- Cin - Cinelerra-GG Mailing Lists

Slackware 14.2 64-bit works too
by Andrew Randrianasulu 12 Feb '19

12 Feb '19

..after installing python3 (latest Cin-GG uses it for somescript during build process). Default optimizations ("-O2, -fPIC") resulted in 22 fps playback with color3way effect enabled over 1280x720 (RGBA-8 color format in project - default) video. Upgrading optimizations to "-O3 -ffast-math -march=native -mtune=native -fPIC" resulted in 30 fps playback! Switching video output to OpenGL resulted in less fps. At most 64-bit Cin-GG can play two 1280x720 h264 MOV videos one on top of another, where one video with color3way effect and another - 50% transparent. 22 fps :} I'm still not sure if resulted Cin-GG compilation actually correct (mathematically-speaking). You can compile 'normal' and 'optimized' version and just swap some plugins, even one-by one and see if they still work correctly?

3 8

Update (was: Already half-working? (was: Re: MLRAW))
by Andrew Randrianasulu 12 Feb '19

12 Feb '19

hm, apparently green video was noticed while developing this format, there was sggestion it can be cause by wrong image temperature settings: ------------quote start--------- RenatoPhoto Moderators Hero Member *****Posts: 1509 5DM3 / 7D Re: Magic Lantern (RAW) Video format v2.0 (mlv_rec.mo) « Reply #1022 on: December 26, 2013, 10:46:52 PM » I compiled myself for 5D3 including a "make clean" and make for the new modules. For some reason my modules do not always get compiled when something new gets updated. Tested "as is" with the camera settings as have been saved by g3goo. Great results all audio is pretty well matched. I get better alignment if I move the audio forward by 1 frame. Changed setting to Preview=Hacked and also enabled Mrmory Hack, and card spanning ON. Tested with Card spanning ON at 1920x1080 at 29.97 fps and the audio matched again! Tested with Card spanning ON cropped video at 1920x1080 at 29.97 and had to slide audio forward by many frames and then to shrink the audio a bit. After that it matched. Tested with Card spanning ON 60 fps at 1600x560 the audio could not be synched by trimming or stretching or sliding, the audio was there but could not align. Tested with Card spanning ON Tested 50 fps at 1856x650 the audio could not be synched by trimming or stretching or sliding, the audio was there but could not align. For Post processing I always used MLVBrowseSharp and exported to DNG (with green cast) then I imported the dng and wav file to Vegas. Noticed that the green cast on dng is not due to BlackLevels. It appears that Color Temperature and Tint information is missing. As soon as I set in ACR Temperature to 5000 and tint to 0 the colors seem appropriate. ------------quote end---- src: https://www.magiclantern.fm/forum/index.php?topic=7122.1000 I also fished out link to specialized open-source player from this thread https://bitbucket.org/baldand/mlrawviewer/src/e7abaaf4cf9b?at=master "About MlRawViewer is a cross-platform viewer for raw video files produced by the Magic Lantern add-on software for Canon DSLR cameras. (See http://www.magiclantern.fm/ for more details). It supports both the original RAW format, and the newer MLV (RAW v2.0) format in both single and multi-file versions. It can also play CinemaDNG file sets." not tested it yet (python ..) https://thndl.com/how-dng-compresses-raw-data-with-lossless-jpeg92.html https://thndl.com/life-without-artifacts.html some more info for curious non-coders like me and hopefully also for GG. ---------- Пересланное сообщение ---------- Тема: Fwd: Already half-working? (was: Re: [Cin] MLRAW) Дата: Вторник 12 февраля 2019 Отправитель: Andrew Randrianasulu <randrianasulu(a)gmail.com> Получатель: "Cinelerra.GG" <cin(a)lists.cinelerra-gg.org> https://ibin.co/4WjDk0hiCa2W.png (Cinelerra-GG with ff_LUT3d filter loaded with file from Danne - https://drive.google.com/file/d/0B4tCJMlOYfiranRiRHhJMTA2Sjg/view?usp=shari…) but this way it of course slower ..much slower (32-bit Cin-GG, yet to test with 64-bit Cin-GG) ---------- Пересланное сообщение ---------- Тема: Fwd: Already half-working? (was: Re: [Cin] MLRAW) Дата: Вторник 12 февраля 2019 Отправитель: Andrew Randrianasulu <randrianasulu(a)gmail.com> Получатель: "Cinelerra.GG" <cin(a)lists.cinelerra-gg.org> upd: https://www.magiclantern.fm/forum/index.php?topic=18392.0 but I can't see images with LUT filter? ----------------- Re: FFmpeg-Play with MLV Raw Support « Reply #6 on: December 11, 2016, 06:39:27 PM » Here is a little quick test with a 3D correction lut created in DaVinci resolve. I just played with this manually, no math, could be much better. Command goes like this. 3D lut download https://drive.google.com/file/d/0B4tCJMlOYfiranRiRHhJMTA2Sjg/view?usp=shari… Code: [Select] FFplay -vf lut3d=drag/3d/lut/here your_file.MLV With 3D correction lut Without 3D corerction lut --------------- another link: https://lists.ffmpeg.org/pipermail/ffmpeg-user/2017-April/035749.html also, first email from 2014 thread: https://lists.ffmpeg.org/pipermail/ffmpeg-user/2014-June/022073.html ---quote---- I want to use open source tools in my workflow for raw video, that doesn't involve batch processing frame by frame colour grades for video... I think ffmpeg could do this... I can't be the first person who's been looking at this. Looking forward to any feedback you might offer. John P Santos Photographer // Owner GREENBEEMEDIA.COM ------------quote end------------ so, it requires some metadata extracting and .. auto-applying at least one ffmpeg filter? ---------- Пересланное сообщение ---------- Тема: Already half-working? (was: Re: [Cin] MLRAW) Дата: Вторник 12 февраля 2019 Отправитель: Andrew Randrianasulu <randrianasulu(a)gmail.com> Получатель: "Cinelerra.GG" <cin(a)lists.cinelerra-gg.org> Actually, Cin-GG already can open some of those files. But colors are strange .... https://ibin.co/4Wiz8GXfP0Yz.png ffplay says: ffplay M13-0957.MLV ffplay version 2.8.11 Copyright (c) 2003-2017 the FFmpeg developers built with gcc 4.8.5 (GCC) configuration: --arch=i486 --target-os=linux --prefix=/usr --libdir=/usr/lib --mandir=/usr/man --docdir=/usr/doc/ffmpeg-2.8.11 --enable-gpl --enable-version3 --disable-static --enable-shared --enable-runtime-cpudetect --enable-ffmpeg --enable-ffplay --enable-ffprobe --enable-ffserver --enable-doc --enable-avdevice --enable-avcodec --enable-avformat --enable-avutil --enable-swresample --enable-swscale --enable-postproc --enable-avfilter --enable-avresample --enable-pthreads --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-ladspa --enable-libass --enable-libbluray --disable-libbs2b --disable-libcaca --disable-libcelt --enable-libcdio --disable-libdc1394 --disable-libflite --enable-libfreetype --enable-libfribidi --disable-libgme --enable-libgsm --enable-libiec61883 --disable-libilbc --disable-libkvazaar --disable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --disable-libpulse --disable-libquvi --enable-librtmp --enable-libschroedinger --enable-libsmbclient --enable-libsnappy --disable-libsoxr --enable-libspeex --disable-libssh --enable-libtheora --enable-libtwolame --enable-libv4l2 --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxcb --enable-libxvid --enable-libzvbi --enable-lzma --enable-openal --enable-opengl --enable-sdl --enable-x11grab --enable-zlib --disable-debug libavutil 54. 31.100 / 54. 31.100 libavcodec 56. 60.100 / 56. 60.100 libavformat 56. 40.101 / 56. 40.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 40.101 / 5. 40.101 libavresample 2. 1. 0 / 2. 1. 0 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 2.101 / 1. 2.101 libpostproc 53. 3.100 / 53. 3.100 [mlv @ 0xf1f004a0] scanning M13-0957.M00q= 0KB sq= 0B f=0/0 Input #0, mlv, from 'M13-0957.MLV': Metadata: guid : 0x7cb005420800a612 info : text: My son; take: 1; shutterValue : 30000 focalLength : 50 focalDist : 138 aperture : 0 stabilizerMode : 14 autofocusMode : 0 flags : 0 lensID : 0 lensName : 28-300mm wb_mode : 0 kelvin : 5700 wbgain_r : 491 wbgain_g : 1024 wbgain_b : 1024 cameraName : Failed to get properties. cameraModel : 0 wbs_gm : 0 time : 2013-08-13 09:57:10 isoMode : auto isoValue : 250 isoAnalog : 0 digitalGain : 0 wbs_ba : 0 Duration: 00:00:07.68, start: 0.000000, bitrate: 699691 kb/s Stream #0:0: Video: rawvideo (BIT[16] / 0x10544942), bayer_rggb16le, 1920x1288, 25 tbr, 25 tbn, 25 tbc 9.51 M-V: 0.000 fd= 103 aq= 0KB vq= 0KB sq= 0B f=0/0 ------------------- I found similar output via google, back in time it was not working corretcly https://lists.ffmpeg.org/pipermail/ffmpeg-user/2014-June/022112.html But then stream with audio fails to sound properly (in Cin-GG): ----------- ffplay M22-0126.MLV ffplay version 2.8.11 Copyright (c) 2003-2017 the FFmpeg developers built with gcc 4.8.5 (GCC) configuration: --arch=i486 --target-os=linux --prefix=/usr --libdir=/usr/lib --mandir=/usr/man --docdir=/usr/doc/ffmpeg-2.8.11 --enable-gpl --enable-version3 --disable-static --enable-shared --enable-runtime-cpudetect --enable-ffmpeg --enable-ffplay --enable-ffprobe --enable-ffserver --enable-doc --enable-avdevice --enable-avcodec --enable-avformat --enable-avutil --enable-swresample --enable-swscale --enable-postproc --enable-avfilter --enable-avresample --enable-pthreads --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-ladspa --enable-libass --enable-libbluray --disable-libbs2b --disable-libcaca --disable-libcelt --enable-libcdio --disable-libdc1394 --disable-libflite --enable-libfreetype --enable-libfribidi --disable-libgme --enable-libgsm --enable-libiec61883 --disable-libilbc --disable-libkvazaar --disable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --disable-libpulse --disable-libquvi --enable-librtmp --enable-libschroedinger --enable-libsmbclient --enable-libsnappy --disable-libsoxr --enable-libspeex --disable-libssh --enable-libtheora --enable-libtwolame --enable-libv4l2 --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxcb --enable-libxvid --enable-libzvbi --enable-lzma --enable-openal --enable-opengl --enable-sdl --enable-x11grab --enable-zlib --disable-debug libavutil 54. 31.100 / 54. 31.100 libavcodec 56. 60.100 / 56. 60.100 libavformat 56. 40.101 / 56. 40.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 40.101 / 5. 40.101 libavresample 2. 1. 0 / 2. 1. 0 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 2.101 / 1. 2.101 libpostproc 53. 3.100 / 53. 3.100 Ignoring attempt to set invalid timebase 1/0 for st:1 0B f=0/0 Input #0, mlv, from 'M22-0126.MLV': Metadata: guid : 0x996039816d1694c2 picStyleName : Auto lensName : EF50mm f/1.8 II digitalGain : 0 isoMode : auto isoValue : 220 isoAnalog : 0 shutterValue : 29994 focalLength : 50 focalDist : 0 aperture : 180 stabilizerMode : 0 autofocusMode : 3 flags : 0 lensID : 29 cameraName : Canon EOS 5D Mark III cameraModel : 2147484293 cameraSerial : 110091F150 wb_mode : 0 kelvin : 6500 wbgain_r : 128 wbgain_g : 1024 wbgain_b : 1024 wbs_gm : 0 wbs_ba : 0 picStyleId : 135 contrast : 0 sharpness : 3 saturation : 0 colortone : 0 time : 2013-12-22 01:26:18 Duration: 00:00:05.67, start: 0.000000, bitrate: 452809 kb/s Stream #0:0: Video: rawvideo (BIT[16] / 0x10544942), bayer_rggb16le, 1536x864, 23.98 tbr, 23.98 tbn, 23.98 tbc Stream #0:1: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 44100 Hz, 2 channels, s16, 1411 kb/s Seek to 54% ( 0:00:02) of total duration ( 0:00:05) B f=0/0 ALSA lib pcm.c:8424:(snd_pcm_recover) underrun occurred 0B f=0/0 also, image dimensions not autodetected properly .... (I just loaded file via Open dialog) ---------- Пересланное сообщение ---------- Тема: Re: [Cin] MLRAW Дата: Вторник 12 февраля 2019 Отправитель: Andrew Randrianasulu <randrianasulu(a)gmail.com> Получатель: "Cinelerra.GG" <cin(a)lists.cinelerra-gg.org> В сообщении от Sunday 10 February 2019 22:28:55 Andrea paz написал(а): > Hi Andrew, Thank you for the news. Can I put the link back on the > forum? It could also be of interest to occasional visitors. upd: while reading forum found link to test files, they are still there, I hope (watched preview for already converted into avi 5 sec clip) https://drive.google.com/drive/folders/0BwQ2MOkAZTFHb3lmaTMzUV9uMWc ------------------------------------------------------- ------------------------------------------------------- ------------------------------------------------------- -------------------------------------------------------

