- Cin - Cinelerra-GG Mailing Lists

Adding soft subtitles to a DVD video
by Terje J. Hanssen 16 Feb '24

16 Feb '24

There are two things I want to add to my current intermediate DVD mpg video files created with ffmpeg, and/or to the DVD tree structure created with DeVeDeNG: 1. Create and add a Navigation menu in the beginning This will be an upcoming, separate topic 2. Create and add Soft Subtitles as simple text info commentaries to the video content This is the topic for this post. The reason that I want *Soft* Subtitles as a separate text file stream related to timing, is because this should be possible to *add* or import to an existing video file without the need to re-encode. It should also be flexible to display on or off during playback, if I have understood this correct so far. 2.1 Preferably I want to add/import subtitles as fast and easy using GUI interactive tools like DeVeDeNG or VLC if possible? Next thereafter could be using the more time consuming ffmpeg https://www.baeldung.com/linux/subtitles-ffmpeg#how-to-add-soft-subtitles 2.2 So is the question if learning a special subtitle editor is necessary to create the text file easier, like one of these 5 https://www.debugpoint.com/3-great-subtitle-editors-in-linux-systems/ Tip, suggestions or experience how to do this?

3 13

OT: mp3guessenc
by Andrew Randrianasulu 14 Feb '24

14 Feb '24

Was looking for xing media software, found this little open-source utility printing info on mpeg audio files, including this rare multichannel extension! https://mp3guessenc.sourceforge.io/

2 1

Patch HDR for Color3way
by Andrea paz 10 Feb '24

10 Feb '24

>From this forum thread: https://www.cinelerra-gg.org/forum/help-video/problem-with-colour3way/ After the patch to make Color3way work in float, even with values above the range (0 - 1.0f), this problem occurs: "If I move the Shadows Value slider to the left, by the time it reaches 0.006 the image is almost totally black, which makes it totally useless." and: "I confirm the problem. The color wheel also behaves the same way, while the saturation slider works normally. Midtone and Highlight work normally." The applicated HDR patches can be seen here: https://git.cinelerra-gg.org/git/?p=goodguy/cinelerra.git;a=commitdiff;h=3c… I've tried a few builds/tests. The patches for Overlays and for Histogram plugin seem to work normally. Only the patch for Color3way causes a problem. This problem occurs only for shadows, which is strange because the patch only alters the white boundary and leaves the black boundary unchanged. I tried to read the plugin code but I am not able to understand the problem. Does anyone understand anything about it? For now you could exclude the Color3way patch but put the other two back in. PS: Using the overlays in the patchbay seems to me that the PorterDuff do not work. This does not depend on the patch because I have the same behavior even with the old appimages without the patch...

3 3

LV2 with Python 3.12 patches
by Phyllis Smith 09 Feb '24

09 Feb '24

I am hoping that Andrea can test the attached patches for LV2 which makes it work on Python 3.12 on Fedora39. Need testing to compare to make sure sounds correct between Before patches and After patches - especially the Calf plugins but other LV2 plugins too. Do NOT need 3.12 python because I want to make sure it works currently and I have already tested on Fedora 39 with Python 3.12. Before the patches, CinGG would not build so even if the patches are not 100% correct for 3.12, at least it will still build. No other changes needed -- just put these 6 small patch files in the cinelerra thirdparty/src subdirectory and do a full rebuild.

2 3

rusticl and DaVinch Resolve (round N)
by Andrew Randrianasulu 05 Feb '24

05 Feb '24

https://chaos.social/@karolherbst/111827770287551625 ===== Some rusticl info for AMD users Once this MR lands (and appears in 23.3 as well) Davinci Resolve should "just work" with `RUSTICL_ENABLE=radeonsi` set in the env. It already works without it on Navi GPUs, this MR just fixes a crash on older ones. https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27295 ==== quote ends ===

2 5

qctools, sonic lineup
by Andrew Randrianasulu 02 Feb '24

02 Feb '24

Sorry Terje if I was too rough in my previous email. I am definitely very much want to have as error-free transcode (and as little transcode as possible in general) as you, for same reason. I am not sure you can absolutely trust ffmpeg for not doing any conversion by default. For example 6.1 seems to upconvert 16 bit audio when you select dvd_pcm audio output. /dev/shm/ffmpeg/ffmpeg -i /home/guest/CIN51.mp4 -target pal-dvd -c:a pcm_dvd -f dvd /dev/shm/cin51.mpeg ah, it only does so if decoder output floats by default (aac, may be mp3 too?) for dv it was 16 to 16. Not sure how good internal ffmpeg muxer for dvd file creation, but you probably can test this by reusing cingg created audio and video files from dvd master. I have few more ideas to test and smart-up our bash script so it will use wav output + sox + mplex automatically if wav or pcm file was detected in output directory (so you can set easy wav output and do not care about BE pcm file and its extension), but again I need some time to test this. I was looking for some quality control tools and found qctools and this post specifically on stackexchange https://sound.stackexchange.com/questions/40222/show-the-differences-betwee… it mentions program named Sonic Lineup, hopefully easy (and working on Linux) way to compare two audio files. Not sure if it supports dvd audio tho .... https://sonicvisualiser.org/sonic-lineup/index.html qctools are more aiming at video quality metrics, just build their latest tool: https://mediaarea.net/QCTools I am sure you can get Appimage or even rpm from their site.

