[Cin] Vulkan hevc hdr decode regression on ffmpeg master?
Phyllis Smith
phylsmith2017 at gmail.com
Tue May 20 21:15:02 CEST 2025
Downloaded a msmpeg4 file and unfortunately my computers are AMD / vdpau
hardware. The one vaapi laptop will not compile CinGG anymore. So the AMD
computers get the error::
> Decoder msmpeg4 does not support device type vaapi.
> HW device init failed, using SW decode.
> file:/root/Downloads/Fight.Club.Trailer.avi
> err: Operation not permitted
>
But I will still test decoding and encoding using software -- my rationale
is that if it decodes correctly, then the encode will match between ffmpeg
version 7.0 and future 8.0.
On Sun, May 18, 2025 at 6:21 PM Andrew Randrianasulu <
randrianasulu at gmail.com> wrote:
>
>
> пн, 19 мая 2025 г., 03:04 Phyllis Smith <phylsmith2017 at gmail.com>:
>
>> Thanks. I suspect patch8 was aimed at mpeg4 (old, ala xvid, not h265)
>>> playback via some hw accelerated method? I'll try some files I have from
>>> those old times ...
>>>
>> I loaded small h263 videos in ffmpeg 7.0 (current) which would run
>> h263dec.c (I assume) and then encoded them using h264.mp4 format. I then
>> did the same thing in the ffmpeg.git version (future version 8.0) where
>> patch8 was deleted. Visually detected no problem and when I used the
>> patchbay arithmetic subtract on the 2 versions of encoded files, they
>> showed no anomalies.
>>
>
> I am going by my understanding of context diff:
>
>
>
> --- a/libavcodec/h263dec.c
> +++ b/libavcodec/h263dec.c
> @@ -623,7 +623,7 @@
> if (CONFIG_MPEG4_DECODER && avctx->codec_id == AV_CODEC_ID_MPEG4)
> ff_mpeg4_frame_end(avctx, buf, buf_size);
>
> - if (!s->divx_packed && avctx->hwaccel)
> + if (s->divx_packed && avctx->hwaccel)
> ff_thread_finish_setup(avctx);
>
>
> yes, file named h263 but also serves (or served? if patch not applicable
> anymore) role in decoding
>
> DiVX type of codecs, old msmpeg4 was first of them, divx3/5/XVID followed
>
> So, *I think* you need to raid
>
> samples.mplayerhq.hu
>
> and get some "packed B frame" xvid (or may be just make one with
> Avidemux?) and then look if your vainfo/vdpauinfo shows MPEG4 decoding, set
> cingg to this decode accel, and play vid in both sw and hw decode mode ?
>
> Sorry still not moved myself to check it out .....
>
>
>
>
>
>> But I completely re-run make clean, ./autogen.sh/configure/make dance
>>>
>> Finally, it compiled but I am not sure what made the difference as I
>> always use "make clean" and then run "bld.sh" which includes "autogen.sh";
>> i.e. -
>>
>>> #!/bin/bash
>>> ...
>>> ( ./autogen.sh
>>> ./configure --with-single-user --with-git-ffmpeg=
>>> https://git.ffmpeg.org/ffmpeg.git
>>> make && make install ) 2>&1 | tee log
>>> mv Makefile Makefile.cfg
>>> cp Makefile.devel Makefile
>>>
>>
>>
>> On Sat, May 17, 2025 at 6:04 PM Andrew Randrianasulu <
>> randrianasulu at gmail.com> wrote:
>>
>>>
>>>
>>> вс, 18 мая 2025 г., 02:56 Phyllis Smith <phylsmith2017 at gmail.com>:
>>>
>>>> Checked into GIT the updated ffmpeg.git.patches for future potential
>>>> upgrade to ffmpeg version 8.0. And deleted ffmpeg.git.patch8 after
>>>> attempting to determine what it was actually for and could find no
>>>> information on that when included sometime in 2019 as patch7. It is
>>>> possible that it is no longer needed though - it may have been intended as
>>>> a speed improvement; but if some relevant error resurfaces, it can then be
>>>> revisited.