1 0

Re: [Cin] Slackware 14.2 64-bit works too
by Benrob0329 12 Feb '19

12 Feb '19

From what I've been told x11-opengl will actually be slower than x11 because of some render path optimizations that Cinelerra has. Might be worth adding to your tests.On Feb 12, 2019 8:25 AM, Andrea paz <gamberucci.andrea(a)gmail.com> wrote: > > I did some quick tests: > CFLAGS std --> -02 TIMEcompile= about 20 min > Playback --> unchecked "play every frame"; X11-OpenGL > > Only edit --> framerate achivied = 30 > edit + effects --> = 07 > > Renderig of 20 sec of mp4 video. Preset hd.youtube = 1 min 59 sec > > > CFLAGS new --> -03 -ffast-math TIMEcompile= about 20 min (the same!) > Playback --> unchecked "play every frame"; X11-OpenGL > > Only edit --> framerate achivied = 30 > edit + effects --> = 13 > > Renderig of 20 sec of mp4 video. Preset hd.youtube = 1 min 59 sec (the same!) > -- > Cin mailing list > Cin(a)lists.cinelerra-gg.org > https://lists.cinelerra-gg.org/mailman/listinfo/cin

1 0

MKV containers
by Andrea paz 12 Feb '19

12 Feb '19

I read in QuickStart.pdf that the mkv format is not perfectly compatible with CinGG. As a further contribution I can say that every time I use mkv format (with any codec) it always comes out in the terminal the string: "FFMPEG::open_decoder: some stream times estimated: /home/paz/video_editing/prova/MyVideo.mkv" In these cases the file management, both in playback and rendering, is much heavier. For example, a rendering of two mkv files (x264) of about 1 Gb in total takes more than an hour, while similar mp4 files (x264) take 25 minutes. Is there anything I can do about it? I would love to be able to use containers and codecs associated with mkv. Have others had similar experiences?

5 37

Fwd: Already half-working? (was: Re: MLRAW)
by Andrew Randrianasulu 12 Feb '19

12 Feb '19

https://ibin.co/4WjDk0hiCa2W.png (Cinelerra-GG with ff_LUT3d filter loaded with file from Danne - https://drive.google.com/file/d/0B4tCJMlOYfiranRiRHhJMTA2Sjg/view?usp=shari…) but this way it of course slower ..much slower (32-bit Cin-GG, yet to test with 64-bit Cin-GG) ---------- Пересланное сообщение ---------- Тема: Fwd: Already half-working? (was: Re: [Cin] MLRAW) Дата: Вторник 12 февраля 2019 Отправитель: Andrew Randrianasulu <randrianasulu(a)gmail.com> Получатель: "Cinelerra.GG" <cin(a)lists.cinelerra-gg.org> upd: https://www.magiclantern.fm/forum/index.php?topic=18392.0 but I can't see images with LUT filter? ----------------- Re: FFmpeg-Play with MLV Raw Support « Reply #6 on: December 11, 2016, 06:39:27 PM » Here is a little quick test with a 3D correction lut created in DaVinci resolve. I just played with this manually, no math, could be much better. Command goes like this. 3D lut download https://drive.google.com/file/d/0B4tCJMlOYfiranRiRHhJMTA2Sjg/view?usp=shari… Code: [Select] FFplay -vf lut3d=drag/3d/lut/here your_file.MLV With 3D correction lut Without 3D corerction lut --------------- another link: https://lists.ffmpeg.org/pipermail/ffmpeg-user/2017-April/035749.html also, first email from 2014 thread: https://lists.ffmpeg.org/pipermail/ffmpeg-user/2014-June/022073.html ---quote---- I want to use open source tools in my workflow for raw video, that doesn't involve batch processing frame by frame colour grades for video... I think ffmpeg could do this... I can't be the first person who's been looking at this. Looking forward to any feedback you might offer. John P Santos Photographer // Owner GREENBEEMEDIA.COM ------------quote end------------ so, it requires some metadata extracting and .. auto-applying at least one ffmpeg filter? ---------- Пересланное сообщение ---------- Тема: Already half-working? (was: Re: [Cin] MLRAW) Дата: Вторник 12 февраля 2019 Отправитель: Andrew Randrianasulu <randrianasulu(a)gmail.com> Получатель: "Cinelerra.GG" <cin(a)lists.cinelerra-gg.org> Actually, Cin-GG already can open some of those files. But colors are strange .... https://ibin.co/4Wiz8GXfP0Yz.png ffplay says: ffplay M13-0957.MLV ffplay version 2.8.11 Copyright (c) 2003-2017 the FFmpeg developers built with gcc 4.8.5 (GCC) configuration: --arch=i486 --target-os=linux --prefix=/usr --libdir=/usr/lib --mandir=/usr/man --docdir=/usr/doc/ffmpeg-2.8.11 --enable-gpl --enable-version3 --disable-static --enable-shared --enable-runtime-cpudetect --enable-ffmpeg --enable-ffplay --enable-ffprobe --enable-ffserver --enable-doc --enable-avdevice --enable-avcodec --enable-avformat --enable-avutil --enable-swresample --enable-swscale --enable-postproc --enable-avfilter --enable-avresample --enable-pthreads --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-ladspa --enable-libass --enable-libbluray --disable-libbs2b --disable-libcaca --disable-libcelt --enable-libcdio --disable-libdc1394 --disable-libflite --enable-libfreetype --enable-libfribidi --disable-libgme --enable-libgsm --enable-libiec61883 --disable-libilbc --disable-libkvazaar --disable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --disable-libpulse --disable-libquvi --enable-librtmp --enable-libschroedinger --enable-libsmbclient --enable-libsnappy --disable-libsoxr --enable-libspeex --disable-libssh --enable-libtheora --enable-libtwolame --enable-libv4l2 --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxcb --enable-libxvid --enable-libzvbi --enable-lzma --enable-openal --enable-opengl --enable-sdl --enable-x11grab --enable-zlib --disable-debug libavutil 54. 