2 7

OT HDV 1080i to DVD 16x9 with MP2 audio
by Terje J. Hanssen 01 Feb '24

01 Feb '24

I start a new thread on this topic because the previous one became long. This time as a procedure to convert HDV video and copy MP2 audio to a DVD-Video compliant MPG file, by applying optional free tools ========================================================= HDV to DVD 16x9 video using FFmpeg, DevedeNG and Xorriso ========================================================= 1) Concatenation hdv clips: cat hdv01.m2t hdv01_01.m2t hdv01_02.m2t hdv01_03.m2t hdv01_04.m2t hdv01_05.m2t > HDV01-2007.m2t du -sh HDV01-2007.m2t 12G HDV01-2007.m2t 2) Converting HDV video and copying MP2 audio to a DVD-Video compliant MPG file by applying and customizing a WinFF DVD Widecreen Video profile Suggestion to a cleaner output? Some are expected due to joining unclean clip cuts. But what cause "Multiple -c, -codec, -acodec, -vcodec, -scodec or -dcodec options specified for stream 1"? ffmpeg -hide_banner -i HDV01-2007.m2t -f dvd -target pal-dvd -aspect 16:9 -b:v 8M -maxrate 8M -minrate 8M -bufsize 20M -muxrate 10M -mbd rd -trellis 1 -cmp 0 -subcmp 2 -c:a copy dvd_16x9_copy_mp2_ffmpeg_HDV01-2007.mpg [mpegts @ 0x562aa92c2b80] Could not find codec parameters for stream 2 (Unknown: none ([160][0][0][0] / 0x00A0)): unknown codec Consider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) options [mpegts @ 0x562aa92c2b80] Could not find codec parameters for stream 3 (Unknown: none ([161][0][0][0] / 0x00A1)): unknown codec Consider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) options Input #0, mpegts, from 'HDV01-2007.m2t': Duration: 01:02:20.32, start: 0.440000, bitrate: 26168 kb/s Program 100 Stream #0:0[0x810]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, bt709, top first), 1440x1080 [SAR 4:3 DAR 16:9], 25000 kb/s, 25 fps, 25 tbr, 90k tbn Side data: cpb: bitrate max/min/avg: 25000000/0/0 buffer size: 7340032 vbv_delay: N/A Stream #0:1[0x814]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, fltp, 384 kb/s Stream #0:2[0x815]: Unknown: none ([160][0][0][0] / 0x00A0) Stream #0:3[0x811]: Unknown: none ([161][0][0][0] / 0x00A1) Multiple -c, -codec, -acodec, -vcodec, -scodec or -dcodec options specified for stream 1, only the last option '-c:a copy' will be used. Stream mapping: Stream #0:0 -> #0:0 (mpeg2video (native) -> mpeg2video (native)) Stream #0:1 -> #0:1 (copy) Press [q] to stop, [?] for help Output #0, dvd, to 'dvd_16x9_copy_mp2_ffmpeg_HDV01-2007.mpg': Metadata: encoder : Lavf60.16.100 Stream #0:0: Video: mpeg2video (Main), yuv420p(tv, bt709, top coded first (swapped)), 720x576 [SAR 64:45 DAR 16:9], q=2-31, 8000 kb/s, 25 fps, 90k tbn Metadata: encoder : Lavc60.31.102 mpeg2video Side data: cpb: bitrate max/min/avg: 9000000/0/8000000 buffer size: 1835008 vbv_delay: N/A Stream #0:1: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, fltp, 448 kb/s [mpegts @ 0x562aa92c2b80] Packet corrupt (stream = 0, dts = 45716400).0.8kbits/s speed=7.25x [in#0/mpegts @ 0x562aa92c2a40] corrupt input packet in stream 0 [mpeg2video @ 0x562aa9522dc0] ac-tex damaged at 3 25 [mpeg2video @ 0x562aa9522dc0] Warning MVs not available [mpeg2video @ 0x562aa9522dc0] concealing 3870 DC, 3870 AC, 3870 MV errors in B frame [vist#0:0/mpeg2video @ 0x562aa92f2540] corrupt decoded frame [mpegts @ 0x562aa92c2b80] PES packet size mismatch [mpegts @ 0x562aa92c2b80] Packet corrupt (stream = 1, dts = 45699840). [mpegts @ 0x562aa92c2b80] Packet corrupt (stream = 0, dts = 45820800). [in#0/mpegts @ 0x562aa92c2a40] corrupt input packet in stream 0 [mpeg2video @ 0x562aa9522dc0] ac-tex damaged at 85 13 [mpeg2video @ 0x562aa9522dc0] Warning MVs not available [mpeg2video @ 0x562aa9522dc0] concealing 4950 DC, 4950 AC, 4950 MV errors in B frame [vist#0:0/mpeg2video @ 0x562aa92f2540] corrupt decoded frame [mpegts @ 0x562aa92c2b80] Packet corrupt (stream = 0, dts = 81907200).8.7kbits/s dup=43 drop=0 speed=6.76x [in#0/mpegts @ 0x562aa92c2a40] corrupt input packet in stream 0 [vist#0:0/mpeg2video @ 0x562aa92f2540] timestamp discontinuity (stream id=2064): -9080000, new offset= 9080000 [mpeg2video @ 0x562aa9522dc0] invalid cbp -1 at 32 11 [mpeg2video @ 0x562aa9522dc0] Warning MVs not available [mpeg2video @ 0x562aa9522dc0] concealing 5130 DC, 5130 AC, 5130 MV errors in B frame [vist#0:0/mpeg2video @ 0x562aa92f2540] corrupt decoded frame [mpegts @ 0x562aa92c2b80] PES packet size mismatch [mpegts @ 0x562aa92c2b80] Packet corrupt (stream = 1, dts = 81890640). [aist#0:1/mp2 @ 0x562aa95505c0] timestamp discontinuity (stream id=2068): -8840000, new offset= 17920000 [mpegts @ 0x562aa92c2b80] Packet corrupt (stream = 0, dts = 81655200).1.9kbits/s dup=264 drop=0 speed=6.78x [in#0/mpegts @ 0x562aa92c2a40] corrupt input packet in stream 0 [mpeg2video @ 0x562aa9522dc0] ac-tex damaged at 36 43 [mpeg2video @ 0x562aa9522dc0] Warning MVs not available [mpeg2video @ 0x562aa9522dc0] concealing 2250 DC, 2250 AC, 2250 MV errors in I frame [vist#0:0/mpeg2video @ 0x562aa92f2540] corrupt decoded frame [mpegts @ 0x562aa92c2b80] Packet corrupt (stream = 0, dts = 117122400)..0kbits/s dup=287 drop=0 speed=6.78x [in#0/mpegts @ 0x562aa92c2a40] corrupt input packet in stream 0 [mpegts @ 0x562aa92c2b80] PES packet size mismatch [mpegts @ 0x562aa92c2b80] Packet corrupt (stream = 1, dts = 117113040). [mpeg2video @ 0x562aa9522dc0] ac-tex damaged at 66 67 [mpeg2video @ 0x562aa9522dc0] Warning MVs not available [mpeg2video @ 0x562aa9522dc0] concealing 73 DC, 73 AC, 73 MV errors in P frame [vist#0:0/mpeg2video @ 0x562aa92f2540] corrupt decoded frame [mpegts @ 0x562aa92c2b80] Packet corrupt (stream = 0, dts = 122598000)..1kbits/s dup=307 drop=0 speed=6.82x [in#0/mpegts @ 0x562aa92c2a40] corrupt input packet in stream 0 [mpeg2video @ 0x562aa9522dc0] ac-tex damaged at 53 42 [mpeg2video @ 0x562aa9522dc0] Warning MVs not available [mpeg2video @ 0x562aa9522dc0] concealing 2336 DC, 2336 AC, 2336 MV errors in P frame [vist#0:0/mpeg2video @ 0x562aa92f2540] corrupt decoded frame [mpegts @ 0x562aa92c2b80] Packet corrupt (stream = 0, dts = 209030400)..2kbits/s dup=333 drop=0 