>>>>
>>>
>>>
>>> Thanks. I suspect patch8 was aimed at mpeg4 (old, ala xvid, not h265)
>>> playback via some hw accelerated method? I'll try some files I have from
>>> those old times ...
>>>
>>>
>>>
>>>> Andrea, the failure in your last attached cin5.log as shown below
>>>> appears to be due to commenting out libpostproc.a in configure.ac
>>>> because that is needed by cinelerra-5.1/mpeg2enc build.
>>>>
>>>>> make[2]: *** [Makefile:75: x86_64/hveg2enc] Error 1
>>>>> make[2]: uscita dalla directory
>>>>> «/home/paz/cinelerra5/cinelerra-5.1/mpeg2enc»
>>>>>
>>>>
>>>
>>> For me deleting libpostproc.a from configure.ac worked for compiling
>>> with ffmpeg.git
>>>
>>> But I completely re-run make clean, ./autogen.sh/configure/make dance
>>>
>>> not sure why it did not work for you ....
>>> make sure your user can rewrite global_config in the root of cinelerra's
>>> main src tree? (if you tried building from root and then from ordinary user)
>>>
>>>>
>>>>
>>>> On Wed, May 14, 2025 at 7:49 AM Andrew Randrianasulu <
>>>> randrianasulu at gmail.com> wrote:
>>>>
>>>>> On Wed, May 14, 2025 at 1:31 PM Andrew Randrianasulu
>>>>> <randrianasulu at gmail.com> wrote:
>>>>> >
>>>>> > So I was experimenting with Vulkan decoding in cinelerra-gg.
>>>>> >
>>>>> > After some fight I get build using ffmpeg git
>>>>> >
>>>>> > commit 038314bc6be2f35a82e9fba2228bcac2e4fee648 for ffmpeg
>>>>> >
>>>>> > here is bunch of errors like this:
>>>>> >
>>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 296
>>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 9
>>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 296
>>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 8
>>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 298
>>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 8
>>>>> > [hevc @ 0x6f789480] Could not find ref with POC 300
>>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 300
>>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 300
>>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 302
>>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f789480] Could not find ref with POC 304
>>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 304
>>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 304
>>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 306
>>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f789480] Could not find ref with POC 308
>>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 308
>>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 308
>>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 310
>>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f789480] Could not find ref with POC 312
>>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 312
>>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 312
>>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 314
>>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f789480] Could not find ref with POC 316
>>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 316
>>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 316
>>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 318
>>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f789480] Could not find ref with POC 320
>>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 320
>>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 320
>>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 322
>>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f789480] Could not find ref with POC 324
>>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 324
>>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 324
>>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 326
>>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f789480] Could not find ref with POC 328
>>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 328
>>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>>> > [hevc @ 0x6f72ad00] Could not find ref with POC 328
>>>>> > [hevc @ 0x6f72ad00] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f72ad00] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f77b3c0] Could not find ref with POC 330
>>>>> > [hevc @ 0x6f77b3c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f77b3c0] Skipping invalid undecodable NALU: 2
>>>>> > [hevc @ 0x6f789480] Could not find ref with POC 332
>>>>> > [hevc @ 0x6f789480] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f789480] Skipping invalid undecodable NALU: 1
>>>>> > [hevc @ 0x6f7465c0] Could not find ref with POC 332
>>>>> > [hevc @ 0x6f7465c0] Error constructing the frame RPS.
>>>>> > [hevc @ 0x6f7465c0] Skipping invalid undecodable NALU: 3
>>>>> >
>>>>> > file itself:
>>>>> >
>>>>> https://drive.google.com/file/d/1Ic9DZXMSo07EJMqCFaQRKSSrSw6y1mYv/view
>>>>> >
>>>>> > But I see some kind of first frame corruption I never saw on 7.0
>>>>> build
>>>>> >
>>>>> > https://paste.pics/860707666060d195485e07ea7b057ce8
>>>>> >
>>>>> > and speed kinda down from 58 fps to just 50-51 relative to ffmpeg
>>>>> libs 7.0?