31.100 / 54. 31.100 libavcodec 56. 60.100 / 56. 60.100 libavformat 56. 40.101 / 56. 40.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 40.101 / 5. 40.101 libavresample 2. 1. 0 / 2. 1. 0 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 2.101 / 1. 2.101 libpostproc 53. 3.100 / 53. 3.100 [mlv @ 0xf1f004a0] scanning M13-0957.M00q= 0KB sq= 0B f=0/0 Input #0, mlv, from 'M13-0957.MLV': Metadata: guid : 0x7cb005420800a612 info : text: My son; take: 1; shutterValue : 30000 focalLength : 50 focalDist : 138 aperture : 0 stabilizerMode : 14 autofocusMode : 0 flags : 0 lensID : 0 lensName : 28-300mm wb_mode : 0 kelvin : 5700 wbgain_r : 491 wbgain_g : 1024 wbgain_b : 1024 cameraName : Failed to get properties. cameraModel : 0 wbs_gm : 0 time : 2013-08-13 09:57:10 isoMode : auto isoValue : 250 isoAnalog : 0 digitalGain : 0 wbs_ba : 0 Duration: 00:00:07.68, start: 0.000000, bitrate: 699691 kb/s Stream #0:0: Video: rawvideo (BIT[16] / 0x10544942), bayer_rggb16le, 1920x1288, 25 tbr, 25 tbn, 25 tbc 9.51 M-V: 0.000 fd= 103 aq= 0KB vq= 0KB sq= 0B f=0/0 ------------------- I found similar output via google, back in time it was not working corretcly https://lists.ffmpeg.org/pipermail/ffmpeg-user/2014-June/022112.html But then stream with audio fails to sound properly (in Cin-GG): ----------- ffplay M22-0126.MLV ffplay version 2.8.11 Copyright (c) 2003-2017 the FFmpeg developers built with gcc 4.8.5 (GCC) configuration: --arch=i486 --target-os=linux --prefix=/usr --libdir=/usr/lib --mandir=/usr/man --docdir=/usr/doc/ffmpeg-2.8.11 --enable-gpl --enable-version3 --disable-static --enable-shared --enable-runtime-cpudetect --enable-ffmpeg --enable-ffplay --enable-ffprobe --enable-ffserver --enable-doc --enable-avdevice --enable-avcodec --enable-avformat --enable-avutil --enable-swresample --enable-swscale --enable-postproc --enable-avfilter --enable-avresample --enable-pthreads --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-ladspa --enable-libass --enable-libbluray --disable-libbs2b --disable-libcaca --disable-libcelt --enable-libcdio --disable-libdc1394 --disable-libflite --enable-libfreetype --enable-libfribidi --disable-libgme --enable-libgsm --enable-libiec61883 --disable-libilbc --disable-libkvazaar --disable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --disable-libpulse --disable-libquvi --enable-librtmp --enable-libschroedinger --enable-libsmbclient --enable-libsnappy --disable-libsoxr --enable-libspeex --disable-libssh --enable-libtheora --enable-libtwolame --enable-libv4l2 --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxcb --enable-libxvid --enable-libzvbi --enable-lzma --enable-openal --enable-opengl --enable-sdl --enable-x11grab --enable-zlib --disable-debug libavutil 54. 31.100 / 54. 31.100 libavcodec 56. 60.100 / 56. 60.100 libavformat 56. 40.101 / 56. 40.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 40.101 / 5. 40.101 libavresample 2. 1. 0 / 2. 1. 0 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 2.101 / 1. 2.101 libpostproc 53. 3.100 / 53. 3.100 Ignoring attempt to set invalid timebase 1/0 for st:1 0B f=0/0 Input #0, mlv, from 'M22-0126.MLV': Metadata: guid : 0x996039816d1694c2 picStyleName : Auto lensName : EF50mm f/1.8 II digitalGain : 0 isoMode : auto isoValue : 220 isoAnalog : 0 shutterValue : 29994 focalLength : 50 focalDist : 0 aperture : 180 stabilizerMode : 0 autofocusMode : 3 flags : 0 lensID : 29 cameraName : Canon EOS 5D Mark III cameraModel : 2147484293 cameraSerial : 110091F150 wb_mode : 0 kelvin : 6500 wbgain_r : 128 wbgain_g : 1024 wbgain_b : 1024 wbs_gm : 0 wbs_ba : 0 picStyleId : 135 contrast : 0 sharpness : 3 saturation : 0 colortone : 0 time : 2013-12-22 01:26:18 Duration: 00:00:05.67, start: 0.000000, bitrate: 452809 kb/s Stream #0:0: Video: rawvideo (BIT[16] / 0x10544942), bayer_rggb16le, 1536x864, 23.98 tbr, 23.98 tbn, 23.98 tbc Stream #0:1: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 44100 Hz, 2 channels, s16, 1411 kb/s Seek to 54% ( 0:00:02) of total duration ( 0:00:05) B f=0/0 ALSA lib pcm.c:8424:(snd_pcm_recover) underrun occurred 0B f=0/0 also, image dimensions not autodetected properly .... (I just loaded file via Open dialog) ---------- Пересланное сообщение ---------- Тема: Re: [Cin] MLRAW Дата: Вторник 12 февраля 2019 Отправитель: Andrew Randrianasulu <randrianasulu(a)gmail.com> Получатель: "Cinelerra.GG" <cin(a)lists.cinelerra-gg.org> В сообщении от Sunday 10 February 2019 22:28:55 Andrea paz написал(а): > Hi Andrew, Thank you for the news. Can I put the link back on the > forum? It could also be of interest to occasional visitors. upd: while reading forum found link to test files, they are still there, I hope (watched preview for already converted into avi 5 sec clip) https://drive.google.com/drive/folders/0BwQ2MOkAZTFHb3lmaTMzUV9uMWc ------------------------------------------------------- ------------------------------------------------------- -------------------------------------------------------