speed= 6.7x [in#0/mpegts @ 0x562aa92c2a40] corrupt input packet in stream 0 [mpegts @ 0x562aa92c2b80] PES packet size mismatch [mpegts @ 0x562aa92c2b80] Packet corrupt (stream = 1, dts = 209014560). [mpeg2video @ 0x562aa9522dc0] ac-tex damaged at 10 15 [mpeg2video @ 0x562aa9522dc0] Warning MVs not available [mpeg2video @ 0x562aa9522dc0] concealing 4770 DC, 4770 AC, 4770 MV errors in P frame [vist#0:0/mpeg2video @ 0x562aa92f2540] corrupt decoded frame [mpeg2video @ 0x562aa9522dc0] ac-tex damaged at 35 1035.48 bitrate=8121.7kbits/s dup=353 drop=0 speed=6.74x [mpeg2video @ 0x562aa9522dc0] Warning MVs not available [mpeg2video @ 0x562aa9522dc0] concealing 5220 DC, 5220 AC, 5220 MV errors in P frame [vist#0:0/mpeg2video @ 0x562aa92f2540] corrupt decoded frame [out#0/dvd @ 0x562aa935bac0] video:3486651kB audio:175455kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 1.736119% frame=93956 fps=168 q=2.0 Lsize= 3725684kB time=01:02:38.16 bitrate=8121.2kbits/s dup=355 drop=0 speed=6.74x --------------------- du -sh dvd*.mpg 3,6G dvd_16x9_copy_mp2_ffmpeg_HDV01-2007.mpg ffprobe -hide_banner dvd_16x9_copy_mp2_ffmpeg_HDV01-2007.mpg [mpeg @ 0x563adeaee080] start time for stream 0 is not set in estimate_timings_from_pts Input #0, mpeg, from 'dvd_16x9_copy_mp2_ffmpeg_HDV01-2007.mpg': Duration: 01:02:38.24, start: 0.540000, bitrate: 8121 kb/s Stream #0:0[0x1bf]: Data: dvd_nav_packet Stream #0:1[0x1e0]: Video: mpeg2video (Main), yuv420p(tv, bt709, progressive), 720x576 [SAR 64:45 DAR 16:9], 25 fps, 25 tbr, 90k tbn Side data: cpb: bitrate max/min/avg: 9000000/0/0 buffer size: 1835008 vbv_delay: N/A Stream #0:2[0x1c0]: Audio: mp2, 48000 Hz, stereo, s16p, 384 kb/s Unsupported codec with id 98312 for input stream 0 ---------------------------- 3) Creating DVD-Video with DevedeNG Add: dvd_16x9_copy_mp2_ffmpeg_HDV01-2007.mpg and highlight it Properities > Misch: check This file is already a DVD suitable MPEG-PS file keep Use a GOP of 12 frames (compatibility) Use Directory location and DVD directory name Further; Creating DVD structure and iso tree -sh DVD_16x9_copy_mp2_ffmpeg_HDV01-2007 DVD_16x9_copy_mp2_ffmpeg_HDV01-2007 ├── [3.6G] DVD_16x9_copy_mp2_ffmpeg_HDV01-2007.iso ├── [4.0K] dvd_tree │ ├── [4.0K] AUDIO_TS │ └── [4.0K] VIDEO_TS │ ├── [ 12K] VIDEO_TS.BUP │ ├── [ 12K] VIDEO_TS.IFO │ ├── [ 32K] VIDEO_TS.VOB │ ├── [ 18K] VTS_01_0.BUP │ ├── [ 18K] VTS_01_0.IFO │ ├── [3.9M] VTS_01_0.VOB │ ├── [ 32K] VTS_01_1.VOB │ ├── [ 48K] VTS_02_0.BUP │ ├── [ 48K] VTS_02_0.IFO │ ├── [ 32K] VTS_02_0.VOB │ ├── [1024M] VTS_02_1.VOB │ ├── [1024M] VTS_02_2.VOB │ ├── [1024M] VTS_02_3.VOB │ └── [566M] VTS_02_4.VOB ├── [4.0K] menu │ ├── [2.9K] menu_0_active_bg.png │ ├── [ 62K] menu_0_bg.png │ ├── [3.9M] menu_0B.mpg │ ├── [3.9M] menu_0.mpg │ ├── [2.9K] menu_0_selected_bg.png │ ├── [1.7K] menu_0_unselected_bg.png │ └── [ 484] menu_0.xml ├── [4.0K] movies │ └── [3.6G] movie_0.mpg └── [4.0K] xml_data └── [1.9K] dvdauthor.xml -------------------------------- Testing playback OK ffplay -hide_banner /home/terje/Videoklipp/M2T-MOV/DVD_16x9_copy_mp2_ffmpeg_HDV01-2007/movies/movie_0.mpg [mpeg @ 0x7fbfd8000cc0] start time for stream 0 is not set in estimate_timings_from_pts Input #0, mpeg, from '/home/terje/Videoklipp/M2T-MOV/DVD_16x9_copy_mp2_ffmpeg_HDV01-2007/movies/movie_0.mpg': Duration: 01:02:38.24, start: 0.540000, bitrate: 8121 kb/s Stream #0:0[0x1bf]: Data: dvd_nav_packet Stream #0:1[0x1e0]: Video: mpeg2video (Main), yuv420p(tv, bt709, progressive), 720x576 [SAR 64:45 DAR 16:9], 25 fps, 25 tbr, 90k tbn Side data: cpb: bitrate max/min/avg: 9000000/0/0 buffer size: 1835008 vbv_delay: N/A Stream #0:2[0x1c0]: Audio: mp2, 48000 Hz, stereo, s16p, 384 kb/s 20.67 A-V: -0.006 fd= 0 aq= 47KB vq= 1209KB sq= 0B f=0/0 --------------- cd /home/terje/Videoklipp/M2T-MOV/DVD_16x9_copy_mp2_ffmpeg_HDV01-2007 ls DVD_16x9_copy_mp2_ffmpeg_HDV01-2007.iso DVD_16x9_copy_mp2_ffmpeg_HDV01-2007.iso dvd_tree menu movies xml_data 4) Burning the iso to a DVD+RW disk xorriso -as cdrecord -v -sao dev=/dev/sr1 DVD_16x9_copy_mp2_ffmpeg_HDV01-2007.iso xorriso 1.4.6 : RockRidge filesystem manipulator, libburnia project. Drive current: -outdev '/dev/sr1' Media current: DVD+RW Media status : is blank Media summary: 0 sessions, 0 data blocks, 0 data, 4483m free Beginning to write data track. xorriso : UPDATE : Formatting. Working since 0 seconds xorriso : UPDATE : Formatting. Working since 1 seconds xorriso : UPDATE : Formatting. Working since 2 seconds xorriso : UPDATE : Formatting. Working since 3 seconds xorriso : UPDATE : Formatting. Working since 4 seconds libburn : NOTE : Write start address is 0 * 2048 xorriso : UPDATE : 0 of 3643 MB written (fifo 99%) [buf 0%] 0.0x. xorriso : UPDATE : 0 of 3643 MB written (fifo 99%) [buf 0%] 0.0x. xorriso : UPDATE : 0 of 3643 MB written (fifo 99%) [buf 0%] 0.4x. xorriso : UPDATE : 0 of 3643 MB written (fifo 99%) [buf 0%] 0.0x. xorriso : UPDATE : 6 of 3643 MB written (fifo 97%) [buf 99%] 4.1x. .......... xorriso : UPDATE : 3621 of 3643 MB written (fifo 97%) [buf 99%] 4.0x. xorriso : UPDATE : 3626 of 3643 MB written (fifo 97%) [buf 99%] 4.0x. xorriso : UPDATE : 3631 of 3643 MB written (fifo 98%) [buf 99%] 4.0x. xorriso : UPDATE : 3637 of 3643 MB written (fifo 99%) [buf 99%] 4.0x. xorriso : UPDATE : 3642 of 3643 MB written (fifo 19%) [buf 99%] 4.0x. xorriso : UPDATE : Closing track/session. Working since 709 seconds xorriso : UPDATE : Closing track/session. Working since 710 seconds xorriso : UPDATE : Closing track/session. Working since 711 seconds xorriso : UPDATE : Closing track/session. Working since 712 seconds Writing to '/dev/sr1' completed successfully. xorriso : NOTE : Re-assessing -outdev '/dev/sr1' Drive current: -outdev '/dev/sr1' Media current: DVD+RW Media status : is written , is appendable Media summary: 1 session, 1865398 data blocks, 3643m data, 839m free ------------------ Tested the DVD-Video disk playback ok in a DVD standalone player and ditto BD player. Visual impression: HDV down-conversion (oversampling) to 16x9 DVD-Video results in noticeable better quality than former DV source.

