocess.a ref. from our configure.ac for now
>>>>
>>>>
>>>> One more patch/hack just for making building easier attached (on top
>>>> of 0001-3 patches for cingg)
>>>>
>>>> ffmpeg.git patches  go into thirdparty/src, and you probably want to
>>>> move away ffmpeg.git.patch8 out of  this directory so it will not fail
>>>> patching
>>>>
>>>>
>>>>
>>>> >
>>>> > there is still some problem with attaching ffmpeg filters
>>>> > per-input-file, but main Vulkan decode problem still visible without
>>>> > any filters
>>>> >
>>>> > I run just-compiled cin binary like this:
>>>> >
>>>> > RADV_PERFTEST=video_decode bin/cin
>>>> > ~/K38_sdcard1/Documents/iPhone11_4K-recorder_59.940HDR10.mov
>>>> >
>>>> > and got corruption as visible on screenshot  at the start of this
>>>> email
>>>> >
>>>> > Playing image forward cleans up  this corruption, but returning to
>>>> > timeline beginning bring it back.
>>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20250519/27c94e4d/attachment-0001.htm>


More information about the Cin mailing list