1 0

Fwd: Already half-working? (was: Re: MLRAW)
by Andrew Randrianasulu 12 Feb '19

12 Feb '19

upd: https://www.magiclantern.fm/forum/index.php?topic=18392.0 but I can't see images with LUT filter? ----------------- Re: FFmpeg-Play with MLV Raw Support « Reply #6 on: December 11, 2016, 06:39:27 PM » Here is a little quick test with a 3D correction lut created in DaVinci resolve. I just played with this manually, no math, could be much better. Command goes like this. 3D lut download https://drive.google.com/file/d/0B4tCJMlOYfiranRiRHhJMTA2Sjg/view?usp=shari… Code: [Select] FFplay -vf lut3d=drag/3d/lut/here your_file.MLV With 3D correction lut Without 3D corerction lut --------------- another link: https://lists.ffmpeg.org/pipermail/ffmpeg-user/2017-April/035749.html also, first email from 2014 thread: https://lists.ffmpeg.org/pipermail/ffmpeg-user/2014-June/022073.html ---quote---- I want to use open source tools in my workflow for raw video, that doesn't involve batch processing frame by frame colour grades for video... I think ffmpeg could do this... I can't be the first person who's been looking at this. Looking forward to any feedback you might offer. John P Santos Photographer // Owner GREENBEEMEDIA.COM ------------quote end------------ so, it requires some metadata extracting and .. auto-applying at least one ffmpeg filter? ---------- Пересланное сообщение ---------- Тема: Already half-working? (was: Re: [Cin] MLRAW) Дата: Вторник 12 февраля 2019 Отправитель: Andrew Randrianasulu <randrianasulu(a)gmail.com> Получатель: "Cinelerra.GG" <cin(a)lists.cinelerra-gg.org> Actually, Cin-GG already can open some of those files. But colors are strange .... https://ibin.co/4Wiz8GXfP0Yz.png ffplay says: ffplay M13-0957.MLV ffplay version 2.8.11 Copyright (c) 2003-2017 the FFmpeg developers built with gcc 4.8.5 (GCC) configuration: --arch=i486 --target-os=linux --prefix=/usr --libdir=/usr/lib --mandir=/usr/man --docdir=/usr/doc/ffmpeg-2.8.11 --enable-gpl --enable-version3 --disable-static --enable-shared --enable-runtime-cpudetect --enable-ffmpeg --enable-ffplay --enable-ffprobe --enable-ffserver --enable-doc --enable-avdevice --enable-avcodec --enable-avformat --enable-avutil --enable-swresample --enable-swscale --enable-postproc --enable-avfilter --enable-avresample --enable-pthreads --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-ladspa --enable-libass --enable-libbluray --disable-libbs2b --disable-libcaca --disable-libcelt --enable-libcdio --disable-libdc1394 --disable-libflite --enable-libfreetype --enable-libfribidi --disable-libgme --enable-libgsm --enable-libiec61883 --disable-libilbc --disable-libkvazaar --disable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --disable-libpulse --disable-libquvi --enable-librtmp --enable-libschroedinger --enable-libsmbclient --enable-libsnappy --disable-libsoxr --enable-libspeex --disable-libssh --enable-libtheora --enable-libtwolame --enable-libv4l2 --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxcb --enable-libxvid --enable-libzvbi --enable-lzma --enable-openal --enable-opengl --enable-sdl --enable-x11grab --enable-zlib --disable-debug libavutil 54. 31.100 / 54. 31.100 libavcodec 56. 60.100 / 56. 60.100 libavformat 56. 40.101 / 56. 40.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 40.101 / 5. 40.101 libavresample 2. 1. 0 / 2. 1. 0 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 2.101 / 1. 2.101 libpostproc 53. 3.100 / 53. 3.100 [mlv @ 0xf1f004a0] scanning M13-0957.M00q= 0KB sq= 0B f=0/0 Input #0, mlv, from 'M13-0957.MLV': Metadata: guid : 0x7cb005420800a612 info : text: My son; take: 1; shutterValue : 30000 focalLength : 50 focalDist : 138 aperture : 0 stabilizerMode : 14 autofocusMode : 0 flags : 0 lensID : 0 lensName : 28-300mm wb_mode : 0 kelvin : 5700 wbgain_r : 491 wbgain_g : 1024 wbgain_b : 1024 cameraName : Failed to get properties. cameraModel : 0 wbs_gm : 0 time : 2013-08-13 09:57:10 isoMode : auto isoValue : 250 isoAnalog : 0 digitalGain : 0 wbs_ba : 0 Duration: 00:00:07.68, start: 0.000000, bitrate: 699691 kb/s Stream #0:0: Video: rawvideo (BIT[16] / 0x10544942), bayer_rggb16le, 1920x1288, 25 tbr, 25 tbn, 25 tbc 9.51 M-V: 0.000 fd= 103 aq= 0KB vq= 0KB sq= 0B f=0/0 ------------------- I found similar output via google, back in time it was not working corretcly https://lists.ffmpeg.org/pipermail/ffmpeg-user/2014-June/022112.html But then stream with audio fails to sound properly (in Cin-GG): ----------- ffplay M22-0126.MLV ffplay version 2.8.11 Copyright (c) 2003-2017 the FFmpeg developers built with gcc 4.8.5 (GCC) configuration: --arch=i486 --target-os=linux --prefix=/usr --libdir=/usr/lib --mandir=/usr/man --docdir=/usr/doc/ffmpeg-2.8.11 --enable-gpl --enable-version3 --disable-static --enable-shared --enable-runtime-cpudetect --enable-ffmpeg --enable-ffplay --enable-ffprobe --enable-ffserver --enable-doc --enable-avdevice --enable-avcodec --enable-avformat --enable-avutil --enable-swresample --enable-swscale --enable-postproc --enable-avfilter --enable-avresample --enable-pthreads --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-ladspa --enable-libass --enable-libbluray --disable-libbs2b --disable-libcaca --disable-libcelt --enable-libcdio --disable-libdc1394 --disable-libflite --enable-libfreetype --enable-libfribidi --disable-libgme --enable-libgsm --enable-libiec61883 --disable-libilbc --disable-libkvazaar --disable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --disable-libpulse --disable-libquvi --enable-librtmp --enable-libschroedinger --enable-libsmbclient --enable-libsnappy --disable-libsoxr --enable-libspeex --disable-libssh --enable-libtheora --enable-libtwolame --enable-libv4l2 --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxcb --enable-libxvid --enable-libzvbi --enable-lzma --enable-openal --enable-opengl --enable-sdl --enable-x11grab --enable-zlib --disable-debug libavutil 54. 31.100 / 54. 31.100 libavcodec 56. 60.100 / 56. 60.100 libavformat 56. 40.101 / 56. 40.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 40.101 / 5. 40.101 libavresample 2. 1. 0 / 2. 1. 0 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 2.101 / 1. 2.101 libpostproc 53. 3.100 / 53. 3.100 Ignoring attempt to set invalid timebase 1/0 for st:1 0B f=0/0 Input #0, mlv, from 'M22-0126.MLV': Metadata: guid : 0x996039816d1694c2 picStyleName : Auto lensName : EF50mm f/1.8 II digitalGain : 0 isoMode : auto isoValue : 220 isoAnalog : 0 shutterValue : 29994 focalLength : 50 focalDist : 0 aperture : 180 stabilizerMode : 0 autofocusMode : 3 flags : 0 lensID : 29 cameraName : Canon EOS 5D Mark III cameraModel : 2147484293 cameraSerial : 110091F150 wb_mode : 0 kelvin : 6500 wbgain_r : 128 wbgain_g : 1024 wbgain_b : 1024 wbs_gm : 0 wbs_ba : 0 picStyleId : 135 contrast : 0 sharpness : 3 saturation : 0 colortone : 0 time : 2013-12-22 01:26:18 Duration: 00:00:05.67, start: 0.000000, bitrate: 452809 kb/s Stream #0:0: Video: rawvideo (BIT[16] / 0x10544942), bayer_rggb16le, 1536x864, 23.98 tbr, 23.98 tbn, 23.98 tbc Stream #0:1: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 44100 Hz, 2 channels, s16, 1411 kb/s Seek to 54% ( 0:00:02) of total duration ( 0:00:05) B f=0/0 ALSA lib pcm.c:8424:(snd_pcm_recover) underrun occurred 0B f=0/0 also, image dimensions not autodetected properly .... (I just loaded file via Open dialog) ---------- Пересланное сообщение ---------- Тема: Re: [Cin] MLRAW Дата: Вторник 12 февраля 2019 Отправитель: Andrew Randrianasulu <randrianasulu(a)gmail.com> Получатель: "Cinelerra.GG" <cin(a)lists.cinelerra-gg.org> В сообщении от Sunday 10 February 2019 22:28:55 Andrea paz написал(а): > Hi Andrew, Thank you for the news. Can I put the link back on the > forum? It could also be of interest to occasional visitors. upd: while reading forum found link to test files, they are still there, I hope (watched preview for already converted into avi 5 sec clip) https://drive.google.com/drive/folders/0BwQ2MOkAZTFHb3lmaTMzUV9uMWc ------------------------------------------------------- -------------------------------------------------------