2 2

Audio out of sync when rendering MP4s
by Matteo Bini 01 Feb '24

01 Feb '24

Hello Cinelerra GG developers, I've found a strange behaviour in this great editing software. When I render my project, sometimes the audio is out of sync. Not all the audio, but from a certain point, from half of the video the audio is out of sync and it gets worst the more we get to the end of the video. It's like latency piles up. I've only done MP4 renderings so far. My idea, but I don't know how to demonstrate it, is that ffmpeg doesn't know how to render audio and video in sync, when there's some audio that is not aligned on frames. Since I do a lot of precise audio editing in my project, there are some audio cuts that are not aligned on frames. It's not a big problem, I just wanted to let you know. The solution is very simple: render only the video track, then render the audio track in WAV and then mux them together with ffmpeg, copying the video track and encoding the audio one. This way the video is perfectly in sync with the audio. The strange thing is that, when I watch my project from the compositor window, audio and video are in sync. Thank you for making Cinelerra GG a really great free software. -- Matteo Bini

5 5

encode2mpeg with two small fixes
by Andrew Randrianasulu 01 Feb '24

01 Feb '24

Repo: https://github.com/Randrianasulu/encode2mpeg after installing mctoolame and pcm2aiff from iso-dist10 (also on my github) I can run such line: encode2mpeg -svcd -mp2 mctoolame -mpegchannels 6 -n p -imageonly /dev/shm/matrixbench_highdivx_ac3.avi -o /dev/shm/svcd_test.iso ==== long log ==== bash-5.1$ encode2mpeg -svcd -mp2 mctoolame -mpegchannels 6 -n p -imageonly /dev/shm/matrixbench_highdivx_ac3.avi -o /dev/shm/svcd_test.iso ++ WARN: [encode2mpeg] total video+audio bitrate (2500+393kbps) exceed SVCD specifications (2778kbps) WARNING you have an unsupported version of MPlayer [SVN-r38447-11.2.0] you need MPlayer 1.0rc1 or a later stable relase, encode2mpeg can fail Press return to proceed ++ WARN: [encode2mpeg] selected aspect ratio [4/3] and source aspect ratio [undefined] are different This codecs.conf is too old and incompatible with this MPlayer release! at line 6 MPlayer SVN-r38447-11.2.0 (C) 2000-2023 MPlayer Team CPU vendor name: AuthenticAMD max cpuid level: 13 CPU: AMD FX(tm)-4300 Quad-Core Processor (Family: 21, Model: 2, Stepping: 0) extended cpuid-level: 30 extended cache-info: 134250816 Detected cache-line size is 64 bytes Testing OS support for SSE... yes. Tests of OS support for SSE passed. CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNowExt: 0 SSE: 1 SSE2: 1 SSE3: 1 SSSE3: 1 SSE4: 1 SSE4.2: 1 AVX: 1 Compiled with runtime CPU detection. get_path('codecs.conf') -> '/home/guest/.mplayer/codecs.conf' Reading optional codecs config file /home/guest/.mplayer/codecs.conf: Reading optional codecs config file /usr/etc/mplayer/codecs.conf: No such file or directory Using built-in default codecs.conf. init_freetype Using SSE2 Optimized OnScreenDisplay get_path('fonts') -> '/home/guest/.mplayer/fonts' Configuration: --prefix=/usr --enable-radio --enable-radio-capture --enable-xvmc --enable-runtime-cpudetection --extra-cflags=-Wno-error=implicit-function-declaration --extra-ldflags=-latomic CommandLine: '/dev/shm/matrixbench_highdivx_ac3.avi' '-channels' '6' '-noframedrop' '-v' '-osdlevel' '0' '-vo' 'yuv4mpeg:file=/dev/fd/4' '-ao' 'pcm:waveheader:fast:file=%26%/dev/shm/svcd_test.iso.wav' Using nanosleep() timing get_path('input.conf') -> '/home/guest/.mplayer/input.conf' Reading optional input config file /home/guest/.mplayer/input.conf: No such file or directory Reading optional input config file /usr/etc/mplayer/input.conf: No such file or directory Falling back on default (hardcoded) input config Setting up LIRC support... do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. get_path('matrixbench_highdivx_ac3.avi.conf') -> '/home/guest/.mplayer/matrixbench_highdivx_ac3.avi.conf' Playing /dev/shm/matrixbench_highdivx_ac3.avi. get_path('sub/') -> '/home/guest/.mplayer/sub/' [file] File size is 48078848 bytes STREAM: [file] /dev/shm/matrixbench_highdivx_ac3.avi STREAM: Description: File STREAM: Author: Albeu STREAM: Comment: based on the code from ??? (probably Arpi) libavformat version 60.20.100 (internal) Configuration: --enable-gpl --enable-postproc LAVF_check: AVI (Audio Video Interleaved) AVI file format detected. list_end=0x2286 ======= AVI Header ======= us/frame: 40000 (fps=25.000) max bytes/sec: 0 padding: 0 MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED frames total: 4691 initial: 0 streams: 2 Suggested BufferSize: 0 Size: 720 x 576 ========================== list_end=0x10F4 ==> Found video stream: 0 [aviheader] Video stream found, -vid 0 ====== STREAM Header ===== Type: vids FCC: div3 (33766964) Flags: 0 Priority: 0 Language: 0 InitialFrames: 0 Rate: 25/1 = 25.000 Start: 0 Len: 4691 Suggested BufferSize: 46639 Quality 5000 Sample size: 0 ========================== Found 'bih', 40 bytes of 40 ======= VIDEO Format ====== biSize 40 biWidth 720 biHeight 576 biPlanes 1 biBitCount 24 biCompression 861292868='DIV3' biSizeImage 1244160 =========================== Regenerating keyframe table for DIVX3 video. list_end=0x217A ==> Found audio stream: 1 [aviheader] Audio stream found, -aid 1 ====== STREAM Header ===== Type: auds FCC: (0) Flags: 0 Priority: 0 Language: 0 InitialFrames: 1 Rate: 48000/1 = 48000.000 Start: 0 Len: 9006720 Suggested BufferSize: 24000 Quality -1 Sample size: 1 ========================== Found 'wf', 18 bytes of 18 ======= WAVE Format ======= Format Tag: 8192 (0x2000) Channels: 5 Samplerate: 48000 avg byte/sec: 48000 Block align: 1 bits/sample: 0 cbSize: 18 Unknown extra header dump: [0] [0] [0] [0] [0] [0] [0] [0] [0] [0] [71] [1] [0] [0] [78] [17] [9f] [f5] ========================================================================== list_end=0x2286 AVI: dmlh found (size=248) (total_frames=4691) list_end=0x2314 hdr=Software size=15 Software : Nandub v1.0rc2 hdr=Title size=16 Title : The Matrix Clip hdr=Subject size=16 Subject : The Matrix Clip hdr=Artist size=1 Artist : hdr=Copyright size=1 Copyright : hdr=Comments size=30 Comments : dolby digital 5.1 audiostream list_end=0x2DB53F8 Found movie at 0x280C - 0x2DB53F8 Reading INDEX block, 9371 chunks for 4691 frames (fpos=47928320). AVI index offset: 0x2808 (movi=0x280C idx0=0x4 idx1=0x5DCC) Auto-selected AVI audio ID = 1 Auto-selected AVI video ID = 0 AVI: Searching for audio stream (id:1) AVI video size=38834001 (4691) audio size=9006720 (9006720) VIDEO: [DIV3] 720x576 24bpp 25.000 fps 1655.7 kbps (202.1 kbyte/s) Auto-selected AVI video ID = 0 Auto-selected AVI audio ID = 1 [V] filefmt:3 fourcc:0x33564944 size:720x576 fps:25.000 ftime:=0.0400 Using (default) progressive frame mode. ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 60.36.100 (internal) Configuration: --enable-gpl --enable-postproc [msmpeg4 @ 0x577b01a0]Format yuv420p chosen by get_format(). INFO: libavcodec init OK! Selected video codec: [ffdivx] vfm: ffmpeg (FFmpeg DivX ;-) (MSMPEG-4 v3)) ========================================================================== Clip info: Software: Nandub v1.0rc2 Title: The Matrix Clip Subject: The Matrix Clip Artist: Copyright: Comments: dolby digital 5.1 audiostream Load subtitles in /dev/shm/ get_path('sub/') -> '/home/guest/.mplayer/sub/' ========================================================================== Forced audio codec: mad Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders dec_audio: Allocating 1536000 + 131072 = 1667072 bytes for output buffer. FFmpeg's libavcodec audio codec For transform of length 128, inverse, mdct_float, flags: [aligned, out_of_place], found 2 matches: 1: mdct_inv_float_c - type: mdct_float, len: [2, в€ћ], factors[2]: [2, any], flags: [unaligned, out_of_place, inv_only], prio: 96 2: mdct_naive_inv_float_c - type: mdct_float, len: [2, в€ћ], factors[2]: [2, any], flags: [unaligned, out_of_place, inv_only], prio: -130976 For transform of length 64, inverse, fft_float, flags: [aligned, inplace, preshuf], found 2 matches: 1: fft_pfa_ns_float_c - type: fft_float, len: [6, в€ћ], factors[2]: [7, 5, 3, 2, any], flags: [unaligned, inplace, out_of_place, preshuf], prio: 112 2: fft64_ns_float_c - type: fft_float, len: 64, factor: 2, flags: [unaligned, inplace, out_of_place, preshuf], prio: 96 Transform tree: mdct_inv_float_c - type: mdct_float, len: 128, factors[2]: [2, any], flags: [unaligned, out_of_place, inv_only] fft64_ns_float_c - type: fft_float, len: 64, factor: 2, flags: [unaligned, inplace, out_of_place, preshuf] For transform of length 256, inverse, mdct_float, flags: [aligned, out_of_place], found 2 matches: 1: mdct_inv_float_c - type: mdct_float, len: [2, в€ћ], factors[2]: [2, any], flags: [unaligned, out_of_place, inv_only], prio: 96 2: mdct_naive_inv_float_c - type: mdct_float, len: [2, в€ћ], factors[2]: [2, any], flags: [unaligned, out_of_place, inv_only], prio: -130976 For transform of length 128, inverse, fft_float, flags: [aligned, inplace, preshuf], found 2 matches: 1: fft_pfa_ns_float_c - type: fft_float, len: [6, в€ћ], factors[2]: [7, 5, 3, 2, any], flags: [unaligned, inplace, out_of_place, preshuf], prio: 112 2: fft128_ns_float_c - type: fft_float, len: 128, factor: 2, flags: [unaligned, inplace, out_of_place, preshuf], prio: 96 Transform tree: mdct_inv_float_c - type: mdct_float, len: 256, factors[2]: [2, any], flags: [unaligned, out_of_place, inv_only] fft128_ns_float_c - type: fft_float, len: 128, factor: 2, flags: [unaligned, inplace, out_of_place, preshuf] INFO: libavcodec "ac3" init OK! AUDIO: 48000 Hz, 6 ch, floatle, 384.0 kbit/4.17% (ratio: 48000->1152000) Selected audio codec: [ffac3] afm: ffmpeg (FFmpeg AC-3) ========================================================================== Building audio filter chain for 48000Hz/6ch/floatle -> 0Hz/0ch/??... [libaf] Adding filter dummy [dummy] Was reinitialized: 48000Hz/6ch/floatle [dummy] Was reinitialized: 48000Hz/6ch/floatle Trying preferred audio driver 'pcm', options 'waveheader:fast:file=%26%/dev/shm/svcd_test.iso.wav' [AO PCM] File: /dev/shm/svcd_test.iso.wav (WAVE) PCM: Samplerate: 48000Hz Channels: Stereo Format floatle [AO PCM] Info: Faster dumping is achieved with -benchmark -vc null -vo null -ao pcm:fast [AO PCM] Info: To write WAVE files use -ao pcm:waveheader (default). AO: [pcm] 48000Hz 6ch floatle (4 bytes per sample) AO: Description: RAW PCM/WAVE file writer audio output AO: Author: Atmosfear Building audio filter chain for 48000Hz/6ch/floatle -> 48000Hz/6ch/floatle... [dummy] Was reinitialized: 48000Hz/6ch/floatle [dummy] Was reinitialized: 48000Hz/6ch/floatle Starting playback... Increasing filtered audio buffer size from 0 to 77568 VDec: vo config request - 720 x 576 (preferred colorspace: Planar YV12) Trying filter chain: vo VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is undefined - no prescaling applied. VO Config (720x576->720x576,flags=0,'MPlayer',0x32315659) VO: [yuv4mpeg] 720x576 => 720x576 Planar YV12 VO: Description: yuv4mpeg output for mjpegtools VO: Author: Robert Kesterson <robertk(a)robertk.com> *** [vo] Allocating mp_image_t, 768x576x12bpp YUV planar, 663552 bytes [ffmpeg] aspect_ratio: 0.000000 VDec: vo config request - 720 x 576 (preferred colorspace: Planar YV12) Trying filter chain: vo VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is undefined - no prescaling applied. VO Config (720x576->720x576,flags=0,'MPlayer',0x32315659) VO: [yuv4mpeg] 720x576 => 720x576 Planar YV12 VO: Description: yuv4mpeg output for mjpegtools VO: Author: Robert Kesterson <robertk(a)robertk.com> Unicode font: 2326 glyphs. Unicode font: 2326 glyphs. A: 0.1 V: 0.0 A-V: 0.057 ct: 0.000 1/ 1 ??% ??% ??,?% 0 0 Increasing filtered audio buffer size from 77568 to 77712 XXX initial v_pts=0.000 a_pos=24000 (0.500) *** [vo] Allocating mp_image_t, 768x576x12bpp YUV planar, 663552 bytes A: 0.2 V: 0.1 A-V: 0.108 ct: -0.000 4/ 4 ??% ??% ??,?% 2 0 Increasing filtered audio buffer size from 77712 to 77760 A: 0.4 V: 0.2 A-V: 0.158 ct: -0.000 7/ 7 ??% ??% ??,?% 4 0 Increasing filtered audio buffer size from 77760 to 77808 [ac3 @ 0x577b01a0]incomplete frame 0.019 4683/4683 3% 15% 0.9% 3987 0 A: 187.6 V: 187.3 A-V: 0.282 ct: 0.020 4684/4684 3% 15% 0.9% 3988 0 ds_fill_buffer: EOF reached (stream: audio) A: 187.7 V: 187.4 A-V: 0.259 ct: 0.028 4686/4686 3% 15% 0.9% 3988 0 ds_fill_buffer: EOF reached (stream: audio) ds_fill_buffer: EOF reached (stream: audio) A: 187.7 V: 187.4 A-V: 0.236 ct: 0.032 4687/4687 3% 15% 0.9% 3988 0 ds_fill_buffer: EOF reached (stream: audio) ds_fill_buffer: EOF reached (stream: audio) A: 187.7 V: 187.5 A-V: 0.196 ct: 0.036 4688/4688 3% 15% 0.9% 3988 0 ds_fill_buffer: EOF reached (stream: audio) ds_fill_buffer: EOF reached (stream: audio) A: 187.7 V: 187.5 A-V: 0.156 ct: 0.040 4689/4689 3% 15% 0.9% 3988 0 ds_fill_buffer: EOF reached (stream: audio) ds_fill_buffer: EOF reached (stream: audio) A: 187.7 V: 187.6 A-V: 0.116 ct: 0.044 4690/4690 3% 15% 0.9% 3988 0 ds_fill_buffer: EOF reached (stream: audio) ds_fill_buffer: EOF reached (stream: audio) A: 187.7 V: 187.6 A-V: 0.076 ct: 0.048 4691/4691 3% 15% 0.9% 3988 0 ds_fill_buffer: EOF reached (stream: audio) ds_fill_buffer: EOF reached (stream: audio) ds_fill_buffer: EOF reached (stream: video) A: 187.7 V: 187.6 A-V: 0.076 ct: 0.052 4691/4691 3% 15% 0.9% 3988 0 ds_fill_buffer: EOF reached (stream: audio) ds_fill_buffer: EOF reached (stream: audio) ds_fill_buffer: EOF reached (stream: video) ds_fill_buffer: EOF reached (stream: audio) A: 187.7 V: 187.6 A-V: 0.076 ct: 0.152 4691/4691 3% 15% 0.9% 3988 0 EOF code: 1 Uninit audio filters... [libaf] Removing filter dummy Uninit audio: ffmpeg Uninit video: ffmpeg vo: x11 uninit called but X11 not initialized.. Exiting... (End