>>>>> >
>>>>> > hw:
>>>>> > 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
>>>>> > [AMD/ATI] Lexa PRO [Radeon 540/540X/550/550X / RX 540X/550/550X] (rev
>>>>> > c7)
>>>>> >
>>>>> > mesa:
>>>>> >
>>>>> > OpenGL renderer string: AMD Radeon RX 550 / 550 Series (radeonsi,
>>>>> > polaris12, ACO, DRM 3.61, 6.12.26-x64)
>>>>> > OpenGL core profile version string: 4.6 (Core Profile) Mesa
>>>>> > 25.2.0-devel (git-ef63e3e4d2)
>>>>> >
>>>>> > cingg home git:
>>>>> > git://git.cinelerra-gg.org/goodguy/cinelerra.git
>>>>> >
>>>>> > I set two evn. variables specific to my system, but mostly I wanted
>>>>> to
>>>>> > get libplacebo and libzimg for HDR->SDR conversion
>>>>> >
>>>>> > EXTRA_LIBS := -lOpenCL -lSvtAv1Enc -lvpl -ldav1d -lxvidcore -lass
>>>>> > -lbluray -lsnappy -lzimg -lplacebo -lshaderc_shared -lnuma -lva
>>>>> > -lva-x11 `pkg-config --libs x11` -lva-drm -ldl
>>>>> > FFMPEG_EXTRA_CFG := --enable-libvpl --disable-doc --enable-opencl
>>>>> > --enable-libsvtav1 --enable-frei0r --enable-libdav1d --enable-libzimg
>>>>> > --enable-libxvid --enable-libass --enable-libbluray
>>>>> --enable-libsnappy
>>>>> > --enable-libshaderc --enable-libplacebo --enable-vulkan
>>>>> > --disable-debug --extra-cflags=-I/usr/local/include/vpl
>>>>> > --extra-cflags=-I/usr/include/svt-av1 --extra-ldflags=" -lva
>>>>> > `pkg-config --libs libva` -lva-x11 -lva-drm -ldl"
>>>>> >
>>>>> >
>>>>> > cingg configure:
>>>>> >
>>>>> > ./configure --with-git-ffmpeg=https://git.ffmpeg.org/ffmpeg.git
>>>>> > --with-single-user --enable-libsvtav1 --disable-dav1d
>>>>> >
>>>>> > I used bunch of patches (attached, done by Phyllis and me) and
>>>>> > manually removed posprocess.a ref. from our configure.ac for now
>>>>>
>>>>>
>>>>> One more patch/hack just for making building easier attached (on top
>>>>> of 0001-3 patches for cingg)
>>>>>
>>>>> ffmpeg.git patches go into thirdparty/src, and you probably want to
>>>>> move away ffmpeg.git.patch8 out of this directory so it will not fail
>>>>> patching
>>>>>
>>>>>
>>>>>
>>>>> >
>>>>> > there is still some problem with attaching ffmpeg filters
>>>>> > per-input-file, but main Vulkan decode problem still visible without
>>>>> > any filters
>>>>> >
>>>>> > I run just-compiled cin binary like this:
>>>>> >
>>>>> > RADV_PERFTEST=video_decode bin/cin
>>>>> > ~/K38_sdcard1/Documents/iPhone11_4K-recorder_59.940HDR10.mov
>>>>> >
>>>>> > and got corruption as visible on screenshot at the start of this
>>>>> email
>>>>> >
>>>>> > Playing image forward cleans up this corruption, but returning to
>>>>> > timeline beginning bring it back.
>>>>>
>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cinelerra-gg.org/pipermail/cin/attachments/20250520/c0072917/attachment-0001.htm>
More information about the Cin
mailing list