1 0

Already half-working? (was: Re: MLRAW)
by Andrew Randrianasulu 12 Feb '19

12 Feb '19

Actually, Cin-GG already can open some of those files. But colors are strange .... https://ibin.co/4Wiz8GXfP0Yz.png ffplay says: ffplay M13-0957.MLV ffplay version 2.8.11 Copyright (c) 2003-2017 the FFmpeg developers built with gcc 4.8.5 (GCC) configuration: --arch=i486 --target-os=linux --prefix=/usr --libdir=/usr/lib --mandir=/usr/man --docdir=/usr/doc/ffmpeg-2.8.11 --enable-gpl --enable-version3 --disable-static --enable-shared --enable-runtime-cpudetect --enable-ffmpeg --enable-ffplay --enable-ffprobe --enable-ffserver --enable-doc --enable-avdevice --enable-avcodec --enable-avformat --enable-avutil --enable-swresample --enable-swscale --enable-postproc --enable-avfilter --enable-avresample --enable-pthreads --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-ladspa --enable-libass --enable-libbluray --disable-libbs2b --disable-libcaca --disable-libcelt --enable-libcdio --disable-libdc1394 --disable-libflite --enable-libfreetype --enable-libfribidi --disable-libgme --enable-libgsm --enable-libiec61883 --disable-libilbc --disable-libkvazaar --disable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --disable-libpulse --disable-libquvi --enable-librtmp --enable-libschroedinger --enable-libsmbclient --enable-libsnappy --disable-libsoxr --enable-libspeex --disable-libssh --enable-libtheora --enable-libtwolame --enable-libv4l2 --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxcb --enable-libxvid --enable-libzvbi --enable-lzma --enable-openal --enable-opengl --enable-sdl --enable-x11grab --enable-zlib --disable-debug libavutil 54. 31.100 / 54. 31.100 libavcodec 56. 60.100 / 56. 60.100 libavformat 56. 40.101 / 56. 40.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 40.101 / 5. 40.101 libavresample 2. 1. 0 / 2. 1. 0 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 2.101 / 1. 2.101 libpostproc 53. 3.100 / 53. 3.100 [mlv @ 0xf1f004a0] scanning M13-0957.M00q= 0KB sq= 0B f=0/0 Input #0, mlv, from 'M13-0957.MLV': Metadata: guid : 0x7cb005420800a612 info : text: My son; take: 1; shutterValue : 30000 focalLength : 50 focalDist : 138 aperture : 0 stabilizerMode : 14 autofocusMode : 0 flags : 0 lensID : 0 lensName : 28-300mm wb_mode : 0 kelvin : 5700 wbgain_r : 491 wbgain_g : 1024 wbgain_b : 1024 cameraName : Failed to get properties. cameraModel : 0 wbs_gm : 0 time : 2013-08-13 09:57:10 isoMode : auto isoValue : 250 isoAnalog : 0 digitalGain : 0 wbs_ba : 0 Duration: 00:00:07.68, start: 0.000000, bitrate: 699691 kb/s Stream #0:0: Video: rawvideo (BIT[16] / 0x10544942), bayer_rggb16le, 1920x1288, 25 tbr, 25 tbn, 25 tbc 9.51 M-V: 0.000 fd= 103 aq= 0KB vq= 0KB sq= 0B f=0/0 ------------------- I found similar output via google, back in time it was not working corretcly https://lists.ffmpeg.org/pipermail/ffmpeg-user/2014-June/022112.html But then stream with audio fails to sound properly (in Cin-GG): ----------- ffplay M22-0126.MLV ffplay version 2.8.11 Copyright (c) 2003-2017 the FFmpeg developers built with gcc 4.8.5 (GCC) configuration: --arch=i486 --target-os=linux --prefix=/usr --libdir=/usr/lib --mandir=/usr/man --docdir=/usr/doc/ffmpeg-2.8.11 --enable-gpl --enable-version3 --disable-static --enable-shared --enable-runtime-cpudetect --enable-ffmpeg --enable-ffplay --enable-ffprobe --enable-ffserver --enable-doc --enable-avdevice --enable-avcodec --enable-avformat --enable-avutil --enable-swresample --enable-swscale --enable-postproc --enable-avfilter --enable-avresample --enable-pthreads --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-ladspa --enable-libass --enable-libbluray --disable-libbs2b --disable-libcaca --disable-libcelt --enable-libcdio --disable-libdc1394 --disable-libflite --enable-libfreetype --enable-libfribidi --disable-libgme --enable-libgsm --enable-libiec61883 --disable-libilbc --disable-libkvazaar --disable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --disable-libpulse --disable-libquvi --enable-librtmp --enable-libschroedinger --enable-libsmbclient --enable-libsnappy --disable-libsoxr --enable-libspeex --disable-libssh --enable-libtheora --enable-libtwolame --enable-libv4l2 --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxcb --enable-libxvid --enable-libzvbi --enable-lzma --enable-openal --enable-opengl --enable-sdl --enable-x11grab --enable-zlib --disable-debug libavutil 54. 31.100 / 54. 31.100 libavcodec 56. 60.100 / 56. 60.100 libavformat 56. 40.101 / 56. 40.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 40.101 / 5. 40.101 libavresample 2. 1. 0 / 2. 1. 0 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 2.101 / 1. 2.101 libpostproc 53. 3.100 / 53. 3.100 Ignoring attempt to set invalid timebase 1/0 for st:1 0B f=0/0 Input #0, mlv, from 'M22-0126.MLV': Metadata: guid : 0x996039816d1694c2 picStyleName : Auto lensName : EF50mm f/1.8 II digitalGain : 0 isoMode : auto isoValue : 220 isoAnalog : 0 shutterValue : 29994 focalLength : 50 focalDist : 0 aperture : 180 stabilizerMode : 0 autofocusMode : 3 flags : 0 lensID : 29 cameraName : Canon EOS 5D Mark III cameraModel : 2147484293 cameraSerial : 110091F150 wb_mode : 0 kelvin : 6500 wbgain_r : 128 wbgain_g : 1024 wbgain_b : 1024 wbs_gm : 0 wbs_ba : 0 picStyleId : 135 contrast : 0 sharpness : 3 saturation : 0 colortone : 0 time : 2013-12-22 01:26:18 Duration: 00:00:05.67, start: 0.000000, bitrate: 452809 kb/s Stream #0:0: Video: rawvideo (BIT[16] / 0x10544942), bayer_rggb16le, 1536x864, 23.98 tbr, 23.98 tbn, 23.98 tbc Stream #0:1: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 44100 Hz, 2 channels, s16, 1411 kb/s Seek to 54% ( 0:00:02) of total duration ( 0:00:05) B f=0/0 ALSA lib pcm.c:8424:(snd_pcm_recover) underrun occurred 0B f=0/0 also, image dimensions not autodetected properly .... (I just loaded file via Open dialog) ---------- Пересланное сообщение ---------- Тема: Re: [Cin] MLRAW Дата: Вторник 12 февраля 2019 Отправитель: Andrew Randrianasulu <randrianasulu(a)gmail.com> Получатель: "Cinelerra.GG" <cin(a)lists.cinelerra-gg.org> В сообщении от Sunday 10 February 2019 22:28:55 Andrea paz написал(а): > Hi Andrew, Thank you for the news. Can I put the link back on the > forum? It could also be of interest to occasional visitors. upd: while reading forum found link to test files, they are still there, I hope (watched preview for already converted into avi 5 sec clip) https://drive.google.com/drive/folders/0BwQ2MOkAZTFHb3lmaTMzUV9uMWc -------------------------------------------------------