of file) INFO: [encode2mpeg] encoding to mp2 audio with mctoolame MPlayer SVN-r38447-11.2.0 (C) 2000-2023 MPlayer Team This codecs.conf is too old and incompatible with this MPlayer release! at line 6 do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /dev/shm/svcd_test.iso.wav. libavformat version 60.20.100 (internal) Audio only file format detected. Load subtitles in /dev/shm/ ========================================================================== Forced audio codec: mad Opening audio decoder: [pcm] Uncompressed PCM audio decoder AUDIO: 48000 Hz, 6 ch, floatle, 9216.0 kbit/100.00% (ratio: 1152000->1152000) Selected audio codec: [pcm] afm: pcm (Uncompressed PCM) ========================================================================== [AO PCM] File: /dev/shm/svcd_test.iso_l.pcm (RAW PCM) PCM: Samplerate: 44100Hz Channels: Mono Format s16le [AO PCM] Info: Faster dumping is achieved with -benchmark -vc null -vo null -ao pcm:fast [AO PCM] Info: To write WAVE files use -ao pcm:waveheader (default). AO: [pcm] 44100Hz 1ch s16le (2 bytes per sample) Video: no video Starting playback... A: 187.6 (03:07.6) of 187.0 (03:07.0) 0.6% Exiting... (End of file) MPlayer SVN-r38447-11.2.0 (C) 2000-2023 MPlayer Team This codecs.conf is too old and incompatible with this MPlayer release! at line 6 do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /dev/shm/svcd_test.iso.wav. libavformat version 60.20.100 (internal) Audio only file format detected. Load subtitles in /dev/shm/ ========================================================================== Forced audio codec: mad Opening audio decoder: [pcm] Uncompressed PCM audio decoder AUDIO: 48000 Hz, 6 ch, floatle, 9216.0 kbit/100.00% (ratio: 1152000->1152000) Selected audio codec: [pcm] afm: pcm (Uncompressed PCM) ========================================================================== [AO PCM] File: /dev/shm/svcd_test.iso_r.pcm (RAW PCM) PCM: Samplerate: 44100Hz Channels: Mono Format s16le [AO PCM] Info: Faster dumping is achieved with -benchmark -vc null -vo null -ao pcm:fast [AO PCM] Info: To write WAVE files use -ao pcm:waveheader (default). AO: [pcm] 44100Hz 1ch s16le (2 bytes per sample) Video: no video Starting playback... A: 187.6 (03:07.6) of 187.0 (03:07.0) 0.6% Exiting... (End of file) MPlayer SVN-r38447-11.2.0 (C) 2000-2023 MPlayer Team This codecs.conf is too old and incompatible with this MPlayer release! at line 6 do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /dev/shm/svcd_test.iso.wav. libavformat version 60.20.100 (internal) Audio only file format detected. Load subtitles in /dev/shm/ ========================================================================== Forced audio codec: mad Opening audio decoder: [pcm] Uncompressed PCM audio decoder AUDIO: 48000 Hz, 6 ch, floatle, 9216.0 kbit/100.00% (ratio: 1152000->1152000) Selected audio codec: [pcm] afm: pcm (Uncompressed PCM) ========================================================================== [AO PCM] File: /dev/shm/svcd_test.iso_ls.pcm (RAW PCM) PCM: Samplerate: 44100Hz Channels: Mono Format s16le [AO PCM] Info: Faster dumping is achieved with -benchmark -vc null -vo null -ao pcm:fast [AO PCM] Info: To write WAVE files use -ao pcm:waveheader (default). AO: [pcm] 44100Hz 1ch s16le (2 bytes per sample) Video: no video Starting playback... A: 187.6 (03:07.6) of 187.0 (03:07.0) 0.6% Exiting... (End of file) MPlayer SVN-r38447-11.2.0 (C) 2000-2023 MPlayer Team This codecs.conf is too old and incompatible with this MPlayer release! at line 6 do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /dev/shm/svcd_test.iso.wav. libavformat version 60.20.100 (internal) Audio only file format detected. Load subtitles in /dev/shm/ ========================================================================== Forced audio codec: mad Opening audio decoder: [pcm] Uncompressed PCM audio decoder AUDIO: 48000 Hz, 6 ch, floatle, 9216.0 kbit/100.00% (ratio: 1152000->1152000) Selected audio codec: [pcm] afm: pcm (Uncompressed PCM) ========================================================================== [AO PCM] File: /dev/shm/svcd_test.iso_rs.pcm (RAW PCM) PCM: Samplerate: 44100Hz Channels: Mono Format s16le [AO PCM] Info: Faster dumping is achieved with -benchmark -vc null -vo null -ao pcm:fast [AO PCM] Info: To write WAVE files use -ao pcm:waveheader (default). AO: [pcm] 44100Hz 1ch s16le (2 bytes per sample) Video: no video Starting playback... A: 187.6 (03:07.6) of 187.0 (03:07.0) 0.6% Exiting... (End of file) MPlayer SVN-r38447-11.2.0 (C) 2000-2023 MPlayer Team This codecs.conf is too old and incompatible with this MPlayer release! at line 6 do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /dev/shm/svcd_test.iso.wav. libavformat version 60.20.100 (internal) Audio only file format detected. Load subtitles in /dev/shm/ ========================================================================== Forced audio codec: mad Opening audio decoder: [pcm] Uncompressed PCM audio decoder AUDIO: 48000 Hz, 6 ch, floatle, 9216.0 kbit/100.00% (ratio: 1152000->1152000) Selected audio codec: [pcm] afm: pcm (Uncompressed PCM) ========================================================================== [AO PCM] File: /dev/shm/svcd_test.iso_c.pcm (RAW PCM) PCM: Samplerate: 44100Hz Channels: Mono Format s16le [AO PCM] Info: Faster dumping is achieved with -benchmark -vc null -vo null -ao pcm:fast [AO PCM] Info: To write WAVE files use -ao pcm:waveheader (default). AO: [pcm] 44100Hz 1ch s16le (2 bytes per sample) Video: no video Starting playback... A: 187.6 (03:07.6) of 187.0 (03:07.0) 0.6% Exiting... (End of file) MPlayer SVN-r38447-11.2.0 (C) 2000-2023 MPlayer Team This codecs.conf is too old and incompatible with this MPlayer release! at line 6 do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /dev/shm/svcd_test.iso.wav. libavformat version 60.20.100 (internal) Audio only file format detected. Load subtitles in /dev/shm/ ========================================================================== Forced audio codec: mad Opening audio decoder: [pcm] Uncompressed PCM audio decoder AUDIO: 48000 Hz, 6 ch, floatle, 9216.0 kbit/100.00% (ratio: 1152000->1152000) Selected audio codec: [pcm] afm: pcm (Uncompressed PCM) ========================================================================== [AO PCM] File: /dev/shm/svcd_test.iso_lfe.pcm (RAW PCM) PCM: Samplerate: 44100Hz Channels: Mono Format s16le [AO PCM] Info: Faster dumping is achieved with -benchmark -vc null -vo null -ao pcm:fast [AO PCM] Info: To write WAVE files use -ao pcm:waveheader (default). AO: [pcm] 44100Hz 1ch s16le (2 bytes per sample) Video: no video Starting playback... A: 187.6 (03:07.6) of 187.0 (03:07.0) 0.6% Exiting... (End of file) ISO MPEG Audio Subgroup Software Simulation Group (1996) ISO 13818-3 MPEG-2 Audio Multichannel Encoder $Revision: 2.0 $ Num. ch: 6 Sample frames 8275267 Sample size in bits 16 Sample rate 44100.000000 Sound data is not PCM in "/dev/shm/svcd_test.iso.aiff". >>> Using 3/2 configuration. Encoding configuration: Layer=II mode=stereo extn=0 psy model=1 samp frq=44.1 kHz mpeg1 bitrate=384 kbps No multilingual coding. de-emph=0 c/right=0 orig=0 errprot=0 matrix=0 center=1 surround=2 stereo=2 stereomc=3 stereoaug=0 input file: '/dev/shm/svcd_test.iso.aiff' output file: '/dev/shm/svcd_test.iso.aiff.mp2' INFO: [mplex] mplex version 2.2.1 (2.2.7 $Date: 2012-11-17 01:55:16 $) INFO: [mplex] File /dev/shm/svcd_test.iso.mpv looks like an MPEG Video stream. INFO: [mplex] File /dev/shm/svcd_test.iso.mpa looks like an MPEG Audio stream. INFO: [mplex] Found 1 audio streams, 1 video streams and 0 subtitle streams INFO: [mplex] Selecting SVCD output profile INFO: [mplex] Multiplexing video program stream! INFO: [mplex] Scanning for header info: Video stream e0 (/dev/shm/svcd_test.iso.mpv) INFO: [mplex] VIDEO STREAM: e0 INFO: [mplex] Frame width : 480 INFO: [mplex] Frame height : 576 INFO: [mplex] Aspect ratio : 4:3 display INFO: [mplex] Picture rate : 25.000 frames/sec INFO: [mplex] Bit rate : 2500000 bits/sec INFO: [mplex] Vbv buffer size : 114688 bytes INFO: [mplex] CSPF : 0 INFO: [mplex] Scanning for header info: Audio stream c0 (/dev/shm/svcd_test.iso.mpa) INFO: [mplex] MPEG AUDIO STREAM: c0 INFO: [mplex] Audio version : 1.0 INFO: [mplex] Layer : 2 INFO: [mplex] CRC checksums : no INFO: [mplex] Bit rate : 49152 bytes/sec (384 kbit/sec) INFO: [mplex] Frequency : 44100 Hz INFO: [mplex] Mode : 0 stereo INFO: [mplex] Mode extension : 0 INFO: [mplex] Copyright bit : 0 no copyright INFO: [mplex] Original/Copy : 0 copy INFO: [mplex] Emphasis : 0 none INFO: [mplex] SYSTEMS/PROGRAM stream: INFO: [mplex] rough-guess multiplexed stream data rate : 2953744 INFO: [mplex] target data-rate specified : 11536000 INFO: [mplex] Setting specified specified data rate: 11536000 INFO: [mplex] Run-in delay = 3600 Video delay = 3600 Audio delay = 7200 INFO: [mplex] New sequence commences... INFO: [mplex] Video e0: buf= 0 frame=000000 sector=00000000 INFO: [mplex] Audio c0: buf= 0 frame=000000 sector=00000000 INFO: [mplex] Scanned to end AU 4690 INFO: [mplex] STREAM e0 completed INFO: [mplex] STREAM c0 completed INFO: [mplex] Multiplex completion at SCR=16892643. INFO: [mplex] Video e0: completed INFO: [mplex] Audio c0: completed INFO: [mplex] VIDEO_STATISTICS: e0 INFO: [mplex] Video Stream length: 29963178 bytes INFO: [mplex] Sequence headers: 313 INFO: [mplex] Sequence ends : 1 INFO: [mplex] No. Pictures : 4691 INFO: [mplex] No. Groups : 313 INFO: [mplex] No. I Frames : 313 avg. size 16371 bytes INFO: [mplex] No. P Frames : 4378 avg. size 5673 bytes INFO: [mplex] No. B Frames : 0 avg. size 0 bytes INFO: [mplex] Average bit-rate : 1277200 bits/sec INFO: [mplex] Peak bit-rate : 2422400 bits/sec INFO: [mplex] BUFFERING min 15 Buf max 72625 INFO: [mplex] AUDIO_STATISTICS: c0 INFO: [mplex] Audio stream length 9007857 bytes. INFO: [mplex] Syncwords : 7184 INFO: [mplex] Frames : 879 padded INFO: [mplex] Frames : 6305 unpadded INFO: [mplex] BUFFERING min 15 Buf max 1268 INFO: [mplex] MUX STATUS: no under-runs detected. ++ WARN: string '/dev/shm/svcd_test.iso' fails d-character constraint (pos = 0) MPEG: VIDEO: MPEG2 480x576 (aspect 2) 25.000 fps 2500.0 kbps (312.5 kbyte/s) ### LOG: /dev/shm/svcd_test.iso [2024-02-01 03:42:56] INFO: [encode2mpeg] version 0.6.4 running in DIRECT Mode (cpu=4) INFO: [encode2mpeg] command line: '-svcd -mp2 mctoolame -mpegchannels 6 -n p -imageonly /dev/shm/matrixbench_highdivx_ac3.avi -o /dev/shm/svcd_test.iso' ++ WARN: [encode2mpeg] total video+audio bitrate (2500+393kbps) exceed SVCD specifications (2778kbps) MPEG: frameformat:SVCD split:800 vfr:3 vbr:2500 abr:384 asr:44100 mpegchannels:6 audioformat:mp2 mp2:mctoolame mpegencoder:mpeg2enc INFO: [identify] ID_VIDEO_ID=0 INFO: [identify] ID_AUDIO_ID=1 INFO: [identify] ID_VIDEO_CODEC=ffdivx INFO: [identify] ID_CLIP_INFO_NAME0=Software INFO: [identify] ID_CLIP_INFO_VALUE0=Nandub v1.0rc2 INFO: [identify] ID_CLIP_INFO_NAME1=Title INFO: [identify] ID_CLIP_INFO_VALUE1=The Matrix Clip INFO: [identify] ID_CLIP_INFO_NAME2=Subject INFO: [identify] ID_CLIP_INFO_VALUE2=The Matrix Clip INFO: [identify] ID_CLIP_INFO_NAME3=Artist INFO: [identify] ID_CLIP_INFO_VALUE3= INFO: [identify] ID_CLIP_INFO_NAME4=Copyright INFO: [identify] ID_CLIP_INFO_VALUE4= INFO: [identify] ID_CLIP_INFO_NAME5=Comments INFO: [identify] ID_CLIP_INFO_VALUE5=dolby digital 5.1 audiostream INFO: [identify] ID_CLIP_INFO_N=6 INFO: [identify] ID_FILENAME=/dev/shm/matrixbench_highdivx_ac3.avi INFO: [identify] ID_DEMUXER=avi INFO: [identify] ID_VIDEO_FORMAT=DIV3 INFO: [identify] ID_VIDEO_BITRATE=1655680 INFO: [identify] ID_VIDEO_WIDTH=720 INFO: [identify] ID_VIDEO_HEIGHT=576 INFO: [identify] ID_VIDEO_FPS=25.000 INFO: [identify] ID_VIDEO_ASPECT=0.0000 INFO: [identify] ID_AUDIO_FORMAT=8192 INFO: [identify] ID_AUDIO_BITRATE=384000 INFO: [identify] ID_AUDIO_RATE=0 INFO: [identify] ID_AUDIO_NCH=0 INFO: [identify] ID_START_TIME=0.00 INFO: [identify] ID_LENGTH=187.64 INFO: [identify] ID_SEEKABLE=1 INFO: [identify] ID_CHAPTERS=0 INFO: [identify] ID_AUDIO_RATE=48000 INFO: [identify] ID_AUDIO_NCH=2 INFO: [identify] ID_AUDIO_CODEC=ffac3 INFO: [identify] ID_EXIT=EOF INFO: [MPLAYERYUVOPT] /dev/shm/matrixbench_highdivx_ac3.avi -channels 6 -noframedrop -v -osdlevel 0 -vo yuv4mpeg:file=/dev/fd/4 -ao pcm:waveheader:fast:file=%26%/dev/shm/svcd_test.iso.wav INFO: [YUVSCALEROPT] -v 1 -n p -O SVCD INFO: [MPEG2ENCOPT] -f 5 -b 2500 -V 113 -B 424 -4 2 -2 1 -g 6 -G 15 -M 4 -v 1 -S 800 -n p -F 3 -s -r 16 INFO: [MPLEXOPT] -f 5 -V -b 113 -r 11536 INFO: [VCDIMAGEROPT] -t svcd INFO: [CDRDAOOPT] --driver generic-mmc --device 0,0,0 INFO: [GROWISOFSOPT] -dvd-compat -Z /dev/cdrecorder -dvd-video ++ WARN: [encode2mpeg] selected aspect ratio [4/3] and source aspect ratio [undefined] are different INFO: [mplayer] MPlayer SVN-r38447-11.2.0 (C) 2000-2023 MPlayer Team INFO: [mplayer] ==> Found video stream: 0 INFO: [mplayer] ==> Found audio stream: 1 INFO: [yuvscaler] yuvscaler 2.2.1 11-Dec-2007 INFO: [yuvscaler] (C) 2001-2004 Xavier Biquard <xbiquard(a)free.fr>, yuvscaler -h for help, or man yuvscaler INFO: [yuvscaler] SVCD output format requested in PAL/SECAM norm INFO: [yuvscaler] input: frame size: 720x576 pixels (622080 bytes) INFO: [yuvscaler] input: chroma: 4:2:0 JPEG/MPEG-1 (interstitial) INFO: [yuvscaler] input: frame rate: 25/1 fps (~25.000000) INFO: [yuvscaler] input: interlace: none/progressive INFO: [yuvscaler] input: sample aspect ratio: 1:1 INFO: [yuvscaler] from 720x576, take 720x576+0+0, NOT_INTERLACED/PROGRESSIVE INFO: [yuvscaler] scale to 480x576, 480x576 being displayed INFO: [yuvscaler] Scaling uses the RESAMPLE algorithm, INFO: [yuvscaler] frame rate: 25.000 fps INFO: [yuvscaler] Scaling ratio for width is 3 to 2 INFO: [yuvscaler] and is 1 to 1 for height INFO: [yuvscaler] Specific