1 0

gcc and avx (resend)
by Andrew Randrianasulu 12 Feb '19

12 Feb '19

resend without attached script. You can download it anyway, but better to save those scripts localy, i think? because online hosters may disappear .... ----------------- Well, I don't know asm, so i looked for some nice script for searching inside objdump's output.. Found this: https://superuser.com/questions/726395/how-to-check-if-a-binary-requires-ss… this leads to https://pastebin.com/A8bAuHAP (attached) running it on color3way plugin resulted in few AVX instructions! objdump -M intel -d /dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/color3way/i686/color3way.o | ./opcodes.sh -s SSE2 -s SSE3 -s SSE -s AVX | less ------------------------ 16e: c5 f8 77 vzeroupper -- 427: c5 f8 77 vzeroupper -- 69c: c5 f8 77 vzeroupper -- 721: c5 f8 77 vzeroupper -- e88: c5 f8 77 vzeroupper -- f20: c5 f8 77 vzeroupper -- 1000: c5 f8 77 vzeroupper -- 104e: c5 f8 77 vzeroupper -- 4130: c5 f8 77 vzeroupper ----------------------------- cflags were: cat /dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/color3way/i686/c_flags -O3 -march=native -mtune=native -D__STDC_CONSTANT_MACROS -DCIN="cin" -DCINLIB_DIR="/usr/lib/cin" -DCINDAT_DIR="/usr/share/cin" -DCONFIG_DIR="$HOME/.bcast5" -DPLUGIN_DIR="/usr/lib/cin/plugins" -DLOCALE_DIR="/usr/share/locale" -DLADSPA_DIR="/usr/lib/cin/ladspa" -DCIN_BROWSER="firefox" -fno-omit-frame-pointer -fno-math-errno -fno-signed-zeros -pthread -Wall -Wno-unknown-warning -Wno-unused-result -Wno-stringop-overflow -Wno-format-truncation -Wno-format-overflow -Wno-parentheses -Wno-stringop-truncation -D__STDC_CONSTANT_MACROS -D__STDC_LIMIT_MACROS -DPNG_SKIP_SETJMP_CHECK=1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include -I/usr/local/include -I/usr/include/freetype2 -I/usr/local/include/freetype2 -I/usr/include/uuid -I/usr/local/include/uuid -I/usr/include/mjpegtools -I/usr/local/include/mjpegtools -I/usr/include/OpenEXR -I/usr/local/include/OpenEXR -DHAVE_CIN_3RDPARTY -DHAVE_GL -DHAVE_XFT -DHAVE_XXF86VM -DHAVE_OSS -DHAVE_ALSA -DHAVE_FIREWIRE -DHAVE_DV -DHAVE_DVB -DHAVE_VIDEO4LINUX2 -DHAVE_OPENEXR -DHAVE_LV2 -DHAVE_COMMERCIAL -DHAVE_LIBZMPEG -DHAVE_SHUTTLE -I../ -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../cinelerra -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../guicast -I../colors -fPIC -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/a52dec-0.7.4/include -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/djbfft-0.76/. -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/ffmpeg-4.1/. -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/giflib-5.1.4/lib -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/ilmbase-2.2.1/Iex -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/ilmbase-2.2.1/Half -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/ilmbase-2.2.1/Imath -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/ilmbase-2.2.1/config -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/ilmbase-2.2.1/IlmThread -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/lame-3.100/include -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/libraw1394-2.1.2/. -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/libogg-1.3.3/include -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/libtheora-1.1.1/. -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/libuuid-1.0.3/. -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/libvorbis-1.3.6/include -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/libvorbis-1.3.6/. -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/mjpegtools-2.1.0/. -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/mjpegtools-2.1.0/lavtools -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/mjpegtools-2.1.0/utils -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/libaom-v1.0.0/usr/local/include -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/openexr-2.2.1/IlmImf -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/openexr-2.2.1/config -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/openjpeg-2.3.0/src/lib/openjp2 -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/twolame-0.3.13/libtwolame -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/x264-snapshot-20190117-2245-stable/. -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/x265_3.0/. -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/x265_3.0/source -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/libvpx-1.7.0/. -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/opus-1.3/include -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/lv2-1.14.0/usr/local/include -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/lv2-1.14.0/usr/local/lib64/lv2 -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/lv2-1.14.0/usr/local/lib/lv2 -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/lilv-0.24.2/usr/local/include -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/sratom-0.6.0/usr/local/include -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/serd-0.28.0/usr/local/include -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/sord-0.16.0/usr/local/include -I/dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/../thirdparty/suil-0.8.4/usr/local/include but resulting speed still around 9 fps :(