downscaling routing number 6 INFO: [yuvscaler] output: frame size: 480x576 pixels (414720 bytes) INFO: [yuvscaler] output: chroma: 4:2:0 JPEG/MPEG-1 (interstitial) INFO: [yuvscaler] output: frame rate: 25/1 fps (~25.000000) INFO: [yuvscaler] output: interlace: none/progressive INFO: [yuvscaler] output: sample aspect ratio: 3:2 INFO: [yuvscaler] Frame number 0 INFO: [mpeg2enc] SETTING EXTENDED MMX for MOTION! INFO: [mpeg2enc] SETTING SSE and MMX for TRANSFORM! INFO: [mpeg2enc] SETTING EXTENDED MMX for PREDICTION! INFO: [mpeg2enc] Selecting Stretched SVCD output profile ++ WARN: [mpeg2enc] No aspect ratio specifed and no guess possible: assuming 4:3 display aspect! INFO: [mpeg2enc] Progressive input - selecting progressive encoding. ++ WARN: [mpeg2enc] Generating dummy SVCD scan-data offsets to be filled in by "vcdimager" ++ WARN: [mpeg2enc] If you're not using vcdimager you may wish to turn this off using -d INFO: [mpeg2enc] Encoding MPEG-2 video to /dev/shm/svcd_test.iso.mpv INFO: [mpeg2enc] Horizontal size: 480 pel INFO: [mpeg2enc] Vertical size: 576 pel INFO: [mpeg2enc] Aspect ratio code: 2 = 4:3 display INFO: [mpeg2enc] Frame rate code: 3 = 25.0 (PAL/SECAM VIDEO / converted FILM) INFO: [mpeg2enc] Bitrate: 2500 KBit/s INFO: [mpeg2enc] Quality factor: 8 (Quantisation = 9) (1=best, 31=worst) INFO: [mpeg2enc] Field order for input: none/progressive INFO: [mpeg2enc] New Sequence every 800 Mbytes INFO: [mpeg2enc] Assuming non-video stream of 424 Kbps INFO: [mpeg2enc] Search radius: 16 INFO: [mpeg2enc] DualPrime: no INFO: [mpeg2enc] Using one-pass rate controller INFO: [mpeg2enc] GOP SIZE RANGE 6 TO 15 INFO: [mpeg2enc] Quant code = 9 quantizer-scale = 8 INFO: [mpeg2enc] Setting colour/gamma parameters to "PAL B/G" INFO: [mpeg2enc] Progressive format frames = 1 INFO: [mpeg2enc] q_scale_type = 1 INFO: [mpeg2enc] Using default unmodified quantization matrices INFO: [mpeg2enc] SETTING MMX and MMX for QUANTIZER! INFO: [mpeg2enc] NEW GOP INIT length 15 INFO: [encode2mpeg] encoding to mp2 audio with mctoolame INFO: [mctoolame] ISO MPEG Audio Subgroup Software Simulation Group (1996) INFO: [mctoolame] ISO 13818-3 MPEG-2 Audio Multichannel Encoder INFO: [mctoolame] $Revision: 2.0 $ INFO: [mctoolame] Num. ch: 6 INFO: [mctoolame] Sample frames 8275267 INFO: [mctoolame] Sample size in bits 16 INFO: [mctoolame] Sample rate 44100.000000 INFO: [mctoolame] Sound data is not PCM in "/dev/shm/svcd_test.iso.aiff". INFO: [mctoolame] >>> Using 3/2 configuration. INFO: [mctoolame] Encoding configuration: INFO: [mctoolame] Layer=II mode=stereo extn=0 psy model=1 INFO: [mctoolame] samp frq=44.1 kHz mpeg1 bitrate=384 kbps INFO: [mctoolame] No multilingual coding. INFO: [mctoolame] de-emph=0 c/right=0 orig=0 errprot=0 INFO: [mctoolame] matrix=0 center=1 surround=2 stereo=2 stereomc=3 stereoaug=0 INFO: [mctoolame] input file: '/dev/shm/svcd_test.iso.aiff' output file: '/dev/shm/svcd_test.iso.aiff.mp2' INFO: [mplex] mplex version 2.2.1 (2.2.7 $Date: 2012-11-17 01:55:16 $) INFO: [mplex] File /dev/shm/svcd_test.iso.mpv looks like an MPEG Video stream. INFO: [mplex] File /dev/shm/svcd_test.iso.mpa looks like an MPEG Audio stream. INFO: [mplex] Found 1 audio streams, 1 video streams and 0 subtitle streams INFO: [mplex] Selecting SVCD output profile INFO: [mplex] Multiplexing video program stream! INFO: [mplex] Scanning for header info: Video stream e0 (/dev/shm/svcd_test.iso.mpv) INFO: [mplex] VIDEO STREAM: e0 INFO: [mplex] Frame width : 480 INFO: [mplex] Frame height : 576 INFO: [mplex] Aspect ratio : 4:3 display INFO: [mplex] Picture rate : 25.000 frames/sec INFO: [mplex] Bit rate : 2500000 bits/sec INFO: [mplex] Vbv buffer size : 114688 bytes INFO: [mplex] CSPF : 0 INFO: [mplex] Scanning for header info: Audio stream c0 (/dev/shm/svcd_test.iso.mpa) INFO: [mplex] MPEG AUDIO STREAM: c0 INFO: [mplex] Audio version : 1.0 INFO: [mplex] Layer : 2 INFO: [mplex] CRC checksums : no INFO: [mplex] Bit rate : 49152 bytes/sec (384 kbit/sec) INFO: [mplex] Frequency : 44100 Hz INFO: [mplex] Mode : 0 stereo INFO: [mplex] Mode extension : 0 INFO: [mplex] Copyright bit : 0 no copyright INFO: [mplex] Original/Copy : 0 copy INFO: [mplex] Emphasis : 0 none INFO: [mplex] SYSTEMS/PROGRAM stream: INFO: [mplex] rough-guess multiplexed stream data rate : 2953744 INFO: [mplex] target data-rate specified : 11536000 INFO: [mplex] Setting specified specified data rate: 11536000 INFO: [mplex] Run-in delay = 3600 Video delay = 3600 Audio delay = 7200 INFO: [mplex] New sequence commences... INFO: [mplex] Video e0: buf= 0 frame=000000 sector=00000000 INFO: [mplex] Audio c0: buf= 0 frame=000000 sector=00000000 INFO: [mplex] Scanned to end AU 4690 INFO: [mplex] STREAM e0 completed INFO: [mplex] STREAM c0 completed INFO: [mplex] Multiplex completion at SCR=16892643. INFO: [mplex] Video e0: completed INFO: [mplex] Audio c0: completed INFO: [mplex] VIDEO_STATISTICS: e0 INFO: [mplex] Video Stream length: 29963178 bytes INFO: [mplex] Sequence headers: 313 INFO: [mplex] Sequence ends : 1 INFO: [mplex] No. Pictures : 4691 INFO: [mplex] No. Groups : 313 INFO: [mplex] No. I Frames : 313 avg. size 16371 bytes INFO: [mplex] No. P Frames : 4378 avg. size 5673 bytes INFO: [mplex] No. B Frames : 0 avg. size 0 bytes INFO: [mplex] Average bit-rate : 1277200 bits/sec INFO: [mplex] Peak bit-rate : 2422400 bits/sec INFO: [mplex] BUFFERING min 15 Buf max 72625 INFO: [mplex] AUDIO_STATISTICS: c0 INFO: [mplex] Audio stream length 9007857 bytes. INFO: [mplex] Syncwords : 7184 INFO: [mplex] Frames : 879 padded INFO: [mplex] Frames : 6305 unpadded INFO: [mplex] BUFFERING min 15 Buf max 1268 INFO: [mplex] MUX STATUS: no under-runs detected. ++ WARN: [vcdxbuild] string '/dev/shm/svcd_test.iso' fails d-character constraint (pos = 0) MPEG: VIDEO: MPEG2 480x576 (aspect 2) 25.000 fps 2500.0 kbps (312.5 kbyte/s) MPEG: AUDIO[0]: MPEG 1.0 layer II, 384 kbit/s, 44100 Hz stereo MPEG: /dev/shm/svcd_test.iso01.mpg is 39784556 bytes, 37.9 MB JOBEND: /dev/shm/svcd_test.iso [2024-02-01 03:44:12] (0h1m16s) Warnings summary: ++ WARN: [encode2mpeg] total video+audio bitrate (2500+393kbps) exceed SVCD specifications (2778kbps) ++ WARN: [encode2mpeg] selected aspect ratio [4/3] and source aspect ratio [undefined] are different ++ WARN: [mpeg2enc] No aspect ratio specifed and no guess possible: assuming 4:3 display aspect! ++ WARN: [mpeg2enc] Generating dummy SVCD scan-data offsets to be filled in by "vcdimager" ++ WARN: [mpeg2enc] If you're not using vcdimager you may wish to turn this off using -d ++ WARN: [vcdxbuild] string '/dev/shm/svcd_test.iso' fails d-character constraint (pos = 0) ======== so it renders 3x realtime :)

1 0

OpenGL texture limit 0
by Andrea paz 01 Feb '24

01 Feb '24

There is a request in the forum for an explanation of a warning window. Is anyone able to understand the problem? https://www.cinelerra-gg.org/forum/forum-miscellaneous/opengl-texture-limit…

2 1