1 0

Autovectorization works! (resend)
by Andrew Randrianasulu 12 Feb '19

12 Feb '19

resend without attached image ------------------ At last for my machine ..not sure if it will break some plugins? from http://gcc.gnu.org/projects/tree-ssa/vectorization.html " To enable vectorization of floating point reductions use -ffast-math or -fassociative-math." I added -ffast-math -ftree-vectorizer-verbose=2 to CFLAGS (global, but I recompiled and installed only color3way plugin) and now we have tons of assmebly! objdump -M intel -d /dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/color3way/i686/color3way.o | ./opcodes.sh -s SSE2 -s SSE3 -s SSE -s AVX -s FMA | less --------------------- 16e: c5 f8 77 vzeroupper -- 427: c5 f8 77 vzeroupper -- 6cc: c5 f8 77 vzeroupper -- 751: c5 f8 77 vzeroupper -- 80e: c5 fa 10 81 00 00 00 vmovss xmm0,DWORD PTR [ecx+0x0] -- 816: c5 fb 10 89 00 00 00 vmovsd xmm1,QWORD PTR [ecx+0x0] -- 824: c5 fa 10 12 vmovss xmm2,DWORD PTR [edx] 828: c5 ea 5c 10 vsubss xmm2,xmm2,DWORD PTR [eax] 82c: c5 e8 54 d0 vandps xmm2,xmm2,xmm0 830: c5 ea 5a d2 vcvtss2sd xmm2,xmm2,xmm2 834: c5 f9 2f d1 vcomisd xmm2,xmm1 -- 83e: c5 fa 10 52 0c vmovss xmm2,DWORD PTR [edx+0xc] 843: c5 ea 5c 50 0c vsubss xmm2,xmm2,DWORD PTR [eax+0xc] 848: c5 e8 54 d0 vandps xmm2,xmm2,xmm0 84c: c5 ea 5a d2 vcvtss2sd xmm2,xmm2,xmm2 850: c5 f9 2f d1 vcomisd xmm2,xmm1 -- 85a: c5 fa 10 52 18 vmovss xmm2,DWORD PTR [edx+0x18] 85f: c5 ea 5c 50 18 vsubss xmm2,xmm2,DWORD PTR [eax+0x18] 864: c5 e8 54 d0 vandps xmm2,xmm2,xmm0 868: c5 ea 5a d2 vcvtss2sd xmm2,xmm2,xmm2 86c: c5 f9 2f d1 vcomisd xmm2,xmm1 -- 876: c5 fa 10 52 24 vmovss xmm2,DWORD PTR [edx+0x24] 87b: c5 ea 5c 50 24 vsubss xmm2,xmm2,DWORD PTR [eax+0x24] 880: c5 e8 54 d0 vandps xmm2,xmm2,xmm0 884: c5 ea 5a d2 vcvtss2sd xmm2,xmm2,xmm2 888: c5 f9 2f d1 vcomisd xmm2,xmm1 -- 892: c5 fa 10 52 04 vmovss xmm2,DWORD PTR [edx+0x4] 897: c5 ea 5c 50 04 vsubss xmm2,xmm2,DWORD PTR [eax+0x4] 89c: c5 e8 54 d0 vandps xmm2,xmm2,xmm0 8a0: c5 ea 5a d2 vcvtss2sd xmm2,xmm2,xmm2 8a4: c5 f9 2f d1 vcomisd xmm2,xmm1 -- 8ae: c5 fa 10 52 10 vmovss xmm2,DWORD PTR [edx+0x10] 8b3: c5 ea 5c 50 10 vsubss xmm2,xmm2,DWORD PTR [eax+0x10] 8b8: c5 e8 54 d0 vandps xmm2,xmm2,xmm0 8bc: c5 ea 5a d2 vcvtss2sd xmm2,xmm2,xmm2 8c0: c5 f9 2f d1 vcomisd xmm2,xmm1 -- and so on! Now I have like 15 fps for same 1280x720x30 h264 video + color3way plugin (one track)

1 0

Autovectorization works!
by Andrew Randrianasulu 11 Feb '19

11 Feb '19

At last for my machine ..not sure if it will break some plugins? from http://gcc.gnu.org/projects/tree-ssa/vectorization.html " To enable vectorization of floating point reductions use -ffast-math or -fassociative-math." I added -ffast-math -ftree-vectorizer-verbose=2 to CFLAGS (global, but I recompiled and installed only color3way plugin) and now we have tons of assmebly! objdump -M intel -d /dev/shm/tmp/cinelerra-goodguy-20190211/cinelerra-5.1/plugins/color3way/i686/color3way.o | ./opcodes.sh -s SSE2 -s SSE3 -s SSE -s AVX -s FMA | less --------------------- 16e: c5 f8 77 vzeroupper -- 427: c5 f8 77 vzeroupper -- 6cc: c5 f8 77 vzeroupper -- 751: c5 f8 77 vzeroupper -- 80e: c5 fa 10 81 00 00 00 vmovss xmm0,DWORD PTR [ecx+0x0] -- 816: c5 fb 10 89 00 00 00 vmovsd xmm1,QWORD PTR [ecx+0x0] -- 824: c5 fa 10 12 vmovss xmm2,DWORD PTR [edx] 828: c5 ea 5c 10 vsubss xmm2,xmm2,DWORD PTR [eax] 82c: c5 e8 54 d0 vandps xmm2,xmm2,xmm0 830: c5 ea 5a d2 vcvtss2sd xmm2,xmm2,xmm2 834: c5 f9 2f d1 vcomisd xmm2,xmm1 -- 83e: c5 fa 10 52 0c vmovss xmm2,DWORD PTR [edx+0xc] 843: c5 ea 5c 50 0c vsubss xmm2,xmm2,DWORD PTR [eax+0xc] 848: c5 e8 54 d0 vandps xmm2,xmm2,xmm0 84c: c5 ea 5a d2 vcvtss2sd xmm2,xmm2,xmm2 850: c5 f9 2f d1 vcomisd xmm2,xmm1 -- 85a: c5 fa 10 52 18 vmovss xmm2,DWORD PTR [edx+0x18] 85f: c5 ea 5c 50 18 vsubss xmm2,xmm2,DWORD PTR [eax+0x18] 864: c5 e8 54 d0 vandps xmm2,xmm2,xmm0 868: c5 ea 5a d2 vcvtss2sd xmm2,xmm2,xmm2 86c: c5 f9 2f d1 vcomisd xmm2,xmm1 -- 876: c5 fa 10 52 24 vmovss xmm2,DWORD PTR [edx+0x24] 87b: c5 ea 5c 50 24 vsubss xmm2,xmm2,DWORD PTR [eax+0x24] 880: c5 e8 54 d0 vandps xmm2,xmm2,xmm0 884: c5 ea 5a d2 vcvtss2sd xmm2,xmm2,xmm2 888: c5 f9 2f d1 vcomisd xmm2,xmm1 -- 892: c5 fa 10 52 04 vmovss xmm2,DWORD PTR [edx+0x4] 897: c5 ea 5c 50 04 vsubss xmm2,xmm2,DWORD PTR [eax+0x4] 89c: c5 e8 54 d0 vandps xmm2,xmm2,xmm0 8a0: c5 ea 5a d2 vcvtss2sd xmm2,xmm2,xmm2 8a4: c5 f9 2f d1 vcomisd xmm2,xmm1 -- 8ae: c5 fa 10 52 10 vmovss xmm2,DWORD PTR [edx+0x10] 8b3: c5 ea 5c 50 10 vsubss xmm2,xmm2,DWORD PTR [eax+0x10] 8b8: c5 e8 54 d0 vandps xmm2,xmm2,xmm0 8bc: c5 ea 5a d2 vcvtss2sd xmm2,xmm2,xmm2 8c0: c5 f9 2f d1 vcomisd xmm2,xmm1 -- and so on! Now I have like 15 fps for same 1280x720x30 h264 video + color3way plugin (